• Journal of the Korean Society of Safety
• /
• v.39 no.2
• /
• pp.44-53
• /
• 2024

In addition to being used for ascending and descending to work locations, portable ladders are widely used as a substitute for work platforms when working at heights in homes and industrial sites. However, accidents continue to occur in industrial sites owing to structural instabilities of ladders and the negligence of safety measures by users. To prevent accidents involving workers using portable ladders, it is important to encourage workers to use them correctly through laws and regulations; however, establishing effective preventive measures that go beyond regulations can increase acceptance in industrial sites and maximize the effect of reducing industrial accidents. Therefore, this study conducts a fact-finding survey and portable safety ladder product analysis and collects stakeholder opinions to develop a Korean-style safety ladder that can replace step ladders with a high risk of accidents.

• Journal of Korea Ship Safrty Technology Authority
• /
• s.31
• /
• pp.60-70
• /
• 2011

The slamming impact pressures at the bottom area of the Open60' are evaluated by the rules and regulations of various organizations - ISO and classification societies. The enhanced performance of the modern racing yacht in terms of speed which achieves well over 20 knots needs special consideration. The calculated design impact pressures are compared a experimental results. Severe difference can be found in these calculation results but the final conclusion shall be obtained after the scantling calculation under the evaluated design impact pressure so far.

• Proceedings of KOSOMES biannual meeting
• /
• 2005.11a
• /
• pp.91-110
• /
• 2005

Maritime terrorism at sea is the form of violent interference with shipping. Its global reach and negative impact on sea transportation, safety of navigation and marine environment, as well as the threat it poses to human lives and property, call for effective countermeasures at the international and national level at the same time. First, this paper gives a factual assessment of the phenomenon of maritime terrorism as well as a legal analysis of the international provisions to suppress such forms of violence at sea which is different from piracy. And also this paper attempts to address and identify issues relevant to the existing international regulations such as SUA Convention as the main source of international regulations applicable to acts of terrorism at sea, ISPS Code, PSI, etc. Finally this paper suggests the national countermeasures against maritime terrorism in light of above mentioned the definition, causes, types of maritime terrorism and concerning international regulations.

• Proceedings of the KSR Conference
• /
• 2005.05a
• /
• pp.211-219
• /
• 2005

The railway industry of each country has variant technical standards and regulations unlike other industries. For this reason, it is necessary to investigate the domestic technical standards and regulations and to prepare the countermeasure of the variance for advancing the korean high-speed railroad system into foreign market. This study was designed to investigate the railway design/manufacturing, examination/inspection and safety of domestic and foreign countries subject to a world market for advancing the korean high-speed railroad system into a foreign market. Because the reliance of a railroad system is a prerequisite for the safety of railroads, it is very important to obtain the reliance data, which is based on the RMS analysis of foreign countries subject to a world market.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1213-1220
• /
• 2008

In this study, the crashworthy design guidelines for the high speed EMU were derived and numerically evaluated. As for this high speed train, there are several different features from the KTX in that the conventional type bogies are adopted and the front end car (TC car) accommodates passengers. It is natural that the impact acceleration of the front end car should be controlled under the appropriate level stipulated at safety regulations for collision accidents. Also, car-to-car interfacing structures and devices should be deliberately designed to prevent overriding and telescoping mechanisms. As the first step for these design countermeasures, it was studied that how much impact energy should be absorbed at the energy absorbing zones and devices of each carbody to satisfy the impact acceleration regulations of the safety regulations. These results will be used as the crashworthy design guidelines for the high speed train in the next year research.

• Journal of Industrial Convergence
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2017

The purpose of this study is to analyze the facility standards of the elderly welfare facilities applying the seven principles of the universal design. The facility standards of the elderly welfare facilities were limited to the provisions of the "Enforcement Regulation of the Elderly Welfare Act". There are few legal regulations applying the universal design in the construction of the elderly welfare facilities. The facility standards are set only with the minimum requirements such as securing the safety of the user, securing the space area, functional convenience, and risk prevention. However, the contents of the regulations are limited to the minimum standards for functional convenience and safety required for living. In conclusion, in the elderly welfare facilities, the notion of universal design, which considers not only the elderly, but also service providers, employees, and general visitors, should be considered.

