• The KSFM Journal of Fluid Machinery
• /
• v.10 no.5
• /
• pp.20-26
• /
• 2007

Some gate valves are susceptible to pressure locking and thermal binding which prevent the safety function. The safety related gate valves susceptible to pressure locking and thermal binding shall be identified and taken preventive actions to ensure the safety function. The identification of the gate valves susceptible to pressure locking and thermal binding needs the evaluation of system design, valve and piping arrangement, test requirements, and operating conditions. Application of preventive methods should consider the system safety function, applicability, effectiveness, interface with system design, and cost. The selection procedure of valves susceptible to pressure locking and thermal binding can be effectively used in industry including nuclear power plants. In order to prevent the pressure locking, the hole can be drilled through the one disc of upstream side or down stream and the external equalizing line can be installed from bonnet to downstream or upstream. The double disc parallel seat valve type can be used instead of flexible wedge gate valve to prevent the thermal binding. The identification of gate valves susceptible to pressure locking and thermal binding, and preventive actions will meet the regulatory requirements and enhance the availability and safety of plants.

• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.250-257
• /
• 2004

Typical railway systems are composed of the various sub-systems, such as tracks, structures, electricity supplying systems, signal systems and vehicles. The roles of the sub-systems are clarified in the railway regulations in terms of their whole life cycle, as like design, operation and disposal stages. The regulations express clearly the basic specifications and requirements that need to accomplish their own performance and also state the standards and procedures for the normal operations and emergency conditions. In this paper the current railway regulation systems are analyzed and average revision periods are presented as the results of the analysis on revision history of railway safety regulations. This paper also presents the requirements for national safety standards based on Railway Safety Act and the necessity of application of system computer aided system engineering (CASE) tool for the improvement of legislation tasks. By exemplifying the cases of high speed rail system and Japanese cases that had developed softwares for supporing regulation revision management, the methodologies was studied for reconstruction of railway safety regulation system. As the results, it was presented such as the considerations for actual implementation and systematic safety regulation revision.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.786-790
• /
• 2006

Urban rail transit offers target performance and function because various lower part system such as rolling-stock, signal, power and trackis consisted as complex. In order to function properly an urban rail transit which is complicated system to work as safety and reliability, System must secure safety with structure, design, manufacture, install and verification and it is important to establish a safety standard follows it procedures, establish what step all it is important to operate. Safety standard of urban transit infrastructure is minimum standard necessary to secure safety of signal, power and track. Urban rail transit standard business leads to make many requirements. Recently, many types of equipment have applied to manage requirements and standards for system efficiently in part of universal, airline and car accordingly applied equipments use to manage a pursuit(Trace) between standard of system. Especially importance of management is emphasized more become more. Importance of standard management which usesa computing support tool recently in transit filed is embossed and is predicted to be more such forward. Therefore we propose the effective method of management with infrastructure system by constructed data-base system.

• Journal of the Korea Safety Management & Science
• /
• v.24 no.3
• /
• pp.29-37
• /
• 2022

The development of technology related to the Fourth Industrial Revolution and the growth of the online market due to pandemic are continuing the growth of the logistics market for product delivery. If it is difficult to deliver the product directly to the customer during delivery, storage and delivery using the unmanned courier box are being carried out. However, existing storage boxes are not actively used due to lack of usability even though they have the advantage of storing goods and delivering non-face-to-face. In addition, existing courier boxes are not prepared for cold chain transportation. The unmanned delivery storage device with ICT cold chain technology should be developed to prepare for the transition to non-face-to-face society, to improve logistics efficiency and meet user's requirements. Also, it is necessary to consider the measures to reduce the safety problems that may occur during the use and maintenance of the automatic system. This study conducted a model-based analysis for the development of unmanned delivery storage devices with ICT cold chain technology, and conducted a study to derive the system development specifications that meet the requirements and secure safety and apply them to the development process.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.30 no.4
• /
• pp.380-385
• /
• 2010

The integrity of components and piping of operating nuclear power plants has been identified by in-service inspection(ISI) requirements and activities commensurate with standards and codes such as KEPIC MI or ASME Code Section XI. However, the other various degradation mechanisms not considered during design stage of nuclear power plants have been checked by enhanced ISI. The requirements of enhanced ISI have been voluntarily developed by the industry itself or strickly issued by regulatory body. Even though the requirements were developed by the industry, they should be reviewed by regulatory body for their application in nuclear power plants. The enhanced ISI activities and requirements of non-destructive examination(NDE) which reflect the degradation issues in nuclear power industry will be primarily discussed in this paper.

• Journal of the Korea Safety Management & Science
• /
• v.13 no.4
• /
• pp.161-169
• /
• 2011

International Organization for Standardization has recently published ISO 9001:2008 which is the basic requirements for a quality management system that an organization must fulfil to demonstrate its ability to consistently provide products that enhance customer satisfaction and meet applicable statutory and regulatory requirements. Not many empirical researches based on ISO 9001:2008 have been done up until now. In this article we outline transitional features for ISO 9000 quality management system (QMS) since its first publication in 1987. In order to effectively maintain ISO 9001:2008 QMS certification and continuously enhance quality management activities, we perform statistical analysis for the minor nonconformity data generated from follow-up audits for subcontractors of shipbuilding industry based on ISO 9001:2008 requirements. A Kruskal-Wallis test is used to show relationships between the minor nonconformity data and three classification criteria: the type of business, the size of business, and the number of follow-up audits.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.4
• /
• pp.59-67
• /
• 2008

In the next near future, the human would like to use the small unmanned ground vehicle(SUGV) on the diverse fields. Specially the world of today is tried to apply with operating the task on very difficult working environments such as some dangerous or unreachable area. To work this task, this vehicle should be guaranteed with the high level of reliability, safety, and performance. In this paper, we propose to focus on not only the functional requirements, but also the non-functional requirements based on software architecture at the design stage for developing the embedded system. Through focusing on the non-functional requirements on this software architecture, we can obtain the design goal of the target system and also show the enhancement of reliability, safety and performance with 'Vtune' performance analysis tool.

• Journal of the Korea Safety Management & Science
• /
• v.7 no.4
• /
• pp.49-59
• /
• 2005

This paper is to propose various safety design models of tolerance specifications with different consumer requirements. In these models, tolerance specifications can be jointly determined by considering all the stochastic, economic, robust and engineering safety design factors with various characteristics of interest. In this paper, the proposed models are easily formulated for design engineers.

• Journal of Applied Reliability
• /
• v.9 no.3
• /
• pp.165-176
• /
• 2009

The risk management case is an organization's formal arrangement to ensure the safety of its work activity within risk management system. It allows an organization to demonstrate its capability in achieving its safety objectives and in meeting regulatory requirements. This paper presents how the safety assessments are described, prepared and maintained to meet the criteria specified by the upcoming safety regulations. We propose the elements of risk management system that include arrangements for the ongoing identification of hazards, assessment of risks and the implementation of necessary control measures.

• Journal of the Korean Society for Railway
• /
• v.7 no.3
• /
• pp.251-258
• /
• 2004

A systematic methodology to determine safety requirements for railway signalling system and safety requirement allocation into system are presented. THR concept is used for as an interface between Risk Analysis to be performed by railway operator and System Design Analysis by the supplier. This approach is based on Signalling Safety Standard EN50129 by CENELEC.