• Geomechanics and Engineering
• /
• 제1권1호
• /
• pp.85-96
• /
• 2009

The radius and coordinate of sliding circle are taken as searching variables in slope stability analysis. Genetic algorithm is applied for searching for critical factor of safety. In order to search for critical factor of safety in slope stability analysis efficiently and in a robust manner, some improvements for simple genetic algorithm are proposed. Taking the advantages of efficiency of neighbor-search of the simulated annealing and the robustness of genetic algorithm, a hybrid optimization method is presented. The numerical computation shows that the procedure can determine the minimal factor of safety and be applied to slopes with any geometry, layering, pore pressure and external load distribution. The comparisons demonstrate that the genetic algorithm provides a same solution when compared with elasto-plastic finite element program.

• 한국안전학회지
• /
• 제28권3호
• /
• pp.63-68
• /
• 2013

This paper is aimed to make an analysis on characteristics of the parallel arc waveform and RMS of current at the electrical tracking state by conductive powder. In order to achieve the goal in this paper, field state investigation at metal processing companies in Chung-Nam province area was conducted. With the field state investigation, conductive powder were collected from metal processing companies. By experiment on electrical connector(breaker, connector) over which the conductive powder were scattered, arc waveform and RMS of current were measured. The measured waveform and RMS(root-mean-square) of current were analyzed to describe characteristics and patterns of electrical arc by the conductive powder. It was proved that conductive powder on electrical connector can flow electrical current enough to make electrical fire with high thermal energy. Also the change of sine waveform and RMS of current can be used to find out relationship between electrical fire and fault signal by conductive powder. The results obtained in this paper will be very helpful for the prevention of electrical fires occurred at the metal processing companies.

• 한국환경보건학회지
• /
• 제40권5호
• /
• pp.413-424
• /
• 2014

Objectives: The purpose of this study was to seek measures for improvement and management of farm work safety and health by conducting questionnaire surveys and on-site investigations to ascertain the present state of occurrence of safety accidents and safety and health management levels among swine farmers. In particular, the purpose of this study is to provide basic data for the establishment of measures for the management of safety and health suitable to the characteristics of related working environments. Methods: Questionnaire surveys were conducted among 223 farmers engaged in swine farming in 14 regions, and 10 farms were visited in order to implement multilateral methods, including in-depth interviews, along with field surveys. Results: The surveys indicated that 26.2% of all respondents experienced farm-work related safety accidents and body-reaction related accidents showed a high ratio at 31.1% of all respondents. With regard to cause materials of safety accidents, work other than that directly related to swine raising showed high ratios of safety accidents, with pigsty facility related accidents at 26.6%. Although most workers recognized the dangers latent in the working environments, their behavior and responses to the prevention of safety accidents were still insufficient due to a lack of understanding of safety and health management. In the survey on the present state of personal hygiene and wearing of protective equipment, workers were found to have been exposed to dangerous and harmful environments both inside and outside pigsties, but the actual states of their wearing protective safety equipment were very poor. Conclusion: Given the results of this study, swine farmers well recognize problems in their control of safety accidents and management of safety and health, but their knowledge about safety and health education and management guidelines was insufficient. Therefore, safety and health education, public relations, and customized personal protective equipment suitable for swine raising work should be developed in order to address the foregoing problem.

• 대한안전경영과학회지
• /
• 제21권4호
• /
• pp.1-6
• /
• 2019

This study relates to acquiring biological signal without attaching directly to the user using UWB(Ultra Wide Band) radar. The collected information is the respiratory rate, heart rate, and the degree of movement during sleep, and this information is used to measure the sleep state. A breathing measurement algorithm and a sleep state detection algorithm were developed to graph the measured data. Information about the sleep state will be used as a personalized diagnosis by connecting with the medical institution and contribute to the prevention of sleep related diseases. In addition, biological signal will be linked to various sensors in the era of the 4th industrial revolution, leading to smart healthcare, which will make human life more enriching.