• Journal of the Korean Society of Safety
• /
• v.35 no.4
• /
• pp.15-22
• /
• 2020

Scaffolding works are demolished after this structure is completed, and safety accidents often occur because they are installed differently from legal standards or frequently change during work. Therefore, in order to strengthen the safety of scaffolding, the Ministry of Land, Infrastructure and Transport required a need for design standards for temporary facilities that can systematically prevent and solve large-scale safety accidents that are repeatedly increasing during temporary construction. It has been enacted, and some contents have been revised for the past three years. However, construction site personnel do not know or know the revised matters, but often install scaffolding by the installer's experience rather than complying with relevant laws and regulations. It is the situation that the ground strength test of the foundation ground for the load applied to the floor of the column is omitted in most sites. Therefore, this study grasped the actual situation on the degree of recognition of the revised laws and regulations of the construction site and the foundation-based treatment of the floor working load of the scaffolding column, and derived problems. In addition, we intend to provide reference materials for the endurance test according to the ground conditions to small-scale small sites where it is difficult to conduct the test by carrying out the endurance test of the scaffolding ground according to the revised standards.

• Proceedings of the KSR Conference
• /
• 2005.11a
• /
• pp.599-604
• /
• 2005

As a public transportation possible to convey a large quantity, the railway is safe and keeps time, but it has hazards to cause a disaster if the accidents such as collision, derailment, and fire occur. So advanced countries carry out System Safety Plan with various program activities which have connected orders to maintain or improve safety level by finding hazards, evaluation, taking measures and practice, and improving problems. Especially they systematically manage hazards to cause railway accidents and the factors which possibly threat safety, using national classification of risk and causes with analysis of the related data such as establishing accident/incident data and safety regulations/standards. As executing railway safety regulations, domestic railway is currently trying to improve railway safety management system. The research of classification system of accidents/incidents is one thing to make railway safety management systems better. In this research, we reviewed hazardous factors of railway systems and classification of the causes as the beginning of system safety management, and we conducted study on development of railway accident classification based on findings of this research. The results are able to be used in identifying hazards and activities of systemic safety management at the step of railway accident report and investigation.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.313-316
• /
• 2015

Construction is one of the most dangerous job sectors, which reports tens of thousands of time-loss injuries and deaths every year. These disasters incur delays and additional costs to the projects. The safety management needs to be on the top primary tasks throughout the construction to avoid fatal accidents and to foster safe working environments. One of the safety regulations that are frequently violated is the wearing of personal protection equipment (PPE). In order to facilitate monitoring of the compliance of the PPE wearing regulations, this paper proposes a vision based method that automatically identifies whether workers wear hard hats and safety vests. The method involves three modules - human body detection, identification of safety vest wearing, and hard hat detection. First, human bodies are detected in the video frames captured by real-time on-site construction cameras. The detected human bodies are classified into with/without wearing safety vests based on the color features of their upper parts. Finally, hard hats are detected on the nearby regions of the detected human bodies and the locations of the detected hard hats and human bodies are correlated to reveal their corresponding matches. In this way, the proposed method provides any appearance of the workers without wearing hard hats or safety vests. The method has been tested on onsite videos and the results signify its potential to facilitate site safety monitoring.

• Journal of Preventive Medicine and Public Health
• /
• v.55 no.3
• /
• pp.289-296
• /
• 2022

Objectives: Integrating retail and manufacturing enables limitless potential for food businesses, but also creates challenges for navigating within complex food safety regulations. From public health inspectors' (PHIs) perspective, this study aimed (1) to describe the characteristics of crossover businesses in Louisiana, and (2) to evaluate regulation awareness and food safety education needs for business owners and PHIs who inspect crossover businesses. Methods: A self-administered questionnaire was administered to Louisiana Department of Health PHIs using Qualtrics^®. A descriptive analysis was performed, focusing on the frequency of each item. Results: In total, 1774 retailers were conducting or planned to conduct specialized processes, while 552 food manufacturers were performing or planned to perform retail functions. Reduced oxygen packaging, the use of additives such as vinegar as a method of preservation, and smoking food as a method of preservation were observed by 62%, 36%, and 35% of the PHIs, respectively. The PHIs perceived crossover businesses as "not aware" or "somewhat aware" of the food safety regulations. The current food safety training level for these businesses was reported to range from "no training" to "some training but not sufficient." When asked for a self-assessment, the majority of PHIs reported themselves as being "familiar" with the variance requirement for specialized processing. Their confidence in inspecting crossover businesses, however, leaned towards "not confident" or "somewhat confident." Conclusions: To better guard public health, food safety training is needed for crossover food business owners, as well as PHIs, on regulations and conducting or inspecting specialized processes.