• 제목/요약/키워드: Safety State

검색결과 2,714건 처리시간 0.031초

Effects of Candida norvegensis Live Cells on In vitro Oat Straw Rumen Fermentation

  • Ruiz, Oscar;Castillo, Yamicela;Arzola, Claudio;Burrola, Eduviges;Salinas, Jaime;Corral, Agustin;Hume, Michael E.;Murillo, Manuel;Itza, Mateo
    • Asian-Australasian Journal of Animal Sciences
    • /
    • 제29권2호
    • /
    • pp.211-218
    • /
    • 2016
  • This study evaluated the effect of Candida norvegensis (C. norvegensis) viable yeast culture on in vitro ruminal fermentation of oat straw. Ruminal fluid was mixed with buffer solution (1:2) and anaerobically incubated with or without yeast at $39^{\circ}C$ for 0, 4, 8, 16, and 24 h. A fully randomized design was used. There was a decrease in lactic acid (quadratic, p = 0.01), pH, (quadratic, p = 0.02), and yeasts counts (linear, p<0.01) across fermentation times. However, in vitro dry matter disappearance (IVDMD) and ammonia-N increased across fermentation times (quadratic; p<0.01 and p<0.02, respectively). Addition of yeast cells caused a decrease in pH values compared over all fermentation times (p<0.01), and lactic acid decreased at 12 h (p = 0.05). Meanwhile, yeast counts increased (p = 0.01) at 12 h. C. norvegensis increased ammonia-N at 4, 8, 12, and 24 h (p<0.01), and IVDMD of oat straw increased at 8, 12, and 24 h (p<0.01) of fermentation. Yeast cells increased acetate (p<0.01), propionate (p<0.03), and butyrate (p<0.03) at 8 h, while valeriate and isovaleriate increased at 8, 12, and 24 h (p<0.01). The yeast did not affect cellulolytic bacteria (p = 0.05), but cellulolytic fungi increased at 4 and 8 h (p<0.01), whereas production of methane decreased (p<0.01) at 8 h. It is concluded that addition of C. norvegensis to in vitro oat straw fermentation increased ruminal fermentation parameters as well as microbial growth with reduction of methane production. Additionally, yeast inoculum also improved IVDMD.

쪽방밀집지역의 주거환경과 주민들의 사회적 배제에 대한 GIS 활용 연구 (GIS-based Study on Residential and Neighboring Environment and Residents' Social Exclusion in Slum Area)

  • 김동선
    • 한국콘텐츠학회논문지
    • /
    • 제17권8호
    • /
    • pp.209-225
    • /
    • 2017
  • 대전시 쪽방밀집지역의 주거환경 문제점 및 주거환경이 주민들의 사회적 배제에 미치는 영향을 알아보기 위해 GIS(지리정보시스템)기반 커뮤니티매핑 및 주민 대상의 설문조사를 실시하였다. 지역주민들의 지리정보 및 기타 속성을 지도화한 결과, 여성과 고령자가 중심지역에 밀집하는 현상이 나타났으며 2009년과 2016년의 자료비교를 통해 빈곤밀집지역이 다소 분산되는 경향을 살펴볼 수 있었다. 또한 이 지역의 실내외 모습을 담은 252장의 사진을 대상으로 의미단위별 유목화, 범주화 작업을 실시, 주거환경문제를 미관-위생, 협소-주택기능미비, 안전-사생활노출, 낙인의 4가지 범주로 분류하였다. 사진자료를 통한 커뮤니티매핑실시 결과 이 지역이 4곳의 구역으로 구분되며 주택형태, 주거형성의 역사, 비빈곤지역과의 접촉면, 폐쇄와 개방 등의 특징으로 주거문제가 달라진다는 점을 발견하였다. 또 주민대상 설문조사를 실시, 구역별로 일자리참가여부, 이웃만족도, 낙인, 사회적 배제에 의미있는 차이가 있음을 발견하였다. 마지막으로 회귀분석 결과, 주거만족도가 사회적 배제에 가장 큰 요인임이 드러났다. GIS기반의 본 연구를 통해 향후 이 지역에 대한 주거환경 개선에 있어서 구체적 접근과 문제별 대응이 이루어질 것을 제언하는 바이다.

