• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.735-744
• /
• 2012

In order to quantify the flow distribution characteristics of APR+ reactor, a test was performed on a test facility, ACOP ($\underline{A}$PR+ $\underline{C}$ore Flow & $\underline{P}$ressure Test Facility), having a length scale of 1/5 referring to the prototype plant. The major parameters are core inlet flow and outlet pressure distribution and sectional pressure drops along the major flow path inside reactor vessel. To preserve the flow characteristics of prototype plant, the test facility was designed based on a preservation of major flow path geometry. An Euler number is considered as primary dimensionless parameter, which is conserved with a 1/40.9 of Reynolds number scaling ratio. ACOP simplifies each fuel assembly into a hydraulic simulator having the same axial flow resistance and lateral cross flow characteristics. In order to supply boundary condition to estimate thermal margins of the reactor, the distribution of inlet core flow and core exit pressure were measured in each of 257 fuel assembly simulators. In total, 584 points of static pressure and differential pressures were measured with a limited number of differential pressure transmitters by developing a sequential operation system of valves. In the current study, reactor flow characteristics under the balanced four-cold leg flow conditions at each of the cold legs were quantified, which is a part of the test matrix composing the APR+ flow distribution test program. The final identification of the reactor flow distribution was obtained by ensemble averaging 15 independent test data. The details of the design of the test facility, experiment, and data analysis are included in the current paper.

• Nuclear Engineering and Technology
• /
• v.44 no.7
• /
• pp.727-734
• /
• 2012

A new advanced safety feature of DVI+ (Direct Vessel Injection Plus) for the APR+ (Advanced Power Reactor Plus), to mitigate the ECC (Emergency Core Cooling) bypass fraction and to prevent switching an ECC outlet to a break flow inlet during a DVI line break, is presented for an advanced DVI system. In the current DVI system, the ECC water injected into the downcomer is easily shifted to the broken cold leg by a high steam cross flow which comes from the intact cold legs during the late reflood phase of a LBLOCA (Large Break Loss Of Coolant Accident)For the new DVI+ system, an ECBD (Emergency Core Barrel Duct) is installed on the outside of a core barrel cylinder. The ECBD has a gap (From the core barrel wall to the ECBD inner wall to the radial direction) of 3/25~7/25 of the downcomer annulus gap. The DVI nozzle and the ECBD are only connected by the ECC water jet, which is called a hydrodynamic water bridge, during the ECC injection period. Otherwise these two components are disconnected from each other without any pipes inside the downcomer. The ECBD is an ECC downward isolation flow sub-channel which protects the ECC water from the high speed steam crossflow in the downcomer annulus during a LOCA event. The injected ECC water flows downward into the lower downcomer through the ECBD without a strong entrainment to a steam cross flow. The outer downcomer annulus of the ECBD is the major steam flow zone coming from the intact cold leg during a LBLOCA. During a DVI line break, the separated DVI nozzle and ECBD have the effect of preventing the level of the cooling water from being lowered in the downcomer due to an inlet-outlet reverse phenomenon at the lowest position of the outlet of the ECBD.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.919-928
• /
• 2012

The applications of computers and communication system and network technologies in nuclear power plants have expanded recently. This application of digital technologies to the instrumentation and control systems of nuclear power plants brings with it the cyber security concerns similar to other critical infrastructures. Cyber security risk assessments for digital instrumentation and control systems have become more crucial in the development of new systems and in the operation of existing systems. Although the instrumentation and control systems of nuclear power plants are similar to industrial control systems, the former have specifications that differ from the latter in terms of architecture and function, in order to satisfy nuclear safety requirements, which need different methods for the application of cyber security risk assessment. In this paper, the characteristics of nuclear power plant instrumentation and control systems are described, and the considerations needed when conducting cyber security risk assessments in accordance with the lifecycle process of instrumentation and control systems are discussed. For cyber security risk assessments of instrumentation and control systems, the activities and considerations necessary for assessments during the system design phase or component design and equipment supply phase are presented in the following 6 steps: 1) System Identification and Cyber Security Modeling, 2) Asset and Impact Analysis, 3) Threat Analysis, 4) Vulnerability Analysis, 5) Security Control Design, and 6) Penetration test. The results from an application of the method to a digital reactor protection system are described.

