• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.127-137
• /
• 2016

It is widely recognised that the safety-belt is one of the most important and effective vehicle safety features. Nevertheless, actual safety-belt wearing rates are low in Korea, especially rear seats. In Korea, rear seat safety-belt use can be as low as 20%. Consolidating fitment of Safety Belt Reminder(SBR) is one of means to improve belt wearing rates. In this paper, we use the effect of wearing seat belt model as Evans(1991) model. As a key parameter, intial wearing seat belt rates is studied and final wearing seat belt rates is used as scenario related a human compliance variables. In this study, benefit analysis is performed when the effective SBR is made mandatory for all passenger car seat. According to study results, when the fitment of SBR is made mandatory for all passenger car seats in Korea, 119 lives are expected to be saved annually with a 90% observance rate of the SBR. In the same condition, benefit-cost ratio will be 1.84.

• Journal of the Ergonomics Society of Korea
• /
• v.13 no.1
• /
• pp.15-25
• /
• 1994

Based on Fatal Accident Reporting System (FARS) data, safety belt effect- tiveness in preventing fatalities is investigated for the following five types of crashes: frontal, left, rear, right, and rollover. Passenger cars containing two occupants, a driver and a right front passenger, are included in this analysis. For each crash type, these cars containing the two occupants are classified into four categories according to the safety belt usage categories for the two front seat occupants, namely, both belted, both unbelted, and either one was belted but not both. Relative risks of driver and right front passenger fatalities are compared among these four cases. For each crash type, two independent estimates of safety belt effectiveness are obtained for drivers and for right front passengers. The weighted average of the two estimates is calculated for drivers and for right front passengers for the five crash types. Using FARS data starting 1978 throught 1983, safety belts are more effective in rollover accidents than in frontal collisions. In rollover accidents, safety belt effectiveness estimate for drivers is $68%{\pm} 6% $ and that for right front passengers is $71%{\pm}6% $ , in which the error limits indicate one standard error. Sfety belt effectiveness estimates for drivers and right front passengers involved in frontal collisions are $41%{\pm} 9% $ and $37%{\pm} 10% $ , respectively. For left and right sided collisions and for both drivers and right-front-passengers, none of the four estimates are significantly different from 0%, statistically : however, when left and right sided collisions are combined with far sided occupants(drivers involved in right sided collisions and right front passengers involved in left sided collisions) safety belt effectiveness is significant, $38%{\pm} 12% $ . For rear collisions, the estimate for drivers shows statistically significant positive effect, $60%{\pm}23% $ . while for right-front-passengers the estimate is not significantly different from 0%. These results show that a safety belt is an effective restraint system not only in frontal crashes but also in a variety of crashes.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.3
• /
• pp.724-730
• /
• 2015

The safety-related accident in which the field operators of all sorts of industrial sites don't fasten the seat belt properly and which it generates is the tendency that it increases constantly every year. By sounding the announcement sound in case the operator did not fasten the seat belt and the person seat belt monitoring system proposed in this paper progressed the work the operator fastened the seat belt properly. In addition, at the same time with that, since the administrator monitored the seat belt wearing or no of the operators on a real time basis the safety-related accident which did not wear the safety equipment properly and which it generates was prevented.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.20 no.4
• /
• pp.10-15
• /
• 2012

The design of automobile occupant seat belt system has been studied by using MADYMO. Based on the FMVSS 208 (Federal Motor Vehicle Safety Standards 208) and the USNCAP (United States New Car Assessment Program) regulations, seat belt design parameters were chosen for the design improvement to the 5th percentile female dummy: limit force of load limiter, time to fire of shoulder belt, inlet length of shoulder belt, inlet length of lap belt. The design of experiment method was employed to optimize the design parameters of passenger seat belt. Range of injury probability due to the change of H-point position was estimated by the simulation.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.2
• /
• pp.88-93
• /
• 2004

This research aims to grasp the basic knowledge of green belt, which exerts far-reaching effects upon safety, by comparing the revelation of the green belt of the two cities-Japan and China. In result, features of both countries were clarified. The green belt of Japan emphasizes on the function during emergency cases such as natural disasters, while the green belt in China, stresses its' function toward social safety in usual status, such as crimes, accidents or environmental pollution. Also, the function of the green space at normal situations has many in common between these two countries; however, the concepts differ according to geological or social system.