비주얼 머천다이징 관점에서의 무인 편의점 운영시스템에 관한 연구 (A Study on the Unmanned convenience Store Operation System from the Viewpoint of Visual Merchandising)

  • 서정화;양회창;박철주;윤명길
    • 산경연구논집
    • /
    • 제9권12호
    • /
    • pp.45-53
    • /
    • 2018
  • Purpose - The purpose of the study was to investigate operation system of current convenience store and competing retail store and to find out development of unattended convenience store. Operators can save labor cost and solve labor seeking when opening shop under suitable environment and commerce area, and assure of employee's safety. Customers are allowed to select commodity comfortably without disclosure of face and to shorten standby time at simple store opening, buying and paying and to produce convenient living environment by financing, delivery and goods control. This study examined effect and problems of operation of existing and unattended convenience store from point of view of visual merchandising to find out model of unattended convenience store and to strengthen competitiveness of convenience store business. Research design, data, and methodology - Research procedure of accomplishment of goal of the study was: The study investigated state of distribution business, and role and definition of VMD. First, VMD played an important role of promotion and competitiveness of unattended convenience stores. Second, the author investigated research and cases of unattended convenience stores 14 months, that is to say, from August 15, 2017 to October 15, 2018. Third, the author investigated on-the-spot three of common convenience stores, three of unattended convenience stores and three of retailers one month, that is to say, June 1, 2018 to July 1, 2018. The subject was convenience stores and retailers selling similar type of products at Seoul and metropolitan area. Results - Layout, selling place, brand identity, goods assortment, authentication system, product information cognition and control, buying and payment system, security system, salesmen, promotion and other services should be improved from point of view of merchandising. Structure, furniture, lighting, voice, façade, VP, PP, IP and POP should be developed. Conclusions - Unattended convenience stores saved operating cost and lessened labor and gave visitors convenience and comfortable shopping and made use of resources effectively. Further studies with quantitative analysis shall find out strategic conditions for promotion of unattended convenience stores.

CNG 혼소율 변화에 따른 디젤엔진의 성능 및 연소 특성에 관한 연구 (A Study on the Performance and Combustion Characteristics with CNG Substitution Rate in a Diesel Engine)

  • 장형준;이선엽;김창기;조정권;임종한;윤준규
    • 한국산학기술학회논문지
    • /
    • 제18권5호
    • /
    • pp.700-707
    • /
    • 2017
  • 전 세계적으로 천연가스 시장에서는 천연가스의 저열량화 추세로 뚜렷하게 변화되고 있다. 이러한 추세는 국내의 천연가스 열량기준에 변화를 가져왔으며, 낮은 열량의 천연가스 도입으로 인해 현재 사용되고 있는 가스기기의 성능에도 변화가 있을 것으로 예측된다. 따라서 본 연구에서는 혼소엔진의 연소특성을 파악하기 위해 CNG 혼소율 변화를 이용하여 열효율, 도시평균유효압력 변동계수 및 열방출 특성을 고찰하였다. CNG 혼소율은 투입되는 연료의 총합 대비 공급되는 천연가스연료의 에너지로 계산하여 천연가스연료가 디젤연료를 대체하는 비율로 정의하였다. 엔진 실험조건으로는 공급되는 천연가스의 발열량은 $10,400kcal/Nm^3$이며, $1800rpm/500N{\cdot}m$의 엔진 운전조건에서 디젤연료의 분사시기는 BTDC $16^{\circ}CA$, 분사압력은 85 MPa로 설정하여 엔진의 성능 및 연소 실험을 진행하였다. 엔진 실험결과로 CNG 혼소율이 변화함에 따라 공급되는 디젤 연료량 역시 변화하고, CNG 혼소율이 증가할수록 디젤 연료량이 감소함으로써 점화에너지가 줄어들어 점화지연기간이 길어지는 연소특성을 나타내며, 이로 인해 엔진의 열효율과 출력도 감소하는 경향을 보였다. 그러나 연소안정성은 5% 미만으로 안정적인 엔진의 연소상태를 보여 실험의 신뢰성을 확보할 수 있었다.

