• 한국독성학회:학술대회논문집
• /
• 한국독성학회 2002년도 Molecular and Cellular Response to Toxic Substances
• /
• pp.196-196
• /
• 2002

p16INK4a tumor suppressor gene transfer in the non-small cell lung cancer cells by transduction of recombinant adenovirus (Ad5CMV-p16) resulted in significant inhibition of cancer cell growth (Anticancer Res., 1998, 18:3257-3261). As a safety concern, we have investigated gene and protein expression after transduction of adenoviral vector (Ad5CMV-p16) in human non-small cell lung cancer (A549) cells by using microarray and 2D gel electrophoresis/ MALDI-TOF.(omitted)

• 한국항해항만학회:학술대회논문집
• /
• 한국항해항만학회 2019년도 춘계학술대회
• /
• pp.195-196
• /
• 2019

현재 개발 중인 자율주행 선박의 안전한 자율주행 운항 안전성을 확보하기 위하여 COLREG를 바탕으로 하는 다중 장애물회피 알고리즘을 연구하였다.RADAR에서 제공하는 외부 장애물의 VECTOR 값을 활용하여 각 장애물의 CPA와 TCPA를 분석하여 기 값을 기준으로 장애물을 구분하고 다중 장애물 회피 상황을 고려한 위험도 산정하였고 최소한의 안전 상황을 확보하기 위한 회피 동작 적용 방법에 관한 연구를 하였다.

• International Journal of Advanced Culture Technology
• /
• 제10권3호
• /
• pp.25-32
• /
• 2022

This study analyzes the impact of occupational accidents on economic growth and labor productivty losses in Korea between January 2008 and July 2018, using the Vector Error-Correction Model (VECM). According to the analysis, the occurrence of occupational accidents was revealed to reduce the number of employed workers and also hinder economic growth. This can be reinterpreted as the reduction of occupational accidents does not cause labor losses in the industry, rather may induce economic growth. Also, the findings discovered that an increase in the number of workers may lead to increase in the probability of occupational accidents in the short term. This suggests that greater number of work-related accidents may occur during the early stages- due to new employees' lack of knowledge related to safety at workplace.

• 전력전자학회논문지
• /
• 제22권1호
• /
• pp.18-26
• /
• 2017

This paper proposes the model predictive control with space vector modulation (SVM) method for current control of voltage-source inverter. Unlike the conventional method using a limited number of voltage vectors by switching states, the proposed method can consider various voltage vectors to identify the optimized voltage vector. The various voltage vectors are obtained by subdividing existing voltage vectors. The optimized voltage vector that minimizes the cost function is selected and applied to the inverter by using the SVM. The various voltage vectors and SVM reduce current ripples in the output AC side of the inverter compared with the conventional method. The effectiveness and performance of the proposed method are verified through simulation and experiment with a three-phase two-level voltage-source grid-connected inverter.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권10호
• /
• pp.5078-5094
• /
• 2019

In recent years, the development of drone technologies has promoted the widespread commercial application of drones. However, the ability of drone to carry explosives and other destructive materials may bring serious threats to public safety. In order to reduce these threats from illegal drones, acoustic feature extraction and classification technologies are introduced for drone sound identification. In this paper, we introduce the acoustic feature vector extraction method of harmonic line association (HLA), and subband power feature extraction based on wavelet packet transform (WPT). We propose a feature vector extraction method based on combined HLA and WPT to extract more sophisticated characteristics of sound. Moreover, to identify drone sounds, support vector machine (SVM) classification with the optimized parameter by genetic algorithm (GA) is employed based on the extracted feature vector. Four drones' sounds and other kinds of sounds existing in outdoor environment are used to evaluate the performance of the proposed method. The experimental results show that with the proposed method, identification probability can achieve up to 100 % in trials, and robustness against noise is also significantly improved.

• Structural Engineering and Mechanics
• /
• 제77권2호
• /
• pp.231-243
• /
• 2021

In this paper, a dynamic response mapping model of the wheel-rail system is established by using the support vector regression (SVR) method, and the hierarchical safety thresholds of the subgrade void are proposed based on the reliability theory. Firstly, the vehicle-track coupling dynamic model considering the subgrade void is constructed. Secondly, the subgrade void area, the subgrade compaction index K30 and the fastener stiffness are selected as random variables, and the mapping model between these three random parameters and the dynamic response of the wheel-rail system is built by using the orthogonal test and the SVR. The sensitivity analysis is carried out by the range analysis method. Finally, the hierarchical safety thresholds for the subgrade void are proposed. The results show that the subgrade void has the most significant influence on the carbody vertical acceleration, the rail vertical displacement, the vertical displacement and the slab tensile stress. From the range analysis, the subgrade void area has the largest effect on the dynamic response of the wheel-rail system, followed by the fastener stiffness and the subgrade compaction index K30. The recommended safety thresholds for the subgrade void of level I, II and III are 4.01㎡, 6.81㎡ and 9.79㎡, respectively.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.376-386
• /
• 2020

