• Korean Journal of Microbiology
• /
• v.47 no.3
• /
• pp.241-248
• /
• 2011

The use of synthetic additives for preservation and enhancement of the market quality of food products has been emerging as a societal issue in terms of safety as well as changes in consumption patterns. Various research related to natural additives is being conducted to address these issues. This study examined the antibacterial effects of 79 types of medicinal herbs used as oriental remedies on bacteria isolated from beverages of damaged marketable quality. The antibacterial effects of methanol extracts on 13 Bacillus sp. and three Paenibacillus sp. were evaluated. We found that 43 of the herbal medicines analyzed had antibacterial effects on the isolated bacteria. Of those, eight were selected, and their antibacterial effects were further examined using water, ethanol, methanol, and ethyl acetate as solvents. The results revealed that Prunus mume, Rhus javanica, and Coptis japonica had excellent antibacterial effects against the isolated bacteria. In particular, they exerted greater antibacterial effects when water and ethanol were used as solvents. This result indicates the possibility of developing natural additives using these substances. Since P. mume in particular, has not been sufficiently studied compared to other herbal medicines, it presents an opportunity for additional investigation and the possibility for development as a new product in the future.

• Journal of Korea Technology Innovation Society
• /
• v.17 no.2
• /
• pp.421-447
• /
• 2014

Traditional medicine has been integrated into the national health system in many countries such as Korea, China, Taiwan, etc. Korea and China are most representative among them. The purpose of this study is to compare the policies on traditional medicine in Korea and China focusing on where it came from and where it is headed. In this regard, the study suggested the first analysis tool in the world for analyzing the policy of traditional medicine. The results of the study are as follows: First of all, the development process of Korean Medicine (KM) and Traditional Chinese Medicine (TCM) shows the same pattern, that is, both are influenced by its own national policies. Secondly, the difference between the two countries is due to the gap in the development status or the different aspects in national heath system. TCM is more vitalized in health system and has larger category, and stays ahead in globalization compared to KM. TCM covers Chinese medicine, integrative medicine and ethno-medicine. Korea emphasizes the role of KM in the declining birthrate and aging society, and promotes the overseas patient invitation strategy. China, on the other hand, establishes the medical system for emergency medical treatment and preventive treatment of major diseases and promotes overseas expansion of TCM service. In addition, Korea stressed the safety and distribution of herbal medicine, and China emphasizes production technologies. Korea has a strong medical device industry along with the government's fostering policy; however, in China, medical devices are in the R&D stage yet. Even though both countries promotes the drug development from natural products, Korea focuses on developing herbal cosmetics in application industry, but China shows weakness in policies on application industry. China shores up the foundation for culture and theory of traditional medicine, while Korea doesn't have related policy. Korea places emphasis on promoting collaboration with international organizations and medical volunteer programs, whereas China is more interested in mutual cooperation and real trade with other countries.

• The KIPS Transactions:PartA
• /
• v.16A no.6
• /
• pp.427-436
• /
• 2009

Digital virtual manufacturing is a technology that aims for the rapid development of products and the verification of production-process in ways that are more efficient by integrating digital models within the entire manufacturing process. These digital models utilize various information technologies, such as 3D CAD and simulations. Mixed reality, which represents graphical objects for only needed parts against real scene, can bring a more enriched sense of reality to an existing virtual manufacturing system that is in a pure virtual environment, and it can reduce the time and money needed for modeling the environment. This paper suggests a method for planning virtual factory layouts based on mixed reality using legacy datathat are already constructed in the real field. To do this, we developed the method to acquire simulation data from legacy data and process this acquired data for visualization based on mixed reality. And then we construct display system based on mixed reality, which can simulate virtual factory layout with processed data. Developed system can reduce errors related with factory layout by verifying the location and application of equipments in advance before arrangement of real ones at the practical job site.

