• 한국가스학회지
• /
• 제3권1호
• /
• pp.58-63
• /
• 1999

가정용 LPG 저압조정기의 사용경과에 따른 성능특성과 사용수명을 평가하기 위하여 실험적 연구를 수행하였다. 실험결과에 의하면 조정기의 안전장치 작동압력은 사용경과 1년부터 분출개시압력값과 정지압력값을 이탈하였고, 조정압력과 폐쇄압력은 사용경과 7${\~}$8년부터의 조정기에서 기준값을 현저하게 벗어났다. 스프링과 다이어프램은 사용한지 5${\~}$6년이 경과하면서 재료특성이 저하하였다. 따라서 LPG 저압조정기는 약 6년 정도의 사용수명을 갖고 있는 것으로 평가된다. 그러나 사용자의 안전확보와 사고예방을 위해서 5년이 경과하면 조정기에 이상이 없더라도 교체하는 것이 바람직하다.

• 소성∙가공
• /
• 제24권4호
• /
• pp.293-298
• /
• 2015

A safety vent is crucial to protect its user from unpredictable explosions caused by increasing internal pressure of the lithium-ion batteries. In order to prevent the explosion of the battery, a safety vent rupture is required when the internal pressure reaches a critical value. In conventional manufacturing, the cap plate and the safety vent are fabricated separately and subsequently welded to each other. In the current study, a manufacturing process including a backward extrusion and coining process is suggested to produce an integral safety vent which also has the benefit of increasing production efficiency. FE simulations were conducted to predict the rupture pressure and to design the safety vent using a ductile fracture criterion and the element deletion method. The critical value, C, in the ductile fracture criterion was obtained from uniaxial tensile tests with an annealed sheet of 1050-H14 aluminum alloy. Rupture tests were preformed to measure the rupture pressure of the safety vent. The results met the required rupture pressure within 8.5±0.5 kgf/cm². The simulation results were compared with experimental results, which showed that the predicted rupture pressures are in good agreement with experimentally measured ones with a maximum error of only 3.9%.

• 한국기계가공학회지
• /
• 제17권6호
• /
• pp.151-157
• /
• 2018

In this study, we have developed a composite pressure vessel that is compact and can store refrigerant at high pressure to increase the refrigerant volume. The composite pressure vessel is made of aluminum-based duralumin, which has high rigidity and excellent elongation in the inner liner, considering the characteristics of products in the aerospace and defense industry, where the safety of the applied product is considered as a priority. High strength carbon fiber was applied to the outside. In order to evaluate the performance of the developed product, burst test and cycling test were carried out. In burst test, an excellent safety margin equivalent to 2.7 times the operating pressure was obtained. In cycling test, a stable failure mode in which 'pre-burst leak' occurs is proved and the soundness of the product is proved.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.8-13
• /
• 2010

Many vehicles have significantly under-inflated tires, primarily because drivers infrequently check their vehicles' tire pressure. When a tire is used while significantly under-inflated, its sidewalls flex more and the tire temperature increases, increasing stress and the risk of failure. In this study we evaluated tire safety and economical efficiency at various inflation pressure. For tire safety we performed FMVSS indoor durability test, measurement of rolling tire temperature, braking performance at dry/wet road condition, and rolling resistance test for economical efficiency. Results show that low pressure decreases tire durability of both speed-increase condition and load-increase condition. Heat temperature of rolling tire increases as pressure decreases and significantly under-inflated tires cause increase of vehicle's stopping distance at wet road condition. Also Under-inflation increases the rolling resistance of a tire and, correspondingly, decreases vehicle's fuel economy.

• 한국유체기계학회 논문집
• /
• 제17권1호
• /
• pp.5-11
• /
• 2014

The purpose of this paper is to investigate an analytical approach for opening performance evaluation of the nuclear pressure safety valve based on standard codes such as ASME or KEPIC. It is well-known that safety valve is considered as one of pressure relief valves for protecting a boiler or pressure vessel from exceeding the maximum allowable working pressure. When pressure in a container reaches its set pressure, the safety valve commences discharging the internal fluid by a sudden opening called as popping. Safety valve is usually evaluated by set pressure, full open, blow-down, leakage and flow capacity. The test procedure and technical requirement for performance evaluation is described in international code of ASME code such as BPVC. The opening characteristics of steam safety valve can be analyzed by computational fluid dynamics (CFD) and steam shaft dynamics. First, the flow analysis along opening process is simulated by running the CFD models of the ten types of opening steps from 0 to 100%. As a analysis result, the various CFD outputs of flow pattern, pressure, forces on the disc and mass flow at each simulation step is demonstrated. The lift force is calculated by using the forces applied on disc from static pressure and secondary flow. And, the effect of huddle chamber or control chamber is studied by dynamic analysis based on CFD simulation results such as lift force. As a result, dynamics analysis shows opening features according to the sizes of control chamber.

