• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.545-548
• /
• 2009

Recently, researches related to automative mechanism have been widely studied to increase the driver's safety by continuously monitoring the driver's health condition to prevent driver's drowsiness. This paper describes the design of wearable chest belt for ECG and reflectance pulse oximetry for $SpO_2$ sensors based on wireless sensor network to monitor the driver's healthcare status. ECG, $SpO_2$ and heart rate signals can be transmitted via wireless sensor node to base station connected to the server. Intelligent monitoring system is designed at the server to analyze the $SpO_2$ and ECG signals. HRV(Heart Rate Variability) signals can be obtained by processing the ECG and PPG signals. HRV signals are further analyzed based on time and frequency domain to determine the driver's drowsiness status.

• Smart Structures and Systems
• /
• v.6 no.5_6
• /
• pp.749-765
• /
• 2010

There are on-going efforts to utilize guided waves for structural damage detection. Active sensing devices such as lead zirconate titanate (PZT) have been widely used for guided wave generation and sensing. In addition, there has been increasing interest in adopting wireless sensing to structural health monitoring (SHM) applications. One of major challenges in wireless SHM is to secure power necessary to operate the wireless sensors. However, because active sensing devices demand relatively high electric power compared to conventional passive sensors such as accelerometers and strain gauges, existing battery technologies may not be suitable for long-term operation of the active sensing devices. To tackle this problem, a new wireless power transmission paradigm has been developed in this study. The proposed technique wirelessly transmits power necessary for PZT-based guided wave generation using laser and optoelectronic devices. First, a desired waveform is generated and the intensity of the laser source is modulated accordingly using an electro-optic modulator (EOM). Next, the modulated laser is wirelessly transmitted to a photodiode connected to a PZT. Then, the photodiode converts the transmitted light into an electric signal and excites the PZT to generate guided waves on the structure where the PZT is attached to. Finally, the corresponding response from the sensing PZT is measured. The feasibility of the proposed method for wireless guided wave generation has been experimentally demonstrated.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.20 no.3
• /
• pp.213-228
• /
• 2007

Purpose: This master‘s thesis to evaluate the grade of life after medication a Dangguijakyak-san(pasabu) and Gyejibongnyeong-hwan(cheongwal) with in postmenopausal women get lowering quality of life caused by vasomotor symptoms with hot flush. Methods: A subject who signing on the clinical trial written consent by self-will is registered this clinical trial after decided suitable by selection and exception standard, after take a medical experiment and checkup according to clinical trial plan. Registered subject should valuated by settled schedule after take the testing medicine 1,2 during thirty-day. In this period, a subject allocated at relatively better suited experimental group by oriental doctor after consideration of general efficacy and nature of a medicine at second visiting. Results: The result of comparison in the remedial value with sixteen patients who ended the experiment is like next list. 1. There's no regarded difference of comparison in general conditions between two patient groups. 2. There's no regarded difference during observation period before take medicine. 3. By period of measurement, there's something regarded differences most of patients of two parts after taking medicine. 4. There's no regarded difference at alteration phase of each standard according to kind of medicine. 5. There's no abnormal views reflected at allergy, Laboratory and Physical Examination during experiment. Conclusion: This experiment evidence a Dangguijakyak-san and Gyejibongnyeong-hwan can help for improvement generally life quality of postmenopausal women and certify safety of herbs.

• Korean Medical Education Review
• /
• v.23 no.3
• /
• pp.185-193
• /
• 2021

Students must be familiar with clinical skills before starting clinical practice to ensure patients' safety and enable efficient learning. However, performance is mainly tested in the third or fourth years of medical school, and studies using the validity framework have not been reported in Korea. We analyzed the validity of a performance test conducted among second-year students classified into content, response process, internal structure, relationships with other variables, and consequences according to Messick's framework. As results of the analysis, content validity was secured by developing cases according to a pre-determined blueprint. The quality of the response process was controlled by training and calibrating raters. The internal structure showed that (1) reliability by generalizability theory was acceptable (coefficients of 0.724 and 0.786, respectively, for day 1 and day 2), and (2) the relevant domains had proper correlations, while the clinical performance examination (CPX) and objective structured clinical examination (OSCE) showed weaker relationships. OSCE/CPX scores were correlated with other variables, especially grade point average and oral structured exam scores. The consequences of this assessment were (1) making students learn clinical skills and study themselves, while causing too much stress for students due to lack of motivation; (2) reminding educators of the need to apply practical teaching methods and to give feedback on the test results; and (3) providing an opportunity for faculty to consider developing support programs. It is necessary to develop the blueprint more precisely according to students' level and to verify the validity of the response process with statistical methods.