• Journal of Fashion Business
• /
• v.10 no.3
• /
• pp.129-142
• /
• 2006

This research chose 135 environmental cleaners in Busan Metropolitan City as subjects. First, the reality of wearing their safety jackets was investigated. Next, visual evaluation of the reflexive function of the current safety jackets was made. Then, based on the above results and the subsequent improvement proposal, the final product, the research costume, was made. 1. Based on the investigation of the wearing reality of safety jackets and the visual evaluation results of the reflexive function, an improvement proposal was made. As cleaners are usually seen sidewise on the roads and lateral luminosity is rather low, this aspect was compensated on the part of a jacket. Also, the reflexive belt used the diagram of ${\Delta}$ to improve visual effects. 2. As the lower body held the accident frequency of 45.0%, the sides of pants had the reflexive belt to increase visibility. 3. In consideration of the mutual effects between the background cloth and general reflexive width, the same width (5cm) of the reflexive belt as that of Type A was adopted.

• Journal of the Korean Society for Precision Engineering
• /
• v.23 no.8 s.185
• /
• pp.137-144
• /
• 2006

This study is concerned with the relation between steelbelt width and belt edge separation of a tire. Belt edge separation causes tire burst and threatens passenger's safety. For the reason, it is important to predict durability caused by belt edge separation in the early stage of the tire structure design. Usually, passenger car tires have two layers of steelbelts having opposite steel cord's angles, which makes a shear behaviour between each belt layer. Shear behaviour is one of reason to cause belt edge separation. In this study, to predict belt edge separation, we suggested the prediction method of belt edge separation and evaluated the effect of steelbelt width on the belt edge separation using FEM. We also studied on main parameters to affect shear behaviour at the belt edge area.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.2006-2010
• /
• 2005

This study is concerned with the relation between steelbelt and belt edge separation. Belt edge separation causes tire burst and threatens passenger's safety. For that reason, it is important to predict durability caused by belt edge separation first in tire structure design step. In this study, to predict belt edge separation, we suggest the prediction method of belt edge separation and evaluate the effect of steelbelt width on the belt edge separation using FEM. We study on analysis parameter also to do exact estimation about the shear behaviour of belt edge area.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.6
• /
• pp.959-964
• /
• 2010

Seat belt is an important means to protect drivers and passengers from the damages by car accidents. Many ways to increase the seat belt wearing rate have been proposed through human factors researches. The primary ways to increase seat belt use rate have emphasized the intention-behavior cycle. This study focused on the gap between intention and behavior. The gap may be bridged by the habit for seat belt use behavior. Divers following a desirable car starting sequence, from sitting on the chair, fastening seat belt, starting engine to moving a car, reported that higher belt wearing rate and unconscious behavior (automated response). That is, the habitualized procedure knowledge prevented drivers from forgetting to fasten their seat belt. The reminder systems such as warning light and warning sound could not significantly give an influence in remembering to fasten seat belt. In order to increase the seat belt use rate, the desirable car starting procedure should be included in the driving education program.

• Journal of Auto-vehicle Safety Association
• /
• v.6 no.1
• /
• pp.22-26
• /
• 2014

Fatality of accidents on curved roads where rollover accidents are likely to take place was higher than that on straight roads. We ought to investigate factors affecting injury severity of occupant in a vehicle rollover accident. From January 2011 to December 2013, we collected data about rollover motor vehicle crash accident. We surveyed occupant's injury, vehicle type, safety devices, type of rollover accident and the number of turn in accident. Of the 132 subjects, 56.1% were males, 50.8% were drivers, 48.5% fastened seat belt, and air bag deployed in 12.1%. Among injuries sustained head, chest and abdomen were major sites of severe injury(Abbreviated injury scale>2). Seat belt use, rollover type, and the number of 1/4 turn were found to have significant positive correlations with Injury Severity Score. The regression analysis herein found significance in safety belt use and the number of 1/4 turn. Seat belt use was a significant factor affecting injury severe of occupant in rollover accident.