• 대한간호학회지
• /
• 제32권3호
• /
• pp.317-326
• /
• 2002

The purpose of this study was to verify the effect of aromatherapy on the stress response in menstrual period. Method: A randomized, single-blind, pretest- posttest design was used. The study subjects were 60 college women with dysmenorrhea and they were randomized into 3 groups, experimental, 1st control(placebo) and 2nd control group. The researchers massaged treatment oil(3% dilution essential oil of Lavender, Clary sage and Rose) into the abdomen of experimental group. The placebo group used almond oil(carrier oil) instead, and the 2nd control group did not give any treatment. Baseline data including pre-treatment stress response score were obtained on the first day of usual period. Aromatherapy provided for about 7 days until the next cycle began. Post-treatment stress responses were measured by 94 item SOS(symptom of stress) scale on the first day of the cycle. Results: As a results, the stress response score of experimental group was significantly lower than two control groups. And there was no significant difference in stress responses of two control groups. Conclusion: The results show aromatherapy using selected essential oils to be an effective intervention for stress response during menstruation.

• 여성건강간호학회지
• /
• 제17권3호
• /
• pp.195-204
• /
• 2011

Purpose: The purpose of this study was to determine the effects of the spouse's aromatherapy massage on labor pain, anxiety during labor and childbirth satisfaction for laboring women. Methods: The subjects of this study were laboring women who didn't have any complication during pregnancy and who have admitted for childbirth with their spouse to E. hospital in D city. This study was carried out from June to November in 2007. The subjects were allocated into three groups: spouse's aromatherapy massage group, spouse's carrier oil massage group and control group. Aromatherapy massage and carrier oil massage was applied for ten minutes every hour after the cervix dilated 5cm. The subjects in the control group were with their spouse during labor. Results: The labor pain by VAS was significantly different among the three groups (Kruskal-Wallis $x^2$=7.09 p=.029) in the deceleration phase. The anxiety during labor by VAS were significantly different among the three groups (Kruskal-Wallis $x^2$=6.77 p=.034) in the deceleration phase. There was no significant difference in childbirth satisfaction among the three groups. Conclusion: The spouse's aromatherapy massage using Lavender, Clary sage, Frankincense and Neroli could be effective in decreasing labor pain and decreasing anxiety level during labor.

• 한국식품저장유통학회지
• /
• 제5권1호
• /
• pp.81-87
• /
• 1998

Antimicrobial activities of the extracts from spices microorganisms related to kimchi fermentation were investigated. 32 kinds of spices such as allspice, mount, basil, bay leaves, caraway, cardamon, celery, chilli powder, chives, cinnamon, clover, coriander, cumin, dill, fennel, garlic, horseradish, marjorarm, mugwort, mustard, nutmeg, onion, oregano, paprika, parsely, pepper, peppermint, rosemary, sage, tarragon, thyme and tumeric were extracted with water, ethyl ether, ethyl acetate and ethanol. Fractions were tested for antimicrobial activities against Lactobacillus plantarum and Leuconostoc mesenteroides, The extracts of 28 kinds of spices except caraway, cardamon, paprika and tarragon by water extraction, those of 29 kinds except arrowroot, paprika and tarragon by ethyl ether extraction, those of 30 kinds except paprika and tarragon by ethyl acetate extraction, and those of 29 kinds except clover, paprika and tarragon by ethanol extraction showed strong antimicrobial activities against Lactobacillus plantarum. On the other hand, the extracts of 28 kinds of spices except caraway, cardamon, paprika and thyme by water extraction, those of 27 kinds except cardamon, cumin, paprika, tarragon and thyme by ethyl ether extraction, thou of 30 kinds except paprika and thyme by ethyl acetate extraction, and those of 28 kinds except cardamon, cumin, paprika and thyme by ethanol extraction showed strong antimicrobial activities against Leuconostoc mesenteroides.