• Korean Journal of Health Education and Promotion
• /
• v.7 no.1
• /
• pp.10-26
• /
• 1990

In Korean education, the health contents are scattered in various course subjects throughtout the primary and junior high school curriculum. So it is very difficult to provide systematic health education. The purpose of this study was to provide a guide for health education using health topic areas and major concepts that represent the scope of material that should be covered in health instruction. The steps used in selecting these health topic areas and major concepts were as follows: 1. A review of the literature related to health and health education was done to develop the rationale underlying this study. 2. Health topic areas basic to the growth and development characteristics of children, to human needs and to societal needs for healthful living were indentified. 3. The major concepts for each health topic area based on health sciences and children's growth and development levels were selected. 4. The major concepts selected were organized in sequence to guide health education from grade one to grade nine. The results of this study were as follows: 1. The identification of eleven health topic areas essential for health education. These include: personal habits and health healthy growth and development nutrition and health prevention of disease and disorders drugs and health mental health family life and health sex education accident prevention consumer health community health 2. The identification of the major concepts(generalizations) for each health topic area: 33 major concepts were identified as a guide in determining the health content of health education programs. These are 1) body cleaniness, 2) health of the sensory organs, 3) dental health, 4) exercise and rest, 5) growth and development, 6) body structure and function, 7) developmental tasks, 8) balanced nutrition, 9) eating habits, 10) food preparation and food storage, 11) sources of disease and disorders, 12) disease preventive behavior, 13) care during illness, 14) drug use and misuse, 15) drug addiction, 16) emotional responses, 17) human relationship, 18) self concept, 19) social adjustment, 20) health habits of the family, 21) interdependence of family members, 22) origin of life, 23) characteristics of man and woman, 24) sexual instinct, 25) safety behavior, 26) emergency measures, 27) criteria for selection of health products, 28) proper use of health information, 29) utilization of health and medical services, 30) environmental conservation, 31) environmental pollution, 32) population control, 33) function of public health services. 3. The organization of the concepts(generalizations) in sequence and for continuity in health instruction at the primary and junior high school level.

• Journal of Korean Medicine Rehabilitation
• /
• v.25 no.3
• /
• pp.1-9
• /
• 2015

Objectives To evaluate Shinbaro Pharmacopuncture safety through analysis of potential single-dose intramuscular toxicity of Sinbaro Pharmacopucture in SD rats and Beagle dogs. Methods Single-dose intramuscular toxicity of Shinbaro Pharmacopuncture was assessed in accordance with Korea Food and Drug Administration Guidelines for toxicity testing of Medicinal Products. The SD rats were treated intramuscularly with Shinbaro Pharmacopuncture at doses of 0, 4.6, 9.2, and 18.5 mg/kg, respectively. The Beagle dogs were treated intramuscularly with Shinbaro Pharmacopuncture at doses of 2.3, and 4.6 mg/kg, respectively, and after 3 days, the procedure was repeated a second time at doses of 0.6, and 1.2 mg/kg, respectively, for toxicity testing. Mortality, change in body weight, and necropsy findings were examined for the study period. Results There were no mortalities, general symptoms, or body weight changes in the SD rats. While pyelectasis of the left kidney was observed in a male rat in the 4.6 mg/kg administration group, natural occurrence is common, and does not appear to be related with the test substance. No mortalities were observed in the Beagle dogs. In assessment of general symptoms, a female dog in the 9.2 mg/kg group displayed body weight decrease due to leftover food, but the change in body weight was within the normal range seen at 6~7 months, and the necropsy findings were not significant. The toxicity of the test substance appears to be minimal. Conclusions The results suggest that the lethal dose 50 ($LD_{50}$) and approximate lethaldose (ALD) value in single intramuscular administration of Shinbaro Pharmacopuncture in SD rats and Beagle dogs are higher than 18.5 mg/kg.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

• Knowledge Management Research
• /
• v.21 no.3
• /
• pp.229-247
• /
• 2020

In the remarkable growth of P2P financial platform in the field of knowledge management, only companies with big data and machine learning technologies are surviving in fierce competition. The ability to analyze borrowers' credit is most important, and platform companies are also recognizing this capability as the most important business asset, so they are building a credit evaluation system based on artificial intelligence. Nonetheless, online P2P platform providers that offer related services only act as intermediaries to apply for investors and borrowers, and all the risks associated with the investments are attributable to investors. For investors, the only way to verify the safety of investment products depends on the reputation of P2P companies from newspaper and online website. Time series information such as delinquency rate is not enough to evaluate the early stage of Korean P2P makers' credit analysis capability. This study examines the credit analysis procedure of P2P loan platform using artificial intelligence through the case analysis method for well known the top three companies that are focusing on the credit lending market and the kinds of information data to use. Through this, we will improve the understanding of credit analysis techniques through artificial intelligence, and try to examine limitations of credit analysis methods through artificial intelligence.

