• Archives of Plastic Surgery
• /
• 제41권3호
• /
• pp.271-276
• /
• 2014

Background As the obese population increases in Korea, the number of patients who are trying to lose weight has been increasing steadily. In these patients, skin laxity and deformation of the body contour occurs, which could possibly be corrected by various body contouring surgeries. Here, we introduce the brachioplasty method and our experience of various body contouring surgeries performed in our center. Methods From November 2009 to August 2011, five cases of brachioplasty were performed. When the patient presented with sagging of the lateral inframammary crease and bat wing deformity in the axilla, extended brachioplasty was performed; in this case, the deformation of the axilla and lateral chest was corrected at the same time. A traditional brachioplasty was performed when contouring was needed only for skin laxity in the upper arm. Results Complications, such as hematomas or nerve injuries, were not evident. Some patients experienced partial wound dehiscence due to tension or hypertrophic scars found during the follow-up. In general, all of the patients were satisfied with the improvement in their upper arm contour. Conclusions Given the demands for body contouring surgery, the number of brachioplasty surgical procedures is expected to increase significantly, with abdominoplasty comprising a large portion of these surgeries. For the brachioplasty procedure, preparation and preoperative consultation regarding design of the surgery by experienced surgeons was important to prevent complications such as nerve damage or hematoma formation.

• Steel and Composite Structures
• /
• 제37권1호
• /
• pp.15-26
• /
• 2020

The top-and-seat angles with double web angles are commonly used in the design of beam-to-column joints in Asian and North American countries. The seismic behavior analysis of these joints with large cross-section size of beam and column (often connected by four or more bolts) is a challenge due to the effects from the relatively larger size of stiffened angles and the composite action from the adjacent concrete slab. This paper presents an experimental investigation on the seismic performance of exterior composite beam-to-column joints with stiffened angles under cyclic loading. Four full-scale composite joints with different configuration (only one specimen contain top angle in concrete slab) were designed and tested. The joint specimens were designed by considering the effects of top angles, longitudinal reinforcement bars and arrangement of bolts. The behavior of the joints was carefully investigated, in terms of the failure modes, slippage, backbone curves, strength degradation, and energy dissipation abilities. It was found that the slippage between top-and-seat angles and beam flange, web angle and beam web led to a notable pinching effect, in addition, the ability of the energy dissipation was significantly reduced. The effect of anchored beams on the behavior of the joints was limited due to premature failure in concrete, the concrete slab that closes to the column flange and upper flange of beam plays an significant role when the joint subjected to the sagging moment. It is demonstrated that the ductility of the joints was significantly improved by the staggered bolts and welded longitudinal reinforcement bars.

• Steel and Composite Structures
• /
• 제28권3호
• /
• pp.363-380
• /
• 2018

This paper presented an integral design procedure for demountable bolted composite frames with semi-rigid joints. Moment-rotation relationships of beam-to-column joints were predicted with analytical models aiming to provide accurate and reliable analytical solutions. Among this, initial stiffness of beam-to-column joints was derived on the basis of Timoshenko's plate theory, and moment capacity was derived in accordance with Eurocodes. The predictions were validated with relevant test results prior to further applications. Frame analysis was conducted by using Abaqus software with material and geometrical nonlinearity considered. Variable lateral loads incorporating wind actions and earthquake actions in accordance with Australian Standards were adopted to evaluate the flexural behaviour of the composite frames. Strength and serviceability limit state criteria were utilized to verify configurations of designed models. A wide range of frames with the varied number of storeys and bays were thereafter programmed to ascertain bending moment envelopes under various load combinations. The analytical results suggest that the proposed approach is capable of predicting the moment-rotation performance of the semi-rigid joints reasonably well. Outcomes of the frame analysis indicate that the load combination with dead loads and live loads only leads to maximum sagging and hogging moment magnitudes in beams. As for lateral loads, wind actions are more crucial to dominate the design of the demountable composite frames than earthquake actions. No hogging moment reversal is expected in the composite beams given that the frames are designed properly. The proposed analysis procedure is demonstrated to be a simple and efficient method, which can be applied into engineering practice.

