• 제목/요약/키워드: Safety diagnosis

검색결과 982건 처리시간 0.03초

오차항과 러닝 기법을 활용한 예측진단 시스템 개선 방안 연구 (A Study on the Prediction Diagnosis System Improvement by Error Terms and Learning Methodologies Application)

  • 김명준;박영호;김태규;정재석
    • 품질경영학회지
    • /
    • 제47권4호
    • /
    • pp.783-793
    • /
    • 2019
  • Purpose: The purpose of this study is to apply the machine and deep learning methodology on error terms which are continuously auto-generated on the sensors with specific time period and prove the improvement effects of power generator prediction diagnosis system by comparing detection ability. Methods: The SVM(Support Vector Machine) and MLP(Multi Layer Perception) learning procedures were applied for predicting the target values and sequentially producing the error terms for confirming the detection improvement effects of suggested application. For checking the effectiveness of suggested procedures, several detection methodologies such as Cusum and EWMA were used for the comparison. Results: The statistical analysis result shows that without noticing the sequential trivial changes on current diagnosis system, suggested approach based on the error term diagnosis is sensing the changes in the very early stages. Conclusion: Using pattern of error terms as a diagnosis tool for the safety control process with SVM and MLP learning procedure, unusual symptoms could be detected earlier than current prediction system. By combining the suggested error term management methodology with current process seems to be meaningful for sustainable safety condition by early detecting the symptoms.

Intelligent Fault Diagnosis System for Enhancing Reliability of Coil-Spring Manufacturing Process

  • 허준;백준걸;이홍철
    • 대한안전경영과학회지
    • /
    • 제6권3호
    • /
    • pp.237-247
    • /
    • 2004
  • The condition of the manufacturing process in a factory should be diagnosed and maintained efficiently because any unexpected disorder in the process will be reason to decrease the efficiency of the overall system. However, if an expert experienced in this system leaves, there will be a problem for the efficient process diagnosis and maintenance, because disorder diagnosis within the process is normally dependent on the expert's experience. This paper suggests a process diagnosis using data mining based on the collected data from the coil-spring manufacturing process. The rules are generated for the relations between the attributes of the process and the output class of the product using a decision tree after selecting the effective attributes. Using the generated rules from decision tree, the condition of the current process is diagnosed and the possible maintenance actions are identified to correct any abnormal condition. Then, the appropriate maintenance action is recommended using the decision network.

도시가스시설에서 안전밸브의 분출성능에 관한 평가 연구 (Evaluation of Popping Performance of Safety Valves in City Gas Facilities)

  • 김영규;김청균
    • 한국안전학회지
    • /
    • 제13권2호
    • /
    • pp.104-108
    • /
    • 1998
  • In order to evaluate the performances of safety valves for low pressure, the popping pressure and flow rate of the natural gas have been investigated. The measured results of the popping pressure show that there is a big scattering depending on the manufacture year of a safety valve. And sample A showed the ideal popping pressure mode compared to other B and C samples. The popping flow rate of the safety valve is proportional to the seat size as the inlet pressure increases. These results may be used as a guideline for a design and diagnosis of the safety valve.

  • PDF

피어슨 상관계수를 이용한 적외선 열화상 안전 진단 시스템 개발 (The Development of Infrared Thermal Imaging Safety Diagnosis System Using Pearson's Correlation Coefficient)

  • 정종문;박성훈;이용식;김재현
    • 한국태양에너지학회 논문집
    • /
    • 제39권6호
    • /
    • pp.55-65
    • /
    • 2019
  • With the rapid development of the national industry, the importance of electrical safety was recognized because of a lot of new electrical equipment are installing and the electrical accidents have been occurring annually. Today, the electrical equipments is inspect by using the portable Infrared thermal imaging camera. but the most negative element of using the camera is inspected for only state of heating, the reliable diagnosis is depended with inspector's knowledge, and real-time monitoring is impossible. This paper present the infrared thermal imaging safety diagnosis system. This system is able to monitor in real time, predict the state of fault, and diagnose the state with analysis of thermal and power data. The system consists of a main processor, an infrared camera module, the power data acquisition board, and a server. The diagnostic algorithm is based on a mathematical model designed by analyzing the Pearson's Correlation Coefficient between temperature and power data. To test the prediction algorithm, the simulations were performed by damaging the terminals or cables on the switchboard to generate a large amount of heat. Utilizing these simulations, the developed prediction algorithm was verified.

