• Journal of the Korean Society of Safety
• /
• v.18 no.4
• /
• pp.148-154
• /
• 2003

There are now the plating process that have many hazardous factor cause of the using numerous noxious chemical and bad working environments. The purpose of the study is to make a selection of suitable safety evaluation method that can analyze and righteously find with numerous hazardous factor of the plating process. And another purpose is to systematically adjust the risk of plating process by comprehension of the role of process, equipment, and source material. Therefore, these studies are carried out in the following three investigations of this report. The first research understands the injurious human health and environment by analyzing hazardous material based on the MSDS. To evaluate the safety of process and compartment, the second research is proposed the security secure counterproposal by using the FMEA and the HAZOP. The final research is devoted to systematically analyze the hazard by applying for reasonable guide word and doing the HAZOP for hazardous factor in specific process.

• Proceedings of the Safety Management and Science Conference
• /
• 2013.11a
• /
• pp.275-290
• /
• 2013

The main cause of building fire fatalities occur in the combustible material heat, smoke and toxic gases are. Building interior decoration, etc., especially as much of the harmful substances generated during combustion, and, used in domestic architecture wallpaper, ceiling, and other plastics, built-in foam insulation also analyzed recognition of fire hazards approach to test the conkalrorimiteo test, choedaeyeolbangchulryul through, chongbal heat, mass loss rate, generates carbon monoxide gas hazard ratio tests, analysis and evaluation rigid foam index testing the toxicity of hazardous material generated by performing a gas clean up and assess the material test results, the minimum order to provide data to quantify the risk of fire. Ensure fire safety of building materials, composite materials in order to test the various risk factors could be considered organic to the introduction of testing and evaluation is needed urgently.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.126-135
• /
• 2016

The purpose of this study is to develop risk assessment techniques and institutional analysis of domestic and international, the management techniques that can efficiently manage the harmful factor of the laboratory and to present the institutional measures that can be efficiently implemented. Due to a variety of adverse factors of laboratory, accidents of laboratory of various forms have occurred, but there is no risk assessment system in order to manage this effectively. So, we investigated this domestic existing risk assessment methods and the outside of the risk assessment system, and also analyzed accidents of domestic laboratory that occurred in 2014. In addition, we targeted the 24 laboratories in 21 universities to investigate the management of harmful factors of the laboratory and performed applying test for 12 domestic laboratories. Existing risk evaluation system, such as PMS, SMS, off-site impact assessment, since the industrial site is the subject, is a difficult problem to be directly applied to the laboratory of the research institute. So, we implemented management status and harmful factors survey and classified the research and development activities based on this data. Finally we developed "pre-hazards risk analysis method" to create each of the safety management measures. In addition, research activities personnel conducted voluntarily risk assessment, which is shared by institutions and government. It is presented the institutional system for safety management of laboratory. Its result, pre-hazards risk analysis method and institutionalization scheme will be able to achieve laboratory accident prevention system.

• Journal of the Korean Society of Safety
• /
• v.31 no.4
• /
• pp.156-163
• /
• 2016

There exists required safety integrity level (SIL) to assure safety in accordance with international standards for every electrical / electronics / control equipment or systems with safety related functions. The SIL is allocated from lowest level (level 0) to highest level (level 4). In order to guarantee certain safety level that is internationally acceptable, application of methodology for SIL allocation and demonstration based on related international standards is required. However, the theoretical and practical study for safety integrity level is barely under way in the domestic railway industry. This research studied not only the global process of SIL allocation to guarantee safety in accordance with international standards for safety related equipment and system, but the quantitative methodology based on international standard and the semi-quantitative methodology as alternative way for SIL allocation. Specifically, the systematic SIL allocation for platform screen door system of railway is studied applying the semi-quantitative methodology in order to save much time and effort compared to quantitative method.

• Journal of Radiation Industry
• /
• v.9 no.2
• /
• pp.103-109
• /
• 2015

More recently, companies that have obtained permission to use radioactive materials or radiation device and registered radiation workers have increased by 10% and 4% respectively. The increased use of radiation could have an effect on radiation safety control. However, there is not nearly enough manpower and budget compared to the number of workers and facilities. This paper will suggest a counteroffer thought analyzing pending issues. The results of this paper indicate that there are 47 and 31.3 workers per radiation protection officer in educational and research institutes, respectively. There are 20.1 persons per RPO in hospitals, even though there are 2 RPOs appointed. Those with a special license as a radioisotope handler were ruled out as possible managers because medical doctors who have a special license for radioisotope handling normally have no experience with radiation safety. The number of staff members and budget have been insufficient for safety control at most educational and research institutes. It is necessary to build an optimized safety control system for effective Radiation Safety Control. This will reduce the risk factor of safety, and a few RPOs can be supplied for efficiency and convenience.