빅 데이터와 클라우드 컴퓨팅 기반의 수자원 정보 관리 방안에 관한 검토 (A Review on the Management of Water Resources Information based on Big Data and Cloud Computing)

  • 김연수;강나래;정재원;김형수
    • 한국습지학회지
    • /
    • 제18권1호
    • /
    • pp.100-112
    • /
    • 2016
  • 최근 국내 외 수자원 정책의 방향은 전통적인 이 치수 부문과 함께 삶의 질을 향상을 위해 지속가능한 물 관리에 대한 필요가 강조되면서 수자원 정보의 수집, 관리 및 제공의 중요성이 증대되고 있다. 과거 수자원 정보는 제공하고자 하는 목적을 이미 정하고 거기에 맞도록 데이터를 효과적으로 분석하는 기술에 초점이 맞추어져 있었다. 그러나 최근에는 정형 데이터뿐만 아니라 비정형 데이터를 연계함으로써 새로운 가치를 도출할 수 있는 빅 데이터와 클라우드 컴퓨팅에 대한 관심이 부각되면서 수자원 정보에도 변화를 가져오고 있다. 이에 본 논문에서는 수자원 정보 관리의 패러다임 변화에 능동적으로 대처하고, 수자원 정보의 효율적인 관리 및 이용을 위해 수자원 분야에서 빅 데이터와 클라우드 컴퓨팅의 적용 방안을 검토 및 제언하고자 하였다. 국내외 수자원 정보 관리의 현황과 방향을 살펴보고, 빅 데이터의 3대 요소인 크기(Volume), 속도(Velocity), 다양성(Variety)과 함께 추가적으로 언급되고 있는 정확성(Veracity), 가치(Value)개념을 연계하였다. 그리고 클라우드 컴퓨팅을 통해 증가하는 수자원 관련 빅 데이터와 수요자의 변화에 대해 신속하고 유연한 대처방안에 대하여 논의하였다. 앞으로의 수자원 정보 관리는 정보의 크기(Volume), 속도(Velocity), 다양성(Variety) 등의 빅 데이터와 클라우드 컴퓨팅 적용을 통한 인명과 재산의 보호 등 공공의 목적, 물 관리 및 재난의 예방과 대응에 필요한 정확한(Veracity) 정보의 생산, 그리고 다른 분야와의 융합 등에 적극적으로 활용함으로써 수자원 정보의 가치(Value)를 높이는 방행으로 나아가야 한다.

변단면 압출추진코와 ILM 교량 상부단면의 상호작용 해석 (Interaction Analysis between Tapered Sectional Launching Nose and Superstructure Section of ILM Concrete Bridge)

  • 이환우;정두회;안태욱
    • 한국전산구조공학회논문집
    • /
    • 제19권2호
    • /
    • pp.139-150
    • /
    • 2006
  • ILM(incremental launching method) 교량공법은 품질확보에 효과적인 프리스트레스트 콘크리트 교량공법으로 인정받고 있다. 이 공법에 의해 시공되는 교량의 상부단면은 시공 중에 지간의 중앙부와 지점부에 일시적이나마 모두 위치하게 된다. 따라서 단면들은 자중에 의해 발생되는 최대 정 모멘트와 최대 부 모멘트, 그리고 최대 전단력을 모두 경험하게 되는 구조적 특성을 가지고 있다. 한편, 압출하는 동안 발생하는 높은 일시적 응력을 최소화하기 위해 일반적으로 압출추진코가 이용되고 있다. 그리고 상부단면에 발생하는 이 일시적인 응력의 크기는 압출추진코의 특성에 따라 달라진다. 본 연구에서는 압출 중 상부단면에 발생하는 단면력의 크기를 쉽고, 빠르게 검토할 수 있는 해석식을 유도하였다. 개발된 해석식에서 고려할 수 있는 매개변수로는 압출추진코와 상부단면과의 지간 길이비와 중량비 그리고 강성비를 택하였다 특히, 개발된 해석식에서는 변단면인 압출추진코의 단면형상과 다이아플램을 고려할 수 있다. 또한, 설계변수들에 대한 민감도 해석을 통하여 압출추진코와 상부단면의 상호작용에 미치는 매개변수들의 영향을 분석하였다.

