연약지반에 위치한 교대의 기초로서 말뚝기초를 채택할 경우 교대배면의 연약지반에는 측방유동같은 문제등이 빈번히 발생하고 있다. 지반이 측방유동을 일으킬 경우 기초말뚝은 전형적인 수동말뚝임에도 불구하고 교대기초말뚝의 설계시 수동말뚝으로 설계되지 않고 있다. 이러한 이유로는 측방유동의 정확한 판정이 어려운 점과 현재까지 합리적인 설계법이 확립되지 않은점 등을 들 수 있다. 본 연구에서는 측방이동이 발생된 우리나라의 몇몇 교대를 조사하였다. 이 조사에 의거하여 연약지반의 측방유동 판정 및 교대의 측방이동을 예측할 수 있는 판정기준을 제시하고자 한다. 본 연구결과 사면안전율이 말뚝효과를 고려할 결우 1.8이하, 말뚝효과를 무시한 경우 1.5이하에서는 교대측방이동이 발생할 수 있는 것으로 나타났다. 특히 사면안전율이 말뚝효과를 무시한 경우 1.0이하, 말뚝효과를 고려할 경우 1.1 이하에서는 과대한 교대측방이동이 발생하는 것으로 나타났다. 또한 교대의 허용측방이동량을 5cm라고 하면 사면의 소요안전율은 1.4(말뚝효과를 무시한 경우) 혹은 1.6(말뚝효과를 고려한 경우)이상이 되어야 한다.
배전선로에서 지락사고가 발생할 경우 신속한 검출은 감전사고 예방, 전기화재 방지 및 전력설비의 최적 운용에 있어서 중요하다. BEF(Back-fed Earth Fault)는 일종의 배전선로 지락사고로 부하측이 지락되는 경우이며 지락전류가 매우 작기 때문에 전류 검출에 의하여 배전 계통을 보호하기는 어려우나 배전 자동화 지역에서는 UVR(Under Voltage Relay)을 이용하여 보호한다. 그러나 배전 자동화가 되지 않은 지역에서는 UVR에 의해 보호가 불가능하므로 BEF의 특성을 해석하여 경제적으로 BEF를 방지하여야 한다. 본 논문에서는 RTDS, EMTP 시뮬레이션, ETSA의 실증 시험 데이터를 비교, 검토하여 기준 영상전류치를 설정하고, 이를 적용하여 측정된 영상 전류와 설정된 기준치를 비교하여 3상-단일 접지 배전 시스템의 정상 상태와 BEF의 구분이 가능한 BEF검출 알고리즘을 제안하였다. 다양한 조건에서 ETSA의 현장 시험에 적용하여 검토한 결과 3상-단일 접지 배전 시스템에서 제안된 BEF 검출 알고리즘의 타당성이 입증되었다. 따라서 본 알고리즘을 적용하여 배전선로를 운용하면 BEF에 의한 재해의 예방이 가능하리라 사료된다.
본 연구에서는 대상물질을 선점한 후 그에 따른 세 가지 기준 즉 독성, 화재폭발, 환경기준과 각각의 피해예측기법을 설정하고 이 기준들을 알고리즘을 통한 통합한 종합위해등급으로서 선정된 대상물질에 적용하였다. 특히, 환경기준은 포괄적인 개념으로서 USCG 및 MSDS의 환경기준 분류와 NFPA의 건강위해성(Nh) 중 환경관련 부분을 조합하여 환경지수 모델화를 하였다. 또한 각 기준에 따른 피해예측 기법을 선택하여 지역별 인의에 위치한 화학물질 관련업체에 사용 또는 저장 중인 유해화학물질에 대해 적용하여 사용물질에 대한 종합위해등급 설정(단일물질에 대한 가연성, 독성, 반응성, 환경성에 대한 Hazard level 및 표시 모델화) 및 그에 따른 사고시 피해예측 강도산정 (CPQRA, IAEA, VZ eq), Risk contour를 구할 수 있었다. 이 결과 모든 화학공정 및 저장 등에서 발생할 수 있는 독성 누출, 화재폭발의 잠재적 위험성산정을 통한 안전성 평가의 Tool로 활용이 가능하다.
