• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.32 no.4
• /
• pp.340-349
• /
• 2022

Objectives: The importance of MSDS is emphasized for communicating hazardous information due to the increase in the types and usage of chemical substances. The purpose of this study is to assess the reliability of MSDS by collecting and examining paint thinners commercially available in South Korea. Methods: Twenty-five paint thinners were purchased at paint stores and the provision of MSDS was checked. Quantitative and qualitative analysis was performed on the chemical constituents of the thinners using GC-MSD and GC-FID. Reliability was evaluated by the MSDS collection rate for the paint thinners and calculating the rate of matching between laboratory analysis results and the contents and composition of chemical constituents given in the MSDS. Results: Unlike a study conducted in 2006, MSDS were provided for all 25 thinners. As a result of qualitative analysis using GC-MSD, 104 chemical substances were detected. The substances with the highest detection rate were identified in the order of toluene, butyl acetate, acetone, xylene, and ethyl benzene. A component matching rate of 41% was found by comparing the differences between the number of substances detected in laboratory testing and the number of substances listed in the MSDS. Benzene, a carcinogen not listed in the MSDS, was detected in two thinners produced by a small company. The detected benzene contents were 0.039 and 0.040%. When benzene is used, it should be strictly handled according to the Industrial Safety and Health Act. However, since it is not listed on the MSDS, it is judged that benzene was not being managed as a carcinogen in the workplaces where it is used. Conclusions: Since the reliability of MSDS, which play an important role in hazard communication, was evaluated to be low, it is necessary to systematically and continuously secure this reliability. In particular, carcinogens should be managed more strictly.

• International Journal of Safety
• /
• v.4 no.1
• /
• pp.14-17
• /
• 2005

Recycled polyol was obtained by glycolysis of MDI-based Polyurethane(PU) rigid foam. The chemical structure of the recycled pclyol was confirmed by GC(gas chromatography) and 1H-NMR. The recycled polyol throughout the glycolysis contained liquid polyol and methylenedianiline(MDA). MDA which could cause liver cancer is carcinogenic material. TWA(Time Weighted Average.) amount for MDA in MSDS(Material Safety Data Sheets) was confined less than 0.1 ppm. The melting temperature of MDA is $92^{\circ}C$, and boiling temperature is $398^{\circ}C$. During the gylcolysis most of MDA was dissolved in liquid polyol. The probability that MDA diffuses into the atmosphere is low but there could be an absorption of MDA into skin. Furthermore because MDA is amine compound, recycled polyol which contained MDA had a difficulty in reaction control of polyurethane. Therefore reduction of MDA amount was needed strongly. In this study the elimination of MDA were performed through deamination of the recycled polyol by glycidyl ether compounds. As glycolysis was proceeded, the amount of MDA was 9.8 wt % at early stage and increased up to 14.0 wt % after 8 hours reaction. It was found that 2-Ethylhexyl glycidyl ether which contains aliphatic moiety was very effective compound for eliminating the primary aromatic amine compound :md the optimal mole ratio of 2-ethylhexyl glycidyl ether to MAD was 3. The final polyol after deamination by 2-ethylhexyl glycidyl ether has an appropriate viscosity(less than 500 centi poise) for polyurethane reaction.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.12
• /
• pp.1535-1542
• /
• 2012

A Heat Recovery Steam Generator(HRSG) is the main component of a Combined Cycle Power Plant(CCPP). It is a very large structure that is made from relatively thin metal sheets. Therefore, the structural integrity of an HRSG is very important to ensure safe operation during plant lifetime. In particular, thermal deformation and thermal fatigue have been revealed as the main causes of the mechanical degradation of an HRSG. In order to prevent unexpected damage, safety evaluation based on a large-scale analysis is necessary. Therefore, this study aims to improve the safety of HRSG by using Finite Element Analysis(FEA) results derived from large-scale analysis. Furthermore, the modified design is verified by comparing it with the original one. This result will be used as basic data for improving the safety of a vertical-type HRSG.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.3
• /
• pp.265-272
• /
• 2023