• 대한한의학원전학회지
• /
• 제24권2호
• /
• pp.1-12
• /
• 2011

For the purpose of understanding Wang-bing's idea, which was influenced by Taoism and Hyeon-hak(玄學), I investigated the quotations of Taoism Books such as Jang-ja(莊子) in the Hwangje-Naegyeongsomunju(黃帝內經素問注), and came to the following conclusions. In the process of writing notes on the Hwangje-Naegyeongsomun, Wang-bing quoted Taoism Books such as Jang-Ja 10 times at 8 passeges which suggest the idea of Hyeon-hak. Through this annotating process, he suggested the vision of the Hyeon-hak idea which pursued the harmony of system and human nature. In the process of the annotating, he expressed the way of sage who practicing the caring of one's own health. And he emphasized on body and perfectly preserving of nature of oneself. Wang-bing especially emphsized on cultivating of one's mind while he insisting one's human nature. This means he pursued one's nature under the actual system, which was different from general Taoism. It was Hyeon-hak idea. So we can interpret Wang-bing as a sucessor of Hyeon-hak philosophers of Wi-Jin(魏晋) period.

• 소성∙가공
• /
• 제22권3호
• /
• pp.165-170
• /
• 2013

High temperature deformation behavior of a heat-resistant duplex stainless steel, used as a retort in the Pidgeon process for Mg production, was investigated in this study. 25Cr-8Ni based duplex stainless steels were cast into rectangular ingots, with dimensions of $350mm{\times}350mm{\times}100mm$. Nitrogen and yttrium were added at 0.3wt.% each to enhance the heat-resistance of the steel. Phase equilibrium was calculated using the thermodynamic software FactSage$^{(R)}$ and the database of FSStel. For comparison, cast 310S steel, a widely used heat-resistant austenitic stainless steel, was also examined in this study. Dilatometry was conducted on the as-cast ingots for the temperature range from RT to $1200^{\circ}C$ and the thermal expansion coefficients were evaluated. The nitrogen addition was found to have an effect on the thermal expansion behavior for temperatures between 800 and $1000^{\circ}C$. High temperature tensile and compression tests were conducted on the ingots for temperatures ranging from 900 to $1230^{\circ}C$, which is the operation temperature employed in Mg production by the Silico-thermic reduction process. The steel containing both N and Y showed much higher strength as compared to 310S.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1194-1199
• /
• 2010

Systematic finite element analyses on consolidation were performed with various drainage conditions. Numerical analyses were performed using SAGE CRISP2D, a commercial numerical analysis program for the conventional geotechnical engineering practice. For the input properties of the numerical analyses, incremental loading oedometer tests were performed on reconstituted kaolinite samples. Numerical analyses were performed with various drainage conditions such as vertical, radially inward and outward drainage conditions. For the case of radially inward drainage conditions, a series of numerical analyses were performed with varying the diameter of vertical drains. As a result, the lateral deformation and void ratio variation occurred during consolidation for the radially inward or outward drainage conditions. And the variations of the lateral deformation and void ratio did not fully disappear even after the completion of the consolidation and induced the spatial variations of the soil properties. Keywords : finite element analysis of consolidation, various drainage conditions, lateral deformation, spatial variation of soil properties.

• Journal of Radiation Protection and Research
• /
• 제29권1호
• /
• pp.41-48
• /
• 2004

A safety assessment code, called SAGE (Safety Assessment Groundwater Evaluation), has been developed to describe post-closure radionuclide releases and potential radiological doses for low- and intermediate-level radioactive waste (LILW) disposal in an engineered vault facility in Korea. The conceptual model implemented in the code is focused on the release of radionuclide from a gradually degrading engineered barrier system to an underlying unsaturated zone, thence to a saturated groundwater zone. The radionuclide transport equations are solved by spatially discretizing the disposal system into a series of compartments. Mass transfer between compartments is by diffusion/dispersion and advection. In all compartments, radionuclides ate decayed either as a single-member chain or as multi-member chains. The biosphere is represented as a set of steady-state, radionuclide-specific pathway dose conversion factors that are multiplied by the appropriate release rate from the far field for each pathway. The code has the capability to treat input parameters either deterministically or probabilistically. Parameter input is achieved through a user-friendly Graphical User Interface. An application is presented, which is compared against safety assessment results from the other computer codes, to benchmark the reliability of system-level conceptual modeling of the code.