• Nuclear Engineering and Technology
• /
• v.44 no.8
• /
• pp.897-910
• /
• 2012

Inappropriate communications can cause a lack of necessary information exchange between operators and lead to serious consequences in large process systems such as nuclear power plants (NPPs). In this regard, various kinds of taxonomies of inappropriate communications have been developed to prevent inappropriate communications. However, there seems to be difficult to identify inappropriate communications from verbal protocol data between operators. Because the existing taxonomies were developed for use in report analysis, there is a problem of 'uncertainty'. In consequence, this paper proposes a new taxonomy of inappropriate communications and provides some insights to prevent inappropriate communications. In order to develop the taxonomy, existing taxonomies for four industries from 1980 to 2010 were collected and a new taxonomy is developed based on the simplified one-way communication model. In addition, the ratio of inappropriate communications from 8 samples of audio-visual format verbal protocol data recorded during emergency training sessions by operating teams is compared with performance scores calculated based on the task analysis. As a result, inappropriate communications can be easily identified from the verbal protocol data using the suggested taxonomy, and teams with a higher ratio of inappropriate communications tend to have a lower performance score.

• Nuclear Engineering and Technology
• /
• v.50 no.4
• /
• pp.589-598
• /
• 2018

To maintain safety and reliability of reactors, redundant sensors are usually used to measure critical variables and estimate their averaged time-dependency. Nonhealthy sensors can badly influence the estimation result of the process variable. Since online condition monitoring was introduced, the online cross-calibration method has been widely used to detect any anomaly of sensor readings among the redundant group. The cross-calibration method has four main averaging techniques: simple averaging, band averaging, weighted averaging, and parity space averaging (PSA). PSA is used to weigh redundant signals based on their error bounds and their band consistency. Using the consistency weighting factor (C), PSA assigns more weight to consistent signals that have shared bands, based on how many bands they share, and gives inconsistent signals of very low weight. In this article, three approaches are introduced for improving the PSA technique: the first is to add another consistency factor, so called trend consistency (TC), to include a consideration of the preserving of any characteristic edge that reflects the behavior of equipment/component measured by the process parameter; the second approach proposes replacing the error bound/accuracy based weighting factor ($W^a$) with a weighting factor based on the Euclidean distance ($W^d$), and the third approach proposes applying $W^d$, TC, and C, all together. Cold neutron source data sets of four redundant hydrogen pressure transmitters from a research reactor were used to perform the validation and verification. Results showed that the second and third modified approaches lead to reasonable improvement of the PSA technique. All approaches implemented in this study were similar in that they have the capability to (1) identify and isolate a drifted sensor that should undergo calibration, (2) identify a faulty sensor/s due to long and continuous missing data range, and (3) identify a healthy sensor.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.17 no.3
• /
• pp.203-211
• /
• 2007

This study was conducted in cut rose cultivation field in Goyang to evaluate pesticide exposure of farmers and the relationship between the exposure and work environment/method for cut rose farmers. Dermal exposure was assessed with patch (thin chromatography layer paper), cotton glove by body parts during mixing and spraying works in which pyrethroid, organophosphate, carbamate pesticide were used in 4 cut rose greenhouses located in Goyang province, checking characteristics of environment/working method at the same time. Body parts assessed were as follows ; glove : hand, patch : head, neck(front/back), chest, back, shoulder(right/left), upperarm(right/left), forearm(right/left), thigh(right/left), shin(right/left). Pesticides were analyzed using gas chromatography(NPD/FID) after extracting with ethyl acetate. Exposure amount differed according to pesticide type. But after standardizing with total net weight of pesticide sprayed, there were no significant difference among pesticides. There were significant difference in exposure amount among body parts(especially exposure amount of thigh, shin were more than the others), which means exposure happen not by pesticide dispersion in air but by contact with cut rose(leaf, branch) indirectly. Walking forward during spraying made farmers more exposed than waling backward, these results means contacts with leaves/branches made exposure happen in cut rose greenhouse also. As a result, pesticide exposure in cut rose greenhouse was related with contact of leaf/branch which pesticide remained in, which made exposure pattern (especially exposure amount) differ by body parts

• Korean Journal of Health Education and Promotion
• /
• v.28 no.3
• /
• pp.31-42
• /
• 2011

Objectives: Busan had the highest mortality and the shortest life expectancy at birth among 16 provinces in Korea in 2008 and there were considerable health inequalities within the region. This study was performed to build up a priority setting framework in Healthy City Busan project. Methods: Analytic hierarchy process was used to determine the relative priority weight for different strategic and program dimensions along with the consistency of response. An on-site workshop-based meeting (calculating importance) and online survey (calculating risk) were conducted to obtain data from 8 experts. Results: The results showed that in strategic criteria "active health promotion & diseases prevention" and "building infrastructure for the Health City project" were two most important factors. In program criteria, considering both importance and risk scores, "making a healthy community" and "building community health centers" in disadvantaged areas were a top priority group. In addition, "enacting an ordinance for the Healthy City", "building the infrastructure for health impact assessment" and "making health care safety net for vulnerable population" were also higher priorities group. Conclusions: Our findings suggest that the Healthy City project in Busan should be focused on strengthening health equity and building infrastructure for sustainability of the project.