본 연구에서는 경량화를 위해 금속 링크를 탄소섬유/에폭시 복합재 링크로 대체하고자 파손 기준을 이용하여 복합재 링크가 주어진 하중 조건을 견딜 수 있는지를 평가하였다. 복합재의 파손 양상을 예측하기 위해 MMF 기준을 이용하였고, 기계적 시험을 수행하여 MMF의 기준 강도 파라미터를 구하였다. 연구결과 링크의 구멍 주위에서 응력집중이 발생하였고, 특히 굽힘 하중을 받을 때 링크 끝단과 구멍 주위에서 취약함이 드러났다. 파손 지수로부터 파손 양상을 예측하였고 매트릭스 인장 파손이 링크 끝단에서, 그리고 구멍 주위에서는 섬유의 압축 파손이 예측되었다. 본 연구를 통해 확보된 방법과 결과는 경량화를 위해 금속 부품을 탄소섬유/에폭시 복합재로 대체할 때 특정 하중 조건 하에서 복합재의 안전성을 평가하는 유용한 지침으로 활용할 수 있을 것이다.
The traffic accident types are largely classified into vehicle to vehicle accident, vehicle-to-person accident and single-vehicle. Especially, the single-vehicle accident types are severe when the vehicle crashed into road facilities such as bridge, piers, utility poles. The severity of single-vehicle accidents are ten times higher than that of all other accidents types. It is needed to consider to reduce accident severity. This study was conducted to develop crash worthy safety design facility to ensure the vehicle occupant safety. The simulation and the crash tests were conducted for assessment of the safety performance to check the criteria of CC2(Crash Cushion 2) level. THIV(Theoretical Head Impact Velocity) and PHD(Post-impact Head Deceleration) were used to assess occupant impact severity for crashes. The non-redirection collision test conditions for 900 kg and 1,300 kg-head on crash tests, 900 kg-1/4 offset crash tests, 1,300 kg-head on crash test with $15^{\circ}$angle were conducted. The simulation and experiment test result showed that THIV values were below 44 km/h criterion, PHD values were below the 20G. The development non-redirective crash cushion is expected to be used for the fixed object such as bridge piers for assuring occupant safety.
본 논문에서는 화재안전공학에서 사용되는 모델링 기법과 통계자료들을 검토하고 구조 신뢰성 분야의 확률론적 안전도 평가방법을 도입하여 선박에 대한 방화설계나 선급 규정을 정량적으로 평가하는 방법을 마련하였다. 본 논문에서 개발된 FSEM(Fire Safety Evaluation Module)은 화재안전도의 척도로서 마지막으로 대피하는 사람의 사망확률을 산정하는 프로그램이며, 이를 이용해서 규정에 의한 방화설비를 갖춘 소규모의 화재실에서 대피자에 대한 사망확률을 추정해 보았고, 민감도 해석을 통해 선박에 대한 정량적인 화재안전 평가에의 적용가능성을 검토해 보았다. 계산결과와 검토로부터 선박화재에 대한 새로운 설계지표와 대피상황에서의 인간행동에 대한 폭넓은 연구의 필요성 및 선박의 특수 상황을 고려할 수 있는 새로운 화재진척 모델에 대한 개발이 수행되어야 함을 제시하였다.