Objectives: Since the material safety data sheets(MSDS) submission and non-disclosure review system was introduced in January 2021, the implementation status of MSDS for chemical manufacturing and importing workplaces being supervised for the first time. Methods: A supervisory team consisting of two labor inspectors and one from the Korea Occupational Safety and Health Agency directly visited the selected workplaces to check compliance with the MSDS system as a whole. Results: As a result of supervising 214 chemical substance manufacturing/importing workplaces, a total of 241 violations of the law were found in 121 workplaces, or 57% of them. In response, the Ministry of Employment and Labor took legal action on 8 cases in 6 locations, imposed a fines totaling of 249.69 million won on 120 chemical handling workplaces, and took action to correct the violations immediately. Conclusions: Major violations were in the order of non-request for warning signs, non-submission of MSDS, non-execution of MSDS training, and non-posting of MSDS. This shows the reality that employers who handle chemical substances are sufficiently communicating chemical information to workers. In the future, the government will actively implement preparation and submission support and system guidance for the implementation of the MSDS system, while making efforts to ensure that the MSDS system works well in the field through thorough on-site supervision in the future.

• The Journal of the Korea Contents Association
• /
• v.12 no.4
• /
• pp.282-291
• /
• 2012

This study investigated the job satisfaction of care worker affect on service quality. It was intended to provide the basic information for enhancing the Job satisfaction and making better quality of service. In order to meet the above purpose, the questionnaire method was applied for the care workers who worked at the 16 home care facilities located in Busan metropolitan city. 250 sheets of questionnaire were distributed and the total of 216 sheets were sampled among the collected questionnaire and analyzed. For data analysis, the statistics package of SPSS/WIN 12.0 was employed to perform reliability test, descriptive statistics analysis, correlation analysis, regression analysis. And the obtained results are as follows: As the result of the regression analysis to find out how care worker's job satisfaction will affect towards the quality of the service, service quality increased as the care worker's job satisfaction rate was higher. For the job satisfaction's sub-variables, it showed high service quality as the satisfaction was increased in the order of task satisfaction level and job safety level.

• Journal of Environmental Impact Assessment
• /
• v.5 no.1
• /
• pp.107-121
• /
• 1996

The objective of this study is to establish the application method of environmental information system which is related to hazard identification for Health Risk Assessment. For establishing the environmental information system, fourteen hazardous chemicals were chosen and applicated to the database network such as RTKNET(Right Know Net), MSDS(Material Safety Data Sheets), TRI(Toxic Release Inventory), IRIS, AIRS, etc. The searching method of environmental information is classified to three sections such as the domestic commercial information company, international database agencies, and internet. Recently the importance of environmental information is being emphasized because it is essential 10 use database system in the field of environmental studies. Most of the foreign research organizations are communicating actively for information exchange, and the improvement of the quality of research. It is required to accumulate the data and develop them to database for future research.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.33 no.4
• /
• pp.517-527
• /
• 2023

Objectives: We examine cases of chemical poisoning that occurred in the cleaning of metal parts and the regulations on halogenated solvents in other countries and propose regulations necessary to prevent chemical poisoning from halogenated solvents. Methods: We collected cases of chemical poisoning through the website of the Korea Occupational Safety and Health Agency. A review of the literature was conducted focusing on regulations related to halogenated solvents in the United States and the European Union, particularly for cleaning metal parts. Among the Material Safety Data Sheets submitted to the government, MSDS containing eleven substances were extracted to confirm the composition and product use. We investigated cleaning methods for metal parts used in South Korea. For the hazard classification, the European Chemicals Agency or Japan's NITE's website was used. Results: In the case of poisoning, the cleaning methods involving trichloromethane were dipping and dry, which was not found in the literature. It was confirmed that many halogenated solvents and dimethyl carbonate were used for metal cleaning in South Korea. In vapor degreasing using TCE in the USA, even if the facility is strictly managed, such as by installing cooling coils in open cleaning facilities, the risk of exposure to TCE is considered to be not only carcinogenic but also a concern for acute and chronic effects. In comparison, exposure through Korean work methods such as dipping and drying operations is inevitably much higher. Conclusions: The transition to water-based cleaning with low-hazard chemicals should be a priority in the cleaning process. In the case of metal parts that require precise cleaning, if the use of a halogenated solvent is inevitable, a closed degreasing facility should be used to minimize exposure. The current regulations in the Occupational Safety and Health Act, the Chemical Substances Control Act, and the Air Environment Conservation Act do not require cleaning facilities to minimize emissions. To protect the health of workers using halogenated solvents to clean metal parts, regulations that require a fundamental reduction in exposure will be necessary.

• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.25 no.4
• /
• pp.506-515
• /
• 2015

Objectives: This study was conducted to evaluate the status of hazard communication regarding dental materials among dental hygienists in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Materials: A total of 310 dental hygienists were surveyed using self-administered questionnaires to investigate the status of hazard communication on dental materials and information needs. We collected instructions for use and material safety data sheets(MSDSs) for 67 dental materials frequently used at dental hospitals located in the Daegu Metropolitan City and the North Gyeongsang-do Province area. Results: The questionnaire surveys showed that only 11% of the 310 dental hygienists had knowledge of MSDS and 46.8% of respondents never read instructions for use before using materials. Just 7.4% of dental hygienists have undergone training on hazard information for dental materials. In particular, dental hygienists working at dental clinics had significantly lower response rates on knowledge of MSDS(p<0.001), reading of instructions for use(p=0.042) and training on the hazard information of dental materials(p=0.004) than those in dental hospitals or general hospitals. The essential information most desired by dental hygienists was hazard identification(82.3%) followed by first-aid measures(53.9%), handling and storage(51%), disposal considerations (49%) and toxicological information(47.1%). All dental materials were on foreign products which came from Japan(59.7%), the USA(26.9%) and Liechtenstein(13.7%). In terms of usage, 56.7% of dental materials were prosthetic, followed by conservation(31.3%), orthodontics(9%), and prevention(3%). We found that dental hygienists had accessed MSDSs for only five dental products among the 67 dental materials. The instructions for the use of the 67 dental materials provided hazard identification(64.2%), first-aid measures(83.6%), handling and storage(97%), disposal considerations(20.9%) and toxicological information(26.9%). Conclusions: Based on the results of this study, the hazard communication system for dental hygienists working at dental clinics should be improved.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.18 no.3
• /
• pp.69-75
• /
• 2014

The priority of repair areas are chosen with the probability distribution of 0.3mm wide crack and carbonation induced corrosion. Data is analyzed and evaluated based on the 28 section of Precise Inspection for Safety and Diagnosis (PISD) in seoul. As the crack is distributed in log-normal, the carbonation and cover are in normal distribution. To have rational in repair sections among 503 sheets of underground structure, it is adopted the reliability index as well as the environment factors: strength, sonic speed, $CO_2$ concentration, corrosion, and content of chloride.

• Nuclear Engineering and Technology
• /
• v.50 no.1
• /
• pp.25-34
• /
• 2018

The CINDER code has about 60 years of development history, and is thus one of the world's best transmutation computing codes to date. Unfortunately, it is complex and cumbersome to use. Preparing auxiliary input files for activation computation from MCNPX output and executing them using Perl script (activation script) is the first difficulty, and separation of gamma source computing script (gamma script), which analyzes the spectra files produced by CINDER code and creates source definition format for MCNPX code, is the second difficulty. In addition, for highly nonlinear problems, multiple human interventions may increase the possibility of errors. Postprocessing such as making plots with large text outputs is also time consuming. One way to improve these limitations is to make a graphical user interface wrapper that includes all codes, such as MCNPX and CINDER, and all scripts with a visual C#.NET tool. The graphical user interface merges all the codes and provides easy postprocessing of graphics data and Microsoft office tools, such as Excel sheets, which make the CINDER code easy to use. This study describes the VCINDER code (with visual C#.NET) and gives a typical application example.