온라인 쇼핑몰VMD에 대한 지각된 가치의 영향요인으로 소비자 조절초점 역할에 관한 연구 (A Study on Consumers' regulatory focus as a determinant of perceived value of online shopping mall VMD)

  • 서용한
    • 경영과정보연구
    • /
    • 제33권5호
    • /
    • pp.213-232
    • /
    • 2014
  • 의류제품 온라인쇼핑몰의 고객확보 경쟁이 날로 치열해 짐에 따라 쇼핑몰 재방문도에 영향을 미치는 요인에 대한 관심이 높아지고 있다. 쇼핑몰의 VMD는 소비자의 쇼핑몰 선택에 영향을 미치는 중요한 요인으로 평가되고 있다. 기존연구에서 VMD가 소비자 선택과 쇼핑경험에 미치는 영향은 규명되었지만, 소비자의 목적지향적 특성에 따라 소비행동(선택과 평가, 성과반응)에 어떤 차이를 보이는지에 대한 연구는 부족하였다. 일반적으로 소비자는 쇼핑몰이나 제품을 평가하고 선택할 때 다양한 전략을 사용한다. 소비자가 사용하는 전략과 개인적 목적지향 성향의 적합성에 따라 소비행동과 성과평가에 차이를 보일 가능성이 높다. 최근 이와 같은 개인특성을 설명하는 이론이 조절초점이론이다. 본 연구는 인터넷 쇼핑몰 상황에서 VMD 요소가 개인적 목적지향 성향인(조절초점)에 따라 소비자 반응(쇼핑몰 충성도)에 미치는 민감성에 차이가 있는지를 실증하였다. 실증연구는 두 개의 연구로 진행되었다. [연구 1]에서는 소비자의 초절초점이 온라인 쇼핑몰 VMD 요소의 평가에 차이가 있는지를 검정하였다. 분석결과, 향상초점 성향이 강한 소비자는 시각적요소와 엔터테인먼트 속성에 민감한 반면, 예방초점 소비자는 안전과 프라이버시 속성을 더 중요하게 생각하는 것으로 조사되었다. [연구 2]에서는 온라인 VMD의 지각된 가치가 충성도에 미치는 영향에 있어 소비자 조절초점의 조절효과를 검정하였다. 조절회귀분석을 실시한 결과, 향상초점 소비자는 쾌락적 가치가 충성도에 더 많은 영향을 미치는 반면, 예방초점 소비자는 실용적 속성이 충성도에 더 많은 영향을 미치는 것으로 나타났다.

  • PDF

유한요소 연계해석을 이용한 불포화 토사사면 안전성 평가 (Coupled Finite Element Analysis of Partially Saturated Soil Slope Stability)

  • 김재홍;임재성;박성완
    • 한국지반공학회논문집
    • /
    • 제30권4호
    • /
    • pp.35-45
    • /
    • 2014
  • 사면의 안정성을 위한 한계평형해석은 간편함과 적용성 때문에 가장 널리 적용되고 있다. 이러한 간편한 방법으로 균질하지 않고 방향성 있는 지층 같은 다양한 지형조건을 해석하기에는 신뢰성과 설득력 있는 결과를 주기에 한계가 있다. 또한 지반굴착과 성토지반 같은 토사사면의 초기 응력상태나 응력경로와 같은 지반의 응력변화에 대해서 고려하지 못한다. 반면, 한계평형해석과는 다르게, 유한요소법에 의한 변형과 응력분포 해석은 시간에 따른 복잡한 하중단계와 탄성영역외의 범위를 다룰 수 있다. 본 연구에서는 불포화 토사사면에서 발생하는 얕은 파괴의 안전율 계산과 임계단면을 결정하는 방법을 제안한다. 유한요소해석은 유효응력 거동을 근간으로 각 요소들의 가우스 포인트에서 응력들이 계산되고 안전율이 가장 약한 지점들을 찾아 비선형 임계단면이 결정된다. 이러한 사면안정해석은 강우침투에 의해 변형되는 지반의 사면 표층파괴에 적합하게 계산된다. 침투에 의한 지반의 단위중량의 변화는 사면의 연직 및 수평변위에 영향을 주며, Drucker-Prager 파괴기준은 수리학-역학적인 연계된 불포화토의 거동 해석과 응력-변형률 관계를 위해 적용된다.