본 연구에서는 Al6061-T6 소재의 알루미늄 라이너와 탄소섬유-에폭시 및 유리섬유-에폭시 복합 소재를 적층으로 감아서 제조한 복합소재 연료탱크에 대한 강도안전성을 유한요소법(FEM)으로 해석하였다. 복합소재 연료탱크는 내구성 향상을 위해 자긴공정(autofrettage process)으로 제조한 다음에 압축천연가스를 공급하였다. 자긴공정을 거친 가스탱크의 응력안전에 대한 FEM 해석결과는 미국의 DOT-CFFC와 한국의 KS 설계안전 평가기준과 비교 평가하였다. FEM 계산결과에 의하면, 자긴공정을 거친 연료탱크의 응력강도는 돔 지역에서 약간 불안정한 것으로 나타났고, 몸체의 평행부에서는 비교적 균일한 안정성을 보여주고 있다. 자긴공정을 거친 복합소재 연료탱크의 평행부에서 관찰된 강도안전성 데이터는 평가기준 데이터로 제공된다. 9.2리터의 복합소재 연료탱크의 응력강도 안전성에 대한 계산결과에 따르면, 미국의 DOT-CFFC와 한국의 KS 평가기준치를 모두 만족하는 것으로 나타났기 때문에 안전한 설계라 할 수 있다.
As domestic buildings have been large-scaled, diversified and high-rise, there have been a consistent demand for design, development of construction technology and accident prevention activity as well as quality enhancement. In spite of governmental and related institutions' efforts for reducing national losses which come from numerous accidents, there have been endless small and large accidents on the construction site and thus, it is urgent to conduct empirical researches in this area. Currently safety supervision system in construction industry has enforced harm and danger prevention planning system, however it merely stick to other existing materials. In addition, it is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM(Process Safety Management) method using AHP(Analytic Hierarchy Process) and to development of PSM evaluation method in the construction. The reason why PSM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries, thereby strengthening their competitive edges. Boost of safety control system by PSM method could make an enormous contribution to preventing construction accidents on the site by establishing and securing an autonomous safety control system.
Conventionally, all the unsafe acts by human beings in relation to industrial accidents have been regarded as unintentional human errors. Exceptionally, however, in the cases with fatalities, seriously injured workers, and/or losses that evoked social issues, attention was paid to violating related laws and regulations for finding out some people to be prosecuted and given judicial punishments. As Heinrich stated, injury or loss in an accident is quite a random variable, so it can be unfair to utilize it as a criterion for prosecution or punishment. The present study was conducted to comprehend how categorizing intentional violations in unsafe acts might disrupt conventional conclusions about the industrial accident process. It was also intended to seek out the right direction for countermeasures by examining unsafe acts comprehensively rather than limiting the analysis to human errors only. In an analysis of 150 industrial accident cases that caused fatalities and featured relatively clear accident scenarios, the results showed that only 36.0% (54 cases) of the workers recognized the situation they confronted as risky, out of which 29.6% (16 cases) thought of the risk as trivial. In addition, even when the risks were recognized, most workers attempted to solve the hazardous situations in ways that violated rules or regulations. If analyzed with a focus on human errors, accidents can be attributed to personal deviations. However, if considered with an emphasis on safety rules or regulations, the focus will naturally move to the question of whether the workers intentionally violated them or not. As a consequence, failure of managerial efforts may be highlighted. Therefore, it was concluded that management should consider unsafe acts comprehensively, with violations included in principle, during accident investigations and the development of countermeasures to prevent future accidents.
이 논문은 통행선택행위를 간접효용함수 대신 체감비용을 비교하는 평가방법을 제시하였다. 체감비용 비교방법은 가계생산이론을 통행자가 통행비용과 시간 등 정량적 요소와 함께 안락성과 안전성 등 정량적 요소를 동시에 고려하는 경우에 적용하여 도출되었다. 이 분석에서는 통행행위가 통행목적 달성과 함께 여러 정성적 요소를 동시에 산출하는 과정을 기술하는 특수한 형태의 동차 공동생산함수를 고안하여 이용하였다. 통행대안별 체감비용은 금전적인 통행비용에 시간가치 중에서 정량적 요소에 대해 통행자가 느끼는 기회비용을 제한 값을 합하여 산출하였다. 이러한 체감비용은 통계적 측정가능조건을 충족시킬뿐더러 통행선택행위를 보다 합리적으로 설명할 수 있어, 통행선택에 대한 통계분석에서 간접효용함수에 비해 통계측정 대상으로서 보다 우수하다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.