• Journal of Preventive Medicine and Public Health
• /
• 제55권3호
• /
• pp.289-296
• /
• 2022

Objectives: Integrating retail and manufacturing enables limitless potential for food businesses, but also creates challenges for navigating within complex food safety regulations. From public health inspectors' (PHIs) perspective, this study aimed (1) to describe the characteristics of crossover businesses in Louisiana, and (2) to evaluate regulation awareness and food safety education needs for business owners and PHIs who inspect crossover businesses. Methods: A self-administered questionnaire was administered to Louisiana Department of Health PHIs using Qualtrics^®. A descriptive analysis was performed, focusing on the frequency of each item. Results: In total, 1774 retailers were conducting or planned to conduct specialized processes, while 552 food manufacturers were performing or planned to perform retail functions. Reduced oxygen packaging, the use of additives such as vinegar as a method of preservation, and smoking food as a method of preservation were observed by 62%, 36%, and 35% of the PHIs, respectively. The PHIs perceived crossover businesses as "not aware" or "somewhat aware" of the food safety regulations. The current food safety training level for these businesses was reported to range from "no training" to "some training but not sufficient." When asked for a self-assessment, the majority of PHIs reported themselves as being "familiar" with the variance requirement for specialized processing. Their confidence in inspecting crossover businesses, however, leaned towards "not confident" or "somewhat confident." Conclusions: To better guard public health, food safety training is needed for crossover food business owners, as well as PHIs, on regulations and conducting or inspecting specialized processes.

• 국제초고층학회논문집
• /
• 제10권4호
• /
• pp.251-263
• /
• 2021

Fire safety engineering is a critical specialization to include in the design of a tall building yet is often excluded from the Building Information Model (BIM) and integrated design process. The design of fire safety systems is interdependent with building/structural geometry, HVAC, mechanical, and electrical systems. A BIM is a 3D visual representation that stores data on these kinds of systems. The compatibility between BIM and fire safety design seems obvious yet has received a dearth of attention in structural (fire) engineering literature. The authors herein have reviewed over 40 recent papers on utilizing BIM for fire safety engineering, focusing on contemporary literature to obtain a more up-to-date review of the state-of-the-art. The resulting trends, technologies, research gaps, and methodologies are presented in this paper. Adoption of BIM in fire safety engineering is slow and behind other disciplines which may be improved if research involved more industry partners. For BIM technology to reach its potential, industry manufacturers need to provide high LOD fire BIM objects, fire engineers and researchers need to collaborate on future advancements, and building owners/management need to be educated on how to use the benefits provided.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.309-314
• /
• 2007

Recently, the LRFD and the PSF based on structural reliability assessment have been applied to NPP designs in behalf of the conventional deterministic design methods. In the risk-informed structural integrity, it is especially possible to optimize design procedures considering cost, manufacturing and maintenance because the structural reliability concepts have confirmed the reliability for which a designer aims. Generally, in order to evaluate the PSF, the LRFD which is the design concept for evaluating safety factors respectively on the limit state function including load and resistance. This study certifies the concept and its applications of the PSF using the LRFD based on the structural reliability engineering.

• 기술사
• /
• 제34권3호
• /
• pp.33-40
• /
• 2001

Predict-Plan-Do is the main point to settle Safety management well, but we have neither Predict nor Plan. So just like the system of English CDM is necessary to be adapted in construction work which makes them work in full responsibility by clarifying the responsibility located step by step from planning to designing & constructing-To adapt this system needs more money for Safety than now, but this system makes companies earn maximum confidence & profit by accident prevention. Furthermore leads the nation and the society to earn large profit, then open the road to Welfare State. If you sees only the things such as money, profit, etc before your eyes, no more safety remains. That means no more respect of persons and no more welfare state.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 추계학술대회 논문집
• /
• pp.1913-1919
• /
• 2007

Substantive provisions of the concept of an estimation and safety of complex technical systems are envisaged. New problems are assume orientation to use of the formalized methods of an estimation of residual resources of reliability of objects, and also development of other methodological base in creation of complex technical systems that is connected with detailed elaboration of attention to a safety at all stages of creation of systems: from designing until operation. In this connection existing large objects should be provided by the developed systems of engineering monitoring and diagnostics.

• 한국안전학회지
• /
• 제26권2호
• /
• pp.6-12
• /
• 2011

The failure probabilities of pipes in nuclear power plants due to stress corrosion are obtained using the P-PIE program, which is developed for evaluating failure probability of pipes based on the existing PRAISE program. Leak, big leak and LOCA(loss of coolant accident) probabilities are calculated as a function of operating time for several pipes in a domestic nuclear plant. The sensitivity analysis is also performed to find out the important parameters for the failure of pipes due to stress corrosion. The results show that the steady state oxygen concentration and steady state temperature are important parameters and failure probability is very low when the oxygen concentration is maintained according to the regulation.