• 한국유체기계학회 논문집
• /
• 제19권3호
• /
• pp.53-56
• /
• 2016

In this study, experiments and finite element method analysis were used to determine the autofrettage pressure that is optimal and then maximizes the cycling life of Type3 composite cylinders used in self-contained breathing apparatus. For both approaches, the cylinders were pressurized at 100, 110, ${\ldots}$, 290 % of the test pressure, respectively. The stresses were computed by the FEM analysis; while the strains of cylinders were recorded and the failure modes were monitored during the cycling test. As a result, from the good agreements between the simulations and experiments, it was concluded that at least 70 % of the test pressure should be applied as the autofrettage pressure in order to takes visible effect on the cycling life, and 160 % of the test pressure induces the maximum cycling life and the desired failure mode.

• 한국산업보건학회지
• /
• 제17권2호
• /
• pp.131-143
• /
• 2007

The purpose of this study was to compare the ground reaction forces and plantar pressure variables among three different safety shoes (Type 1: ergonomically designed and high quality shoes, 2: curved and cushioned safety hoes, and 3: regular safety shoes) and to find the effect of insole during walking. Ten healthy subjects were recruited for this study. The ground reaction force was measured using a 3 dimensional motion analysis system. Plantar pressures were measured Pedar Mobile foot pressure scan system. The ground reaction force variables were not significantly different among three different shoe types and insole conditions. After insertion insole, plantar pressure distributions were improved. These results suggest that the type 1 safety shoes was superior than other safety shoes in the statistics, and applying insole could be a possible method to prevent fatigue of lower extremity and musculoskeletal disorders. Further studies are needed to find the effect of ergonomically designed safety shoes design and insole on practical value prevention of musculoskeletal disorder, fatigue and satisfaction of workers.

• 한국가스학회지
• /
• 제12권2호
• /
• pp.105-109
• /
• 2008

안전밸브는 정압기지 내에 정압기의 파괴 또는 관 내 수분의 응축 등으로 인한 관내 압력의 비정상적인 증가를 자동적으로 완화시켜주는 메커니즘을 가지고 있는 밸브이다. 따라서 정압기지의 안전을 위해서 안전밸브의 유동 특성과 유동 형태를 살펴보는 것은 매우 중요하다. 본 논문은 안전밸브의 분출용량과 필요분출면적에 따른 유동 특성을 수치해석을 통해서 분석하였다. 본 결과를 국내 외 안전밸브 관련 규정인 미국의 API(America Petroleum Institute), 유럽 연합의 EN(European Standard), 프랑스의 NF(Norme Francise)를 이용하여 분석, 비교하였다. 또한 안전밸브의 최대 필요 분출 면적을 이용하여 국내 및 국외 규정을 각각 적용하였을 때의 안전밸브의 필요 설치 수량에 대한 고찰을 해보았다.

• 한국가스학회지
• /
• 제19권6호
• /
• pp.85-91
• /
• 2015

전 세계적으로 수소에너지에 대한 관심이 점차 증가함에 따라 수소 생산, 저장, 운송, 이용 분야에서 응용 기술의 개발이 활발히 진행되고 있다. 국내에서도 울산 수소타운을 조성하여 시범운영 중에 있어 수소에너지 응용처 확대에 대한 가능성을 높이고 있다. 울산 수소타운은 가스 사용 압력에 따라 고압부와 저압부로 구분할 수 있는데 고압부는 '고압가스안전관리법'을 적용하여 안전관리를 하고 있고 저압부는 '수소타운 시범사업의 안전관리에 관한 지침'을 적용하여 운영 중에 있다. 본 논문에서는 울산 수소타운 내 0.1MPa 이하 저압 수소 사용시설의 안전관리 효율성 향상을 위해 저압 수소사용 시설 및 안전관리 항목 분석을 통해 안전관리 방향성을 검토하고 향후 개선 방향을 제시하고자 하였다. 본 연구의 결과를 통해 국내 수소타운 활성화 및 안전 관리 효율성 증대에 도움이 될 수 있을 것으로 기대한다.

• 한국유체기계학회 논문집
• /
• 제17권6호
• /
• pp.104-108
• /
• 2014

The recent Fukushima nuclear power plant accidents shows that the core make up at high RCS pressure condition is very important to prevent core melting. The core make up flow at high pressure condition should be driven by gravity force or passive forces because the AC-powered safety features are not available during a Station Black Out (SBO) accident. The reactor Coolant System (RCS) mass inventory is continuously decreased by releasing steam through the pressurizer safety valves after reactor trip during a SBO accident. The core will be melted down within 2~3 hours without core make up action by active or passive mode. In the new design concept of a Hybrid Safety Injection Tank (Hybrid SIT) both for low and high RCS pressure conditions, the low pressure nitrogen gas serves as a charging pressure for a LBLOCA injection mode, while the PZR high pressure steam provides an equalizing pressure for a high pressure injection mode such as a SBO accident. After the pressure equalizing process by battery driven initiation valve at a high pressure SBO condition, the Hybrid SIT injection water will be passively injected into the reactor downcomer by gravity head. The SBO simulation by MARS code show that the core makeup injection flow through the Hybrid SIT continued up to the SIT empty condition, and the core heatup is delayed as much.