• Journal of Fashion Business
• /
• v.26 no.6
• /
• pp.105-115
• /
• 2022

Wearing a mask is still advised since COVID-19 continues to spread. However, masks may also irritate the skin and cause mask acne, often known as "maskne", which is a type of acne mechanica caused by friction between the skin and clothing. Therefore, there is a need to develop an effective maskne cosmetic. In this study, we made the maskne cosmetics containing humulus lupulus extract and copper tripeptide-1 and investigated its stability and safety. To measure stability, a centrifugation test and heat-cool cycling were done, and changes in viscosity and pH were measured for 8 weeks. The Cumulative Irritation Test (CIT, WKIRB-202111-HR-096) was performed and positive reactions were determined by the ICDRG criteria. The results indicated that the samples were stable after centrifugation, temperature cycling, viscosity, and pH tests. In addition, cosmetic safety test results revealed that maskne cosmetics containing humulus lupulus extract and copper tripeptide-1 did not cause any skin responses. These findings indicate that prepared maskne cosmetics' stability and safety were comparable to those of currently available commercial cosmetics.

• Journal of Korean Society of Transportation
• /
• v.33 no.4
• /
• pp.323-336
• /
• 2015

Estimating the risks on the roadway using surrogate safety measures (SSM) has an advantage in that it focuses on the vehicle trajectory directly involved in conflicts. On the other hand, there is a restriction on estimating the risks of continuous segments due to the limited data collected from a location. To overcome the restriction, this study presents the scheme of acquiring the vehicular trajectory using real time kinematics-differential global