• 복식문화연구
• /
• 제25권4호
• /
• pp.476-487
• /
• 2017

The purpose of this study was to suggest torso patterns that fit the three main body shapes of elderly obese women. To reduce time, costs, and also the trial and error needed to make patterns, the CLO program for 3D test wear was employed. Three virtual models for aged obese women were use, with the YUKA system used to produce torso patterns. 3D simulation of test wear and corrections was done to design optimal torso patterns. The results were as follows: First, for the three models of obese women's body shapes as realized by CLO 3D, Type 1 is lower-body obesity shapes, Type 2 is abdominal obesity shapes, and Type 3 is whole-body obesity shapes. Second, to design the study patterns, actual measurement values, back waist length and waist to hip length, were used. The armhole depth (B/4-1.5), front interscye (B/6+2.3), front neck width (B/12-0.5), front neck depth (B/12+0.5), front waist measurement (W/4+ 1.5+D), front hip measurement (H/4+2+0.5), and back hip measurement (H/4+3-0.5) were calculated using formulas. Third, according to the results of test-wearing the study patterns, reduced front neck width and depth improved the neck fit and reduced armhole depth bettered loose or plunging armhole girth and also reduced the sagging of bust c.. Also, tight sidesfrom aprotruded waist and abdomen improved with the increase of surpluses in the back waist and also back and front hip c. The exterior was enhanced by displacement of back and front darts, which distributed surpluses better.

• 터널과지하공간
• /
• 제19권5호
• /
• pp.388-396
• /
• 2009

록볼트는 지하공동 굴착시 암반의 과도한 이완을 초기에 방지할 수 있는 가장 중요한 터널 지보재 중 하나이다. 국내외에서 록볼트의 설치에 따른 침하저감 및 보강효과, 다양한 록볼트 형태에 따른 터널 안정성 증대효과 등 록볼트 지보효과에 대한 많은 연구는 있으나, 록볼트에 긴장력을 가함으로써 절리암반의 지반보강 효과에 대한 연구는 미흡한 실정이다. 본 연구에서는 수평절리암반을 모사한 모형지반에서 록볼트의 긴장력 및 설치간격을 변수로 하여 대형모형실험을 실시하여, 록볼트에 의한 지반 보강효과를 확인하였다. 록볼트의 긴장력에 의한 절리암반 보강효과를 확인하기 위하여 단순보를 조성하여 긴장력과 설치간격을 변수로 하였다. 굴착에 따른 모형지반 중앙하부 처짐량을 측정하여 록볼트로 보강된 보강영역의 지반변형계수를 도출하였다.

• 대한치과의사협회지
• /
• 제54권10호
• /
• pp.811-819
• /
• 2016

범안면골 골절은 안면부 손상 그 자체로도 치료가 까다롭고 어렵지만, 동반된 다른 신체 중요 장기의 손상 등과 함께 치료 후 에도 남을 수 있는 안면의 심미적, 기능적 문제들 때문에 더욱 치료가 힘들어 질 수 있다. 뇌손상 등의 중요 장기 손상으로 인해 수술이 빠른 시일 내에 시행되지 못할 때에는 관련 의학분과와의 긴밀한 협진 하에 수술 전 처치가 이루어질 수 있도록 하여야 하며, 연조직을 포함한 골절편 등 안면 구조물들이 손상되지 않고 전체적인 형태를 유지할 수 있도록 응급 처치가 되어야 한다. 3D CT 등의 영상진단을 통해 안면골 골절을 치료하기 위한 전체적인 계획을 수립해야 한다. 이 계획에는 수술을 위한 기도확보 방법, 골절의 정복 고정 순서, 접근 방법, 안구, 코 등의 재건 방법 그리고 연조직에 손상에 대한 처치가 포함된다. 수술 시에는 환자 개개인의 상황에 맞춰 되도록 정확한 정복과 고정이 가능한 안면구조물에서 부터 시작하여 교합을 형성하고, 안면골의 유기적인 관계에 유의하여 삼차원적인 구조를 재위치 시킬 수 있도록 해야 한다. 연조직 봉합 시에는 얼굴 피부의 처짐 등을 방지하기 위해 골막, 근막 및 중요 안면 인대들을 고려하여 시행하여야 한다.