• Journal of the Korean Society of Safety
• /
• v.20 no.1 s.69
• /
• pp.119-125
• /
• 2005

Construction work accidents have not decreased in spite of much effect such as new work methods education and research related to the safety management. Specially, many fatal accidents were mainly caused by unanticipated risk factors in reinforced concrete construction work, which was involved in apartment, building. school church, hotel hospital, bank work and the other works. According to the construction fatal accident book by KOSHA 1,903 workers were killed by the fatal accidents in reinforced concrete construction work during the 13 years$(1992\~2004)$. From these reasons, this study researched the cause of fatal accidents which were happened in reinforced concrete construction work during last 13 years and surveyed construction managers and specialists about risk factors according to the work type in the reinforced concrete construction work. Therefore, this study will suggest the counterplan about the construction safety management and prevent fatal accidents from construction site related to the reinforced concrete construction work.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.18 no.5
• /
• pp.431-438
• /
• 2012

The representative risk evaluation techniques of the marine traffic environment are the FSA, PAWSA, & IWRAP. For the development of these techniques, the risk factors suitable to the marine traffic environment should be selected & the assessment criterion of the risk factors should be provided. The risk factors were selected as the factors that relate both to the frequency of casualty & to the consequence of casualty because the risk was defined as the frequency of casualty times the consequence of that casualty on the existing techniques. But, the risk factors relate to the consequence of casualty are excluded because the risk is defined as the sum of the risk factors including the frequency and the consequence by factors on this study. The 20 kinds of risk factors to compose the risk are selected and classified into 5 categories according to similar nature through the analysis of preceding study on the classification of the risk factors. Finally, as the foundation of risk assessment model's development for domestic marine traffic environment, the practical assessment criterion of the risk factors are suggested.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.19 no.4
• /
• pp.375-381
• /
• 2013

To assess the risk of marine traffic environments, with high confidential level, the risk factors comprising it should be identified and the risk acceptance criteria should be also provided. Furthermore, the relative importance of each risk factor(the weight of each risk factor on total risk) should be analyzed because the risk is expressed as the sum of risk factors comprising it. The twenty kinds of risk factors and its assessment criteria were suggested for the domestic marine traffic environments by an examination of the existing risk assessment models on the previous studies. The relative importance of each risk factor was also analyzed through the questionnaire using analytic hierarchy process by the marine traffic experts on the same studies. Based on these previous studies, the risk was evaluated at the port of Mokpo and its approaches on this study. The port of Mokpo and its approaches were divided into four sectors for the comparative evaluation, the result of the comparative evaluation on four sectors showed that the risk of the Jeongdeung-hae passage is the highest due to higher risk level of some risk factors(water movements, complexities, tug boats, pilotage, VTS) than the other sectors. The result of this evaluation is in accord with the analysis results of the other studies using various qualitative or quantitative risk analysis methods at the same sea areas.

• Journal of the Korean Society of Safety
• /
• v.12 no.4
• /
• pp.153-160
• /
• 1997

The purpose of this paper is to present design recommendations intended to reduce the risk of cumulative trauma disorders(CTD) at the Osram Slvania, Inc. The CTD risk index score is a method which quantifies the risk factors to CTD incidence, namely extreme postures, high force elements, frequent damaging hand motions, and other miscellaneous factors. The risk index score quantified the jobs as a single composite value by weighting the scores for each risk factor. Jobs were prioritized for capital outlays in workstation redesign, and the factors of highest risk within each job could be identified. Three jobs which presented the greatest risk of CTD incidence were redesigned ergonomically.

• Safety and Health at Work
• /
• v.10 no.4
• /
• pp.428-436
• /
• 2019

Background: Metalworking fluids (MWFs) are mixtures with inhalation exposures as mists, dusts, and vapors, and dermal exposure in the dispersed and bulk liquid phase. A quantitative risk assessment was performed for exposure to MWF and respiratory disease. Methods: Risks associated with MWF were derived from published studies and NIOSH Health Hazard Evaluations, and lifetime risks were calculated. The outcomes analyzed included adult onset asthma, hypersensitivity pneumonitis, pulmonary function impairment, and reported symptoms. Incidence rates were compiled or estimated, and annual proportional loss of respiratory capacity was derived from cross-sectional assessments. Results: A strong healthy worker survivor effect was present. New-onset asthma and hypersensitivity pneumonitis, at 0.1 mg/㎥ MWF under continuous outbreak conditions, had a lifetime risk of 45%; if the associated microbiological conditions occur with only 5% prevalence, then the lifetime risk would be about 3%. At 0.1 mg/㎥, the estimate of excess lifetime risk of attributable pulmonary impairment was 0.25%, which may have been underestimated by a factor of 5 or more by a strong healthy worker survivor effect. The symptom prevalence associated with respiratory impairment at 0.1 mg/㎥ MWF was estimated to be 5% (published studies) and 21% (Health Hazard Evaluations). Conclusion: Significant risks of impairment and chronic disease occurred at 0.1 mg/㎥ for MWFs in use mostly before 2000. Evolving MWFs contain new ingredients with uncharacterized long-term hazards.