• Korean Journal of Food Science and Technology
• /
• v.35 no.6
• /
• pp.1155-1161
• /
• 2003

A three-year (2000-2002) survey on consumer's awareness and perception of genetically-modified (GM) foods was conducted on random samples of Korean consumers. More than 65% of the respondents were exposed to some information related to GM foods. The greatest benefit of the development of GM foods was thought to be their remedy of potential food shortages in the future. More than 90% of Korean consumers wanted GM foods to be labeled. About 18% of the respondents would buy GM foods voluntarily, whereas over 46% would not until they knew more about the product. Only 39% of Korean consumers were found to have realized that food items origination from plants contained genes. More consumers responded that they would not buy herbicide-resistant GM soybean and buy vitamin-enriched GM soybean instead. Many Korean consumers appeared to make decisions of acceptance or rejection of GM foods not on the basis of biotechnology, but on the basis of the word(s) used to describe the products, such as herbicide and vitamin. Only 4% of Korean consumers responded that GM foods were the greatest threat to the safety of Korean foods.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.06a
• /
• pp.84-85
• /
• 2009

New approaches for detecting, preventing and remedying environmental damage are important for protection of the environment. Procedures must be developed and implemented to reduce the amount of waste produced in chemical processes, to detect the presence and/or concentration of contaminants and decontaminate fouled environments. Contamination can be classified into three general types: airborne, surface and structural. The most dangerous type is airborne contamination, because of the opportunity for inhalation and ingestion. The second most dangerous type is surface contamination. Surface contamination can be transferred to workers by casual contact and if disturbed can easily be made airborne. The decontamination of the surface in the nuclear facilities has been widely studied with particular emphasis on small and large surfaces. The amount of wastes being produced during decommissioning of nuclear facilities is much higher than the total wastes cumulated during operation. And, the process of decommissioning has a strong possibility of personal's exposure and emission to environment of the radioactive contaminants, requiring through monitoring and estimation of radiation and radioactivity. So, it is important to monitor the radioactive contamination level of the nuclear facilities for the determination of the decontamination method, the establishment of the decommissioning planning, and the worker's safety. But it is very difficult to measure the surface contamination of the floor and wall in the highly contaminated facilities. In this study, the poly(styrene-ethyl acrylate) [poly(St-EA)] core-shell composite polymer for measurement of the radioactive contamination was synthesized by the method of emulsion polymerization. The morphology of the poly(St-EA) composite emulsion particle was core-shell structure, with polystyrene (PS)as the core and poly(ethyl acrylate) (PEA) as the shell. Core-shell polymers of styrene (St)/ethyl acrylate (EA) pair were prepared by sequential emulsion polymerization in the presence of sodium dodecyl sulfate (SOS) as an emulsifier using ammonium persulfate (APS) as an initiator. The polymer was made by impregnating organic scintillators, 2,5-diphenyloxazole (PPO) and 1,4-bis[5-phenyl-2-oxazol]benzene (POPOP). Related tests and analysis confirmed the success in synthesis of composite polymer. The products are characterized by IT-IR spectroscopy, TGA that were used, respectively, to show the structure, the thermal stability of the prepared polymer. Two-phase particles with a core-shell structure were obtained in experiments where the estimated glass transition temperature and the morphologies of emulsion particles. Radiation pollution level the detection about under using examined the beta rays. The morphology of the poly(St-EA) composite polymer synthesized by the method of emulsion polymerization was a core-shell structure, as shown in Fig. 1. Core-shell materials consist of a core structural domain covered by a shell domain. Clearly, the entire surface of PS core was covered by PEA. The inner region was a PS core and the outer region was a PEA shell. The particle size distribution showed similar in the range 350-360 nm.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.133-142
• /
• 2014

Recently, more focus is shift to imbalances in aggregate market supply and demand and an exhaustion of natural resources. In this situation, Electric arc furnace oxidizing slag (EAF Slag) has high application possibility as aggregate for concrete due to similar property with general aggregate. In this study, We've got the plan to assure the chemical stability of EAF Slag, and then experimentally tested the mechanical performance and durability for the fine aggregate used EAF Slag. On this test result, we suggest the application plan. At the result of this study, it shows that EAF slag would reduce the surface defect such as pop-out due to natural aging for the fixed hour and adjustment the grain size of EAF Slag. And mechanical performance and durability according to the replacement rate of concrete service, were revealed more than equal or equal compare to general aggregate. Hereafter, quality control must precede not to impede the beauty of concrete surface as assure the safety for aging and processing. And, to establish the environmental resource recycling system for by-products of steel, it should be made development of various application and guideline of quality control for the EAF slag aggregate. Moreover, it must be constantly studied all kind of engineering performance and durability for related to this study.