The aim of this study was to develop a new efficient strategy that uses the Vector form Intrinsic Finite-element (VFIFE) method to conduct the static and dynamic analyses of marine pipes. Nonlinear problems, such as large displacement, small strain, and contact and collision, can be analyzed using a unified calculation process in the VFIFE method according to the fundamental theories of point value description, path element, and reverse motion. This method enables analysis without the need to integrate the stiffness matrix of the structure, because only motion equations of particles established according to Newton's second law are required. These characteristics of the VFIFE facilitate the modeling and computation efficiencies in analyzing the nonlinear dynamic problem of flexible pipe with large deflections. In this study, a three-dimensional (3-D) dynamical model based on 3-D beam element was established according to the VFIFE method. The deep-sea flexible pipe was described by a set of spatial mass particles linked by 3-D beam element. The motion and configuration of the pipe are determined by these spatial particles. Based on this model, a simulation procedure to predict the 3-D dynamical behavior of flexible pipe was developed and verified. It was found that the spatial configuration and static internal force of the mining pipe can be obtained by calculating the stationary state of pipe motion. Using this simulation procedure, an analysis was conducted on the static and dynamic behaviors of the flexible mining pipe based on a 1000-m sea trial system. The results of the analysis proved that the VFIFE method can be efficiently applied to the static and dynamic analyses of marine pipes.

• 센서학회지
• /
• 제31권6호
• /
• pp.433-440
• /
• 2022

Recently, owing to global warming, average summer temperatures are increasing and the number of hot days is increasing is increasing, which leads to an increase in heat stroke. In particular, outdoor workers directly exposed to the heat are at higher risk of heat stroke; therefore, preventing heat-related illnesses and managing safety have become important. Although various wearable devices have been developed to prevent heat stroke for outdoor workers, applying various sensors to the safety helmets that workers must wear is an excellent alternative. In this study, we developed a smart helmet that measures various vital signs of the wearer such as body temperature, heart rate, and sweat rate; external environmental signals such as temperature and humidity; and movement signals of the wearer such as roll and pitch angles. The smart helmet can acquire the various data by connecting with a smartphone application. Environmental data can check the status of heat wave advisory, and the individual vital signs can monitor the health of workers. In addition, we developed an algorithm that classifies the risk of heat-related illness as normal and abnormal by inputting a set of vital signs of the wearer using a support vector machine technique, which is a machine learning technique that allows for rapid binary classification with high reliability. Furthermore, the classified results suggest that the safety manager can supervise the prevention of heat stroke by receiving feedback from the control system.

• 해양환경안전학회지
• /
• 제25권4호
• /
• pp.498-503
• /
• 2019

해양산업분야에서는 극심한 대기오염으로 인하여 전기추진선박에 대한 관심이 높아지고 있다. 이로 인해 선내 전력품질의 저하를 개선하기 위한 연구가 활발히 진행되고 있다. 기존 DFE 정류기의 입력전류 고조파 함유량을 완화시키기 위해 수동형필터, 노치필터, 능동형필터 등을 이용한 다양한 방법이 등장하였다. 그 중에서도 능동필터의 일종인 AFE(Active Front End) 정류장치가 우수한 기술로써 평가받고 있다. 본 논문에서는 공간벡터변조에 의한 AFE정류장치의 전류제어방식을 제안하였다. 기존의 히스테리시스 방식, 삼각파 변조방식 및 공간벡터변조방식을 PSIM을 사용해 시뮬레이션을 수행하여 비교, 분석하였고, 그 결과 공간벡터변조방식이 구조가 간단하고 성능이 가장 우수함을 확인하였다.

• Korean Chemical Engineering Research
• /
• 제60권2호
• /
• pp.223-228
• /
• 2022

화학공정에서 의도되지 않게 발생하는 이상은 큰 사고를 유발할 수 있다. 이러한 문제를 해결하기 위해, 신속하게 이상의 원인을 감지하고 판별하는 이상 진단 모델이 필요하다. 하지만, 이상 진단을 연구하는 대부분 연구의 경우, 상용프로그램에서 공정 시뮬레이션을 이용하여 이상 데이터를 생성하고 이를 이용하여 연구한 방법론을 적용하고 있다. 이는 실제 공정상에서 이상을 포함하는 실제 데이터를 얻는 데 많은 제약이 있음을 의미한다. 본 연구에서는 실제 폴리스티렌 반응기에서 얻은 이상 데이터와 정상 데이터를 분석하여 적절한 이상 진단 모델을 설계하고자 하였다. 먼저, 정상 데이터를 분석하여 세 가지의 조업 모드가 존재함을 확인하였으며, 모드 판별을 위한 모델을 SVM (Support Vector Machine)을 이용하여 만들었다. 각 조업 모드 별로 PCA (Principal Component Analysis)를 이용하여 이상 진단 모델을 만들었으며, 실제 이상 데이터를 이용하여 계산한 결과 신속하게 이상을 진단할 수 있음을 확인하였다. 본 연구에서 제안한 모델을 통해, 실제 사고가 발생하는 경우 신속한 대처가 가능하며, 이는 잠재적인 손실의 감소에 기여할 수 있음을 의미한다.