• Korean Chemical Engineering Research
• /
• v.46 no.1
• /
• pp.156-163
• /
• 2008

Process change and modification, which are caused by process failure, equipment life cycle and economic environment, have been generated in the chemical plants. And the MOC (management of change) base on the reasonable process safety technology such as change judgment, hazard identification by accurate technical references and risk assessment. But it is difficult to carry out the MOC because of lack of experience, shortage of knowledge and none of process safety specialists. In this study, the MOC system which could make enhancement of safety by finding and complementing weakness of MOC in chemical facilities was developed. This developed MOC system based on QRA was recommended the obvious standard for decision-making process, MOC procedure based on risk assessment and risk estimation of the process modification. The study based on the above way sought the enhancement of safety by performing Risk Based MOC for chemical plants.

• Journal of the Korean Society of Safety
• /
• v.21 no.1 s.73
• /
• pp.72-78
• /
• 2006

In many chemical plants the change or modification is carried out without proper technical review and hazard analysis, and also without adequate technical staff and procedures for comprehensive monitoring of potential hazards resulting from the change. Such changes sometimes affect to the process safety badly if it is not managed properly. Therefore, in order to prevent major industrial accidents caused by change or modification, and also in order to apply Management of Change procedure easily in the field and minimize economic burden of company caused by plant changes, K-MOC(KOSHA-Management of Change) software has been developed and provided to the chemical industry.

• Proceedings of the Safety Management and Science Conference
• /
• 2000.05a
• /
• pp.193-200
• /
• 2000

Hazard and operability Review(HAZOP) is widely used as a process safety analysis which systematically identifies potential process deviations and settles the problems. In this paper, we carried out a process hazard analysis using HAZOP in K chemical plant. As a result, we showed that the plant could be operated more safely and be saved a lot of money by eliminating several existing hazardous factors through the change of processes and designs.

• Journal of the Korea Safety Management & Science
• /
• v.2 no.1
• /
• pp.129-139
• /
• 2000

Hazard and operability Review(HAZOP) is widely used as a process safety analysis which systematically identifies potential process deviations and settles the problems. In this paper, we carried out a process hazard analysis using HAZOP in K chemical plant. As a result, we showed that the plant could be operated more saftly and be saved a lot of money by eliminating several existing hazardous factors through the change of processes and designs.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.16 no.2
• /
• pp.43-50
• /
• 2008

ICAO(International Civil Aviation Organization) Doc 9803의 국제규정에 의거하여 SMS(Safety Management System-안전관리시스템)의 대표적인 비행안전 모니터링 프로그램으로 인정된 신개념의 운항감사제도인 LOSA(Line Operations Safety Audit-항공운항 안전감사)를 항공사에서 실시하여 정상 운항시의 운항승무원을 관찰하여 실제의 안전취약 및 위협요소, Error를 포착하여 텍사스대학 인적요인 연구소에서 작성한 최종보고서의 분석을 통해 제도와 방안을 개선한다. 본 논문에서는 LOSA실행을 통한 승무원들의 위협 및 error의 유형과 발생율, 관리율 및 관리여부를 분석하여 설명하고 항공사내 개선인 SCP(Safety Change Process)를 소개하는데 있다.

• Korean Journal of Human Ecology
• /
• v.20 no.6
• /
• pp.1167-1184
• /
• 2011

The goal of educating consumers regarding food safety is to increase consumer competency in food safety. In order to recognize consumer problems and to develop consumer competency in rapidly changing consumer environment, it is necessary to cultivate consumer knowledge, attitude, and ability on food safety required in performing the consumer role effectively. Within this context, it is necessary to develop consumer-oriented education programs which aim to change consumer values and behaviors with regard to food safety. Based on information obtained from focus group interviews, the need for educational programs for food safety, which are related to the whole process of food consumption, have been raised. The process of food consumption is divided into buying, cooking/eating, and after eating, based on the process of consumer decision making and consumer behavior. Scenarios for consumer education on food safety were developed depending on the process of food consumption. This study developed a pilot consumer education program which included the whole process of food consumption. The program of this study was designed to induce consumers to change their behavior through establishing values on food safety and may contribute to lay the foundation for the realization of food safety culture. The results will be utilized to provide future directions for consumer education programs and efficient educational materials on food safety. Finally, it is hoped that empirical evaluation and analysis on the effects of consumer education programs will be investigated in future studies.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.231-232
• /
• 2016

Configuration Management (CM) is a process of identifying and documenting the characteristics of a Structures, Systems and Components (SSCs), and of ensuring that changes to these characteristics are properly assessed, approved, issued, implemented and verified. There are requirement management, change control, facility configuration information management for CM activities. In order to improve safety of Nuclear Power Plant(NPP), it is necessary to manage change item systematically. Existing CM concept is focused on the NPP in operation. On the other hand, NPP under construction is difficult to efficiently manage the change because of different change process from varoius stake-holders. This research considers method of consolidation change process for NPP to ensure that approved changes are accurately reflected in the design requirements, facility configuration information, and the physical configuration.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10b
• /
• pp.1008-1011
• /
• 1996

Most control systems of power plants are using classical PID controllers for their process control. In order to get the desired control performances, the correct tuning of PID controllers is very important. Sometimes, it is necessary to retune PID controllers after the change of system operating condition and system design change, etc. Commercial auto-tuning controllers such as relay feedback controller can be used for this purpose. However, using these controllers to the safety-critical systems of nuclear power plants may be cause of unsafe operation, because they are using test signals for tuning. A new system identification auto-tuning method without using test signal has been developed in this paper. This method uses process input/output signals for system identification of unknown control process. From the model information of control process which was obtained from system identification approach, the optimal PID parameters can be calculated. The method can be used in the safety-critical systems because it is not using test signals during system modeling process.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.990-1003
• /
• 2006

To cope with the change of railway safety environment and to prevent the catastrophic accident, the railway safety management system was established through the legislation of railway safety rules. And to audit and evaluate the accomplishment of railway safety rules by the railway operators, the Integrated Railway Safety Audit System(IRSAS) has been conducting. This study find out the strategy to stabilize the IRSAS by applying Theory of Constraints(TOC) Thinking Process. For meeting the IRSAS's goal of effective levelling up of railway safety, the two necessary conditions, 1)the secure of substantial safety through the IRSAS and 2)the execution of efficient IRSAS, should be fulfilled. Estimated undesirable effects(UDEs) from the IRSAS were identified, and 3 of them were selected for creating the requisite conflict clouds. Entities from these conflict clouds were synthesized into a core conflict cloud that foamed the base of Current Reality Tree. The strategic direction for change extracted from the conflict cloud is the reinforcement of IRSAS preparation system including the level up of operator's self audit, the deepening of preliminary survey, the establishment of complementing system of audit check list and the build up of auditor's specialization. These injection were logically validated via a Future Reality Tree and expected to be confirmed by further progressing of IRSAS.

• Proceedings of the Safety Management and Science Conference
• /
• 2005.05a
• /
• pp.291-295
• /
• 2005