라인스캔 카메라를 이용한 콘크리트 라이닝 자동점검진단 장비 활용성 평가 (Availability evaluation of automatic inspection equipment using line scan camera for concrete lining)

  • 이규필;임형준;김정흠
    • 한국터널지하공간학회 논문집
    • /
    • 제22권6호
    • /
    • pp.643-653
    • /
    • 2020
  • 교통통제 후 인력점검 방식으로 시행되고 있는 콘크리트 라이닝 점검방식은 교통통제에 의한 정체유발 및 이로 인한 사회적 손실비용이 발생되며, 교통사고 및 점검자 안전 사고 위험 등 다양한 문제점을 내포하고 있다. 이러한 문제점을 해결하기 위해 해외에서는 객관적이고 정량적 조사가 가능한 자동점검 장비 및 영상분석을 통한 콘크리트 라이닝 점검을 수행하고 있다. 본 연구에서는 인력점검 방식으로 시행되고 있는 콘크리트 라이닝 점검 및 진단방식의 문제점 해결 및 개선방안 검토를 위하여, 2019년 정밀안전진단을 시행한 ◯◯터널 상·하행선에 대하여 국내에 도입된 터널 자동점검진단 장비를 이용한 점검 시행 후 정밀안전진단 조사 결과와 비교 분석하였다. 터널 자동점검진단 장비를 이용한 점검은 정밀안전진단 보다 정확하게 균열 등 콘크리트 라이닝에 발생한 결함을 조사할 수 있는 것으로 나타났다.

교량에 설치된 도시가스배관의 안전관리에 관한 연구 (A Study on The Safety Management of City Gas Pipelines Attached on the Bridges)

  • 윤영만;손상근;최도균;이수경
    • 한국가스학회지
    • /
    • 제22권1호
    • /
    • pp.45-52
    • /
    • 2018
  • 이 논문에서는 도시가스 배관 중 교량에 설치된 배관 398개소에 대해 현황을 조사하고, 배관을 설치연도별, 길이별, 원격차단장치 설치여부 등 특성별로 분류하여 분석하였다. 분석결과 20년 이상 장기사용배관이 43.0%를 차지하고 있었고, 원격차단장치 미설치 교량배관은 89.4%에 달하는 등 드러난 현상에 대한 안전관리 방안을 제시하였다. 또한 조사된 교량설치 배관 중 76개소를 선정한 후 응력해석 전용프로그램인 CAESAR-II를 이용하여 응력특성을 연구하고, 교량배관 중 루프관을 설치할 경우 루프관의 위치 및 크기가 배관의 합성응력에 미치는 영향을 분석하였다. 본 연구의 결과를 통해 교량 배관의 설치, 검사 및 진단 기준 개선 등에 활용하여 교량설치 배관에 대한 안전성 향상에 도움이 될 수 있을 것으로 판단한다.

공동주택 등에 설치하는 도시가스 압력조정기의 안전성 향상에 관한 연구 (A Study on the Safety Improvement of City Gas Pressure Regulators in Apartment Housing)

  • 윤영만;권용재;김경호;장지현
    • 한국가스학회지
    • /
    • 제27권2호
    • /
    • pp.86-94
    • /
    • 2023
  • 본 연구는 공동주택에 도시가스를 공급하기 위해 정압기 대신 설치하는 공용 압력조정기의 안전성 향상을 위한 대안을 마련하기 위한 목적으로 진행되었다. 먼저, 국내 압력조정기의 안전기준 및 설치 실태를 조사하여 문제점을 도출하고 해결방안을 제시하였다. 또한 정량적 위험성평가 솔루션인 DNV Phast-Safeti 프로그램을 이용해 공동주택에 설치되는 압력조정기와 주변 가스설비에 내포된 가스누출 등의 위험성을 개인적 위험도와 사회적 위험도로 구분하여 평가하고, 압력조정기의 설치와 관리 측면에서 위험성 감소를 위한 방안을 도출하였다.