• Journal of the Korea Convergence Society
• /
• v.10 no.6
• /
• pp.365-379
• /
• 2019

This review aimed to analyze characteristics and performances of patient and family-centered care interventions and evaluate the convergence effectiveness. Randomized controlled trials were searched, selected, data extracted and quality-assessed using the Risk of Bias in 15 databases. Characteristics suggested from 21 studies were provision of information, education, communication and family and friend participation. There were 89 measurement variables of performances. Patient outcome was measured by mortality, length of hospitalization, etc., indicated as significantly improved in 18 studies. This review has provided evidence that patient and family-centered care improved experience and performance of diverse patients, families and health-care providers. There is need to convergence adopt patient and family-centered care and conduct evidence-based studies for improvement of quality of healthcare and patient safety in the future.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.36 no.6
• /
• pp.451-456
• /
• 2018

UAVs (Unmanned Aerial Vehicles) are widely used for maintenance and monitoring of facilities. It is necessary to acquire a high-resolution image for evaluating the appearance state of the facility in safety inspection. In addition, it is essential to acquire the video data in order to acquire data over a wide area rapidly. In general, since video data does not include position information, it is difficult to analyze the actual size of the inspection object quantitatively. In this study, we evaluated the utilization of 3D point cloud data of bridges using a matching between video frames and reference photos. The drones were used to acquire video and photographs. And exterior orientations of the video frames were generated through feature point matching with reference photos. Experimental results showed that the accuracy of the video frame data is similar to that of the reference photos. Furthermore, the point cloud data generated by using video frames represented the shape and size of bridges with usable accuracy. If the stability of the product is verified through the matching test of various conditions in the future, it is expected that the video-based facility modeling and inspection will be effectively conducted.

• Smart Media Journal
• /
• v.7 no.4
• /
• pp.44-51
• /
• 2018

The purpose of this research is to collect atmospheric environmental information at specific altitudes in a range of 0 to 1 km above the surface and to monitor it using drones. The corresponding temperature and humidity were measured with the meteorological factors, and the amounts of fine dust and $CO_2$ were observed by the environmental factors so that they could receive the normal values. Monitoring the status of atmospheric gas emission in specific enterprises, industrial complexes and regions through the measurement is meant to help establish policies to reduce pollution factors. In conventional means previously practiced, exhaust gas detection accompanies a great deal of risks in terms of safety because the surveyor is directly exposed to the source of contamination such as the holes installed in the chimney. However, in our proposed method, the drone can collect information in a wide range under safe circumstances, which can be utilized through wide industrial areas.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.11
• /
• pp.1474-1480
• /
• 2018

When fires occur in high-rise buildings, it is difficult to determine whether each escape route is safe because of complex structure. Therefore, it is necessary to provide residents with escape routes quickly after determining their safety. We propose a method to measure the visibility of the escape route due to the smoke generated in the fire by analyzing the images. The visibility can be easily measured if the density of smoke detected in the input image is known. However, this approach is difficult to use because there are no suitable methods for measuring smoke density. In this paper, we use principal component analysis by extracting a background image from input images and making it training data. Background images and smoke images are extracted from images given as inputs, and then the learned principal component analysis is applied to map of as a new feature space, and the change is calculated and the visibility due to the smoke is measured.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.17 no.2
• /
• pp.139-165
• /
• 2019

The current status and prospect of decommissioning technology development at KAERI are reviewed here. Specifically, this review focuses on four key technologies: decontamination, remote dismantling, decommissioning waste treatments, and site remediation. The decontamination technologies described are component decontamination and system decontamination. A cutting method and a remote handling method together with a decommissioning simulation are described as remote dismantling technologies. Although there are various types of radioactive waste generated by decommissioning activities, this review focuses on the major types of waste, such as metal waste, concrete waste, and soil waste together with certain special types, such as high-level and high-salt liquid waste, organic mixed waste, and uranium complex waste, which are known to be difficult to treat. Finally, in a site remediation technology review, a measurement and safety evaluation related to site reuse and a site remediation technique are described.

• Transactions of the Korean Society of Pressure Vessels and Piping
• /
• v.15 no.1
• /
• pp.46-52
• /
• 2019

This work proposes a noncontact ultrasonic transducer for detecting wall-thinning of containment liner plates of nuclear power plants by measuring their thickness without physical contact. Because the containment liner plate is designed to prevent atmospheric leakage of radioactive substances under severe nuclear accident, its wall-thinning inspection is important for safety of nuclear power plants. Wall-thinning investigation of containment liner plates have been carried out by measuring their thickness with contact-type ultrasonic thickness gauge by inspectors and needs a lot of time and cost. As an alternative, an electromagnetic acoustic transducer measuring precisely thickness of containment liner plates without any physical contact or couplant was suggested in this research. A transducer generating and measuring shear ultrasonic waves in thickness direction was designed and wave field produced by the transducer was analyzed to verify the design. The working performance of the suggested transducer was tested with carbon steel plate specimens with various thicknesses. The test result shows that the proposed transducer can measure thickness of the specimens precisely without any couplant and implies that swift scanning of wall-thinning of containment liner plates will be possible with the proposed transducer.