• International Journal of Aerospace System Engineering
• /
• 제2권1호
• /
• pp.31-37
• /
• 2015

Passenger plane flying motion graphics is very important for route, control of the flight altitude and passenger safety. For all that, it is quite useful for route away from the disruptive influences such as vibrations caused by storms or turbulence during the flight and in processes such as re-arrest of the specified route. Therefore, the response time against the adverse effects of the shape and the system is so necessary for both safety and comfort. In this study motion and route graphics were obtained under the control of an airliner C # interface with the program. In this way, graphics were obtained in solving the equations of motion in short time and design time was shortened.

• 제어로봇시스템학회논문지
• /
• 제14권7호
• /
• pp.711-719
• /
• 2008

Although non-real time simulation and pilot based evaluations are available for the development of flight control computer prior to real flight tests, there are still many risky factors. The control law designed for prototype aircraft often leads to degraded performance from the initial design objectives, therefore, the proper evaluation methods should be applied such that flight control law designed can be verified in real flight environment. The one proposed in this paper is IFS(In-Flight Simulator). Currently, this system has been implemented into the F-18 HARV(High Angle of Attack Research Vehicle), SU-27 and F-16 VISTA(Variable stability. In flight Simulation Test Aircraft) programs. This paper addresses the concept of switching mechanism for FLCC(Flight Control Computer)-SWMC(Switching Mechanism Computer) using 1553B communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed to reduce abrupt transient and minimize the integrator effect in pitch axis control law. It hans been turned out from the pilot evaluation in real time that the aircraft is controllable during the inter-conversion process through the flight control computer, and level 1 handling qualities are guaranteed. In addition, flight safety is maintained with an acceptable transient response during aggressive maneuver performed in severe flight conditions.

• 한국항공운항학회지
• /
• 제9권2호
• /
• pp.63-76
• /
• 2001

The number of civil aviation aircraft registered in Korea has continuously increased. Accordingly the accidents accompanying loss of human or economic resources occurred repeatedly. But the analysis of flight data recorded in FDR was not done by ourselves in the accident investigation because of lack of analysis technology. Therefore, this study is performed to secure the safety of civil aviation by establishing systematic analysis ability of Flight Data Recorder. Through this study, download flight data to personal computer, editing interface file to convert from binary data to engineering data, three dimensional graphical analysis and numerical analysis are performed. For the analysis, the flight of B747-400 model aircraft between Narita(Japan) and Gimpo(Korea) was selected.

• 한국항공운항학회지
• /
• 제28권1호
• /
• pp.122-129
• /
• 2020

Korea's HEMS are mainly operated during the week, but they are pushing for 24-hour operations. This study has made an overall comparison and review of helicopter safety management that should be accompanied to this end. For research purposes, helicopter regulations and helicopter accident statistics were analyzed, with a high accident rate associated with pilot error and night flight. It was proposed that future preparations would require reinforcement of laws and regulations, reinforcement of pilots' night training, and introduction of training and preflight risk assessments. This study will provide a direction for future helicopter safety. This study will provide for future direction of helicopter safety research.

• 대한안전경영과학회지
• /
• 제2권1호
• /
• pp.99-116
• /
• 2000

Accident statistics cite the flightcrew as a primary contributor in about 70 percent of accidents involving transport category airplanes. The introduction of modem flight deck designs, which have automated many piloting tasks, has reduced or eliminated some types of flightcrew errors, but other types of errors have been introduced. To identify the impedimental factors in highly automated modem airplane cockpit systems, this study used readily available information sources and case study, From the evidence, this study identified issues that show vulnerabilities in pilot management of automation, situation awareness, communication between pilots and controllers, pilot's training and evaluation methods. The next step will require the aviation community to solve these problems for the safety improvement.

• 한국군사과학기술학회지
• /
• 제16권2호
• /
• pp.138-145
• /
• 2013

Airworthiness certification is a government certification for the military aircraft to safely attain, sustain and terminate flight and It is a mandatory process of qualifying the flight safety within the operational boundaries of a military aircraft. To save the manhour, time and cost for applying all the airworthiness certification criteria to the aircraft equipped with flight control switching mechanism development program, an identification of the risk and systematic assessment of risk is analysed. Airworthiness redesign actions so called software switching mechanism for the modified aircraft in the flight technology and electric system area are suggested to reduce the risk hazard index.

• 한국항공운항학회지
• /
• 제29권3호
• /
• pp.117-121
• /
• 2021

The Multi-crew Pilot License (MPL) is a new pilot qualification introduced by ICAO to train co-pilots for transport aircraft based on efficient and stable competency to respond to changes in the operating environment and technology. ICAO and the European Union Aviation Safety Agency (EASA) require a minimum flight of 240 hours for MPL qualification training, and allow the use of flight simulation training devices (FSTDs) for most of the training, specifying the performance requirements for FSTDs. As South Korea is also preparing for the operation of the MPL training program, it is essential to establish the operating standards for FSTDs required for MPL training. This study aims to identify the international standards for FSTDs related to MPL training, and to compare them with the current operating standards for FSTDs in South Korea for presenting a standard (draft) that can be used when introducing domestic MPL training programs in the future.

• 한국항공운항학회지
• /
• 제19권4호
• /
• pp.117-122
• /
• 2011

EMSS is the organic system offering quick and efficient transfer and treatment for those who need an emergency service. For EMS aviation operation is the important transportation for the common benefits. There are several types of aviation operation. Among the different types of the operations, helicopter operation is very common because it is free from any locations. Notwithstanding the benefit, various types of EMS helicopter accidents and incidents are occurred because of its poor operation condition. In South Korea, even though so much effort was put to decrease the accidents rates, there are still many accidents happening by fire helicopters and the forest service helicopters. Therefore, in order to regularize the EMSH operation, measures for the aviation safety have to be prepared. This research is, related to the EMSH, focused on the suggestion of safety measure for the EMSH in Korea based on the accidents analysis in various countries.

• 한국군사과학기술학회지
• /
• 제27권4호
• /
• pp.466-473
• /
• 2024

An Emergency Destruction System is inevitable for ensuring safety both at sea and in populated areas, particularly during emergency detonations triggered by abnormal missile flight or upon mission completion. This paper introduces a novel method for developing an Emergency Destruction System capable of precisely calculating the Instantaneous Impact Point(IIP) during high-speed, maneuverable long-range surface-to-air missile flight tests. The Emergency Destruction System designed for long-range surface-to-air missile flight tests generates impact position tables that meticulously incorporate wind errors and navigation equations based on the Earth's ellipsoidal model. Factors such as the Coriolis effect and the direction of the gravitational acceleration vector are accounted for, significantly enhancing the accuracy of IIP determination amidst highly variable missile speed and attitude.

• 한국항공운항학회지
• /
• 제21권1호
• /
• pp.1-7
• /
• 2013

To have the competitiveness in the future worldwide small aircraft market, we should be able to develop the aircraft which is highly safe, easy to fly, and having excellent flight characteristics. FBW(Fly-By Wire) system is essential for the enhancement of flight safety and control easiness. FBW system that has been applied only to the modern fighter and transport aircraft is recently applied to smaller aircraft such as regional aircraft, business aircraft and even small aircraft. The purpose of this research includes the development of flight control computer, the definition of FBW system component, the design concept of each component for redundant management, OFP(Operational Flight Program) development, FBW system integration and HILS(Hardware In-the Loop Simulation) verification environment to test this FBW system.