• 복식문화연구
• /
• 제22권2호
• /
• pp.290-299
• /
• 2014

This research sought to analyze the characteristics of breast movement at the treadmill activity levels. It also examined the effect of wearing a sports bra in reducing breast displacement. The subjects for the data collection were females in their 20s (n=2) with C-cup size breast. The experimental conditions were three different moving speeds (4 km/h, jogging: 7 km/h, and sprinting: 10 km/h) and two types of sports bras. Three dimensional breast displacement was measured. The displacement of the right nipple point was measured with a 3D motion analyzer. The results show that the breasts were greatly displaced from the walking speed (4 km/h) when subjects did not wear any bra. Whereas their breast displacement distance decreased remarkably when they wore sports bras. The nipple point moved 42~44 mm in the vertical direction at walking speed with naked condition. But it was reduced by 80% after wearing sports bras. When subjects running (7 km/h, 10 km/h) without any bra, the nipple point moved 122~141 mm. However it was reduced by 60~70% when they wore sports bras. The apartment time (time delay) between at the highest point of the upper body and the nipple was 0.25 seconds at the running speeds (7 km/h, 10 km/h) without wearing any bra. After wearing sports bras, the time delay was cut to 0.06~0.12 seconds. These results implies that without wearing any bra the skin surrounding the breasts might be seriously pulled at running activity. The functional sports bra suppress breast movement. It might prevent the sagging of breasts by preventing the damage of the Cooper's ligaments.

• 복식문화연구
• /
• 제14권1호
• /
• pp.79-92
• /
• 2006

This study was purposed to present the basic data on the elderly women's somatotype to develop new briefs design with high body-adaptability. The subjects were 115 elderly women in the 60s and 70s and the factor analysis for 32 directly measured values of the body parts was carried out to sort out the constituent factors of the elderly women's bodies, and finally 4 factors were decided. The first factor was the thickness of the trunk and the degree of the obesity in the center of the width, thickness and circumference. The second factor is the perpendicular size of the body with high loads on the longitudinal direction of the body. The third factor was the leg shape. The last factor was the degree of the sagging hip. The elderly women's somatotype was classified into 3 types. The first type was the 'mean somatotype' with the biggest height and the longest lower half body of the three types. The second type was the 'obese somatotype' with the mean height and length of the lower body and with the largest circumference and width. The last type was the 'skinny somatotype' with the smallest values of all the items in the perpendicular size and the degree of the obesity.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제21권4호
• /
• pp.345-352
• /
• 1999

This study was conducted for the purpose of suggestion of the new technique of sagittal split ramus osteotomy pararell to the true sagittal plane. This pararellism is the important concept of the sagittal split ramus osteotomy to reduce the condylar sagging including mandibular hypomobility, temporomandibular disorder, occlusal relapse and other complications. We used 26 adult dry manibles(52 rami), and obtained the computed tomographs through the sagittal, horizontal and coronal sections. The results were obtained as follows. 1. On sagittal section, mean area of S1 was $8.63{\pm}2.10cm^2$, S2 was $8.93{\pm}1.94cm^2$, S3 was $9.49{\pm}2.15cm^2$, S6 was $10.72{\pm}2.22cm^2$. The wider area of sagittal section, the more lateral section, But, no significant differency between the areas of the sagittal sections(P>0.05). 2. On horizontal section, The distance between the inferior alveolar canal and the lateral cortical plate of the mandibular ramus were $6.73{\pm}1.24mm$ minum, $7.70{\pm}1.44mm$ maximum. 3. On coronal section, Outer mandibular angle were $4.84{\pm}2.37^{\circ}$ right side, $4.93{\pm}2.12^{\circ}$ left side. 4. The design of the ideal true sagittal split ramus osteotomy is that posterior border of osteotomy must be limited vertically, at the right posterior point of lingula mandibularis and anterior of osteotomy must be extended to mandibular body, anteroinferiorly.

• 대한화장품학회:학술대회논문집
• /
• 대한화장품학회 2003년도 IFSCC Conference Proceeding Book II
• /
• pp.529-543
• /
• 2003

Real-time measurements of skin movement induced by air blown on the surface was measured with time. We investigated age-related changes in displacement of the skin surface on the face or the inner upper arm caused by air on 98 Japanese women volunteers aged from 10 to 70 years old. The maximum distance (the denting state) that the skin moved reached 2-5 mm within 10-15 msec on the cheek skin. After that, the skin generally recovered to the original state within 40-50 msec. The maximum speed of movement was 0.5 m/sec and the recovery speed was about 0.25 m/sec on the cheek skin. Significant changes with age were not observed in the denting state, but a significant correlation with age was observed in the recovery state. For example, the maximum recovery speed decreased significantly with age (p=-0.568, p<0.001) and the time required for recovery increased significantly with age (p=0.561, p<0.001). Although the inner upper arm also showed similar results to a cheek, a few parameters were different. This apparatus is a more practical macroscopic system for evaluating skin mechanical properties without contact. This apparatus is effective not only for measuring the mechanical properties of facial skin but also of body skin, such as swelling or sagging of body parts.