• 대한전기학회논문지:전력기술부문A
• /
• 제51권4호
• /
• pp.169-174
• /
• 2002

The magnitude and phase of the compensating voltage in Dynamic Voltage Restorer (DVR) system depend on the voltage sag in the phases affected by the fault and on the influence of the zero sequence components. If the delta connection of the transformer is used, the zero sequence components do not appear on the load side. But nowadays, Y connected transformers with grounded neutral, that is 3-phase 4-wire system, are usually used. Therefore the zero-sequence components are occurred during faults. The zero-sequence components result in the high insulation costs and the asymmetry of the phase and magnitude of the terminal voltages. In this paper 3 phase 4 wire distribution system and 3 phase 3 wire system are analyzed and characteristics of voltage sag are presented. And this paper proposes the method that can mitigate the zero-sequence under the unbalance faults causing voltage sage and phase angle iumps.

• Biotechnology and Bioprocess Engineering:BBE
• /
• 제5권1호
• /
• pp.44-47
• /
• 2000

Cell growth and DNA synthesis were studied from a cultured early- and late- pas- sage mouse aorta smooth muscle cell (MASMC) because the proliferation of vascular smooth muscle cell (VSMC) is a key factor in development of atherosclerosis. In this study, the cells were cultured in fetal bovine serum (FBS) and stimulated by growth factors such as thrombin and platelet-derived growth factor-BB (PDGF-BB). Compared to the number of early-passage MASMC (passage 3 to 9) the number of late-passage MASMC (passage 30 to 40) in a normal serum state was increased 2 fold at Day 1, 3 and 6 in culture, respectively. Incorporation of $[^3H]$ thymidine into DNA induced by serum, PDGF and thrombin in late-passage MASMC was greater than those in early-passage MASMC. We also examined whether intracellular zinc levels would be an aging factor or not. The intracellular zinc level in early- and late-passage MASMC was monitored by using the zinc probe dye N-(6-methoxy-8-quinolyl)-p-toluenesulfonamide. It is interested that late-passage MASMC increased the intracellular fluorescence level of zinc, more than the early passage MASMC did. The alterations of intracellular zinc level occur concurrently with changes in MASMC proliferation rate during aging. This data suggest that the age-associated changes in zinc concentrations may provide a new in vitro model for the study of smooth muscle cell differentiation.

• Advances in Automotive Engineering
• /
• 제1권1호
• /
• pp.143-152
• /
• 2018

In this study an economical image stitching algorithm for use in automotive industry is developed for retrofittable panoramic image assistance applications. The aim of this project is to develop a driving assistance system known as Panoramic Parking Assistance (PPA) which is cheap, retrofittable and compatible for every type of automobiles. PPA generates bird's eye view image using cameras installed on the automobiles. Image stitching requires to get bird's eye view position of the vehicle. Panoramic images are wide area images that cannot be available by taking one shot, attained by stitching the overlapping areas. To achieve correct stitching many algorithms are used. This study includes some type of these algorithms and presents a simple one that is economical and practical. Firstly, the mathematical model of a wide view of angle camera is provided. Then distorted image correction is performed. Stitching is implemented by using the SIFT and SURF algorithms. It has been seen that using such algorithms requires complex image processing knowledge and implementation of high quality digital processors, which would be impracticle and costly for automobile use. Thus a simpler algorithm has been developed to decrase the complexity. The proposed algorithm uses one matching point for every couple of images and has ease of use and does not need high power processors. To show the efficiency, images coming from four distinct cameras are stitched by using the algorithm developed for the study and usability for automotive application is analyzed.