동북아시아에서의 우주협력의 모색 (Groping for Cooperative Space Activities in the Northeast Asia)

  • 이상면
    • 항공우주정책ㆍ법학회지
    • /
    • 제22권1호
    • /
    • pp.75-103
    • /
    • 2007
  • 본 논문은 동북아시아에서의 우주협력에 장애가 되는 것을 극복하고자 정치적 상황을 검토함과 아울러 규범적인 체계의 수립에 대해서 검토하고자 한다. 그러한 협력의 장애가 되는 것중의 하나는 MTCR을 중심으로 하여 미국의 영향력 이라고 할 수 있다. 한국과 중국의 발사계약이 성사되지 않은 것도 그로 인한 것이었다. 중국이 MTCR 체제와 융합하는 것이 동북아시아에서의 우주협력을 활성화하기 위한 초석이 될 수도 있다. Helsinki 사례가 인권, 평화 및 환경 문제를 다루는 포괄적인 규범 체계를 제공하였듯이, 한반도의 안정과 평화를 둘러싸고 수립될 수 있는 동북아시아에서의 평화 체제가 우주부문에서의 협력과 같은 광범위한 문제를 다룰 수도 있을 것이다. 한국이 동북아시아지역에서 제3의 우주개발국가로서 성장하면 중국과 다른 열강과의 관계에 있어서 균형자로서의 역할을 할 수도 있을 것이다. 한국은 우주개발을 통해서 획득한 자료등을 아무런 정치적 이해 관계없이 주변국들과 공유하면서 우주협력을 이끌어낼 수도 있다. 일본이 주도하는 APRSAT가 재난방지위성시스템으로서 Sentinel을 제공하면서 주변 국가들의 협력을 이끌어 낸 것이 하나의 예가 될 수도 있다.

  • PDF

고강도 콘크리트의 부착거동에 관한 실험적 연구 (The Experimental Study on the Bond behavior of High strength concrete)

  • 이준구;김우;박광수;김대중;이응찬;김한중
    • 한국콘크리트학회:학술대회논문집
    • /
    • 한국콘크리트학회 1999년도 봄 학술발표회 논문집(I)
    • /
    • pp.774-780
    • /
    • 1999
  • The study of bond behavior between concrete and rebar has been performed for a long time. On this study, we tried to analysed variation of bond behaviors quantitatively with varying the strength of concrete. Bond stress which observed below the neutral surface of beam and at connecting part of beam and column is affected by various bond parameters. Resistance of deformed bars which embedded in concrete to the pullout force is divided 1) chemical adhesive force 2) frictional force 3) mechanical resistance of ribs to the concrete and these horizontal components of resistance is being bond strength. We selected the most common and typical variable which is concrete strength among various variables. So we used two kinds of concrete strength like as 25MPa(NSC) and 65MPa(HSC). Tension Test was performed to verify how bond behavior varied with two kinds of concrete strength. Concentration of bond stress was observed at load-end commonly in Tension Test of the initial load stage. At this stage stress distribution was almost coincident at each strength. As tension load added, this stress distribution had difference gradually and movement of pick point of bond stress to free-end and central section was observed. This tendency was observed at first and moving speed was more fast in NSC. At the preceeding result the reason of this phenomenon is considered to discretion of chemical adhesion and local failure of concrete around rebar in load-end direction. Especially, when concrete strength was increased 2.6 times in tension test, ultimate bond strength was increased 1.45 times. In most recent used building codes, bond strength is proportioned to sqare root of concrete compressive strength but comparison of normalized ultimate bond strength was considered that the higher concrete strength is, the lower safety factor of bond strength is in each strength if we use existing building codes. In Tension Test, in case of initial tensile force state, steel tensile stress of central cross section is not different greatly at each strength but tensile force increasing, that of central cross section in NSC was increased remarkably. Namely, tensile force which was shared in concrete in HSC was far greater than that of concrete in NSC at central section.

  • PDF