• Korean Journal of Adult Nursing
• /
• v.17 no.5
• /
• pp.697-708
• /
• 2005

Purpose: This study was to develop, implement, and evaluate an e-learning education program for improving practical knowledge and preventing nursing errors and adverse events of nurses working in the operating room (OR). Method: The e-learning program was developed and evaluated according to the following processes: 1) preparation phase 2) implementation phase 3) evaluation phase. In evaluation phase, the effectiveness was analyzed based on the Kirkpatrick's model. Results: The e-learning program consisted of OR basic nursing skills and techniques and nursing activities' manual based on the categories of nursing errors: surgical operation preparation, nursing skills and techniques, environment management, patient safety and comfort, and patient monitoring. The program was provided through on-line, http://cafe.daum.net/pnuhorn, for 4 weeks. The mean score(percent) of participants' satisfaction was $21.24{\pm}1.71$(68.2%). Their total knowledge level was significantly improved(Z=-3.00, p=.003) and specifically in the category of environment management(Z=-3.77, p<.001) and patient monitoring(Z=-2.46, p=.014). The occurrence of nursing errors or adverse events was a little decreased, but not statistically significant(Z=-3.10, p=.756). Conclusion: E-learning for nurses is one way of effective and efficient teaching-learning strategies. For better e-learning, it is important to develop the vital content of the education and objective measures for detecting nursing errors and adverse events.

• Korean Journal of Human Ecology
• /
• v.24 no.6
• /
• pp.795-809
• /
• 2015

The suicide rate in South Korea has been the highest among the OECD countries for more than 10 years. In addition, the suicide rate among the rural elderly is much higher than that of the elderly in urban areas and that of younger generations. The purpose of this study was to examine the general tendencies of family ties, community consciousness and suicide ideation of the rural elderly in Korea. Also, this study aimed to verify the mediating effect of community consciousness between family ties and suicidal ideation. The data for this study came from 283 elderly people (over 65 years old) living in 11 villages in South Korea. The data was gathered from July to August 2013. Baron and Kenny's (1986) step based regression from the SPSS Win 18.0 program was used to analyze this data. This study also utilized the Sobel-test. The results of this study are as follows. First, the suicidal ideation of the respondents had a lower score than the median score. However, the magnitude of suicidal ideation was still significant. Second, this study found that family ties and community consciousness have both direct and indirect effects on the reduction of suicidal ideation. Lastly, this study examined the mediating effects of community consciousness. The findings of this study are of great significance because they reconfirmed the importance of establishing a social safety net in local communities to replace adult children who have relocated to urban areas.

• The Korean Society of Law and Medicine
• /
• v.15 no.1
• /
• pp.239-262
• /
• 2014

The conventional medical appraisal which was done in the process of medical lawsuit was requested from the court to the designated hospital and was delivered as a pattern of one question and one answer in each. However, the comprehensiveness of medical appraisal which was pursued, for example, in Korea Medical Dispute Mediation and Arbitration Agency, could be guaranteed in terms of in-depth medical analysis as well as the broader capacity of the causality estimation besides. The comprehensiveness of appraisal would also include how well organized hospital system of medical care is and how well correlated job system among medical staffs, when medical dispute was happened at the hospital. This comprehensiveness will exert a big contribution on making a demonstrative medical care to prevent from the medical dispute and it could achieve the national plan of building the patient safety net which is effective in restoring the worsened quality of contemporary medical service. Therefore, the comprehensiveness of medical appraisal has to be designed to go forward interdisciplinary fused speciality rather than one division of medicine, which is also aiming at the reliable and consistent appraisal with the supreme dignity from one window. In addition to that, the objective and concrete frame of comprehensive appraisal under the computed connection has to be deliberated to make itself possible in collaboration with positive participation of medical community. The comprehensiveness of medical appraisal would serve to expand not only the capacity of speciality but also the ability of influence on a restorative justice, so that it give effect to an increased number of mediation and arbitration rather than medical lawsuit as well as a decreased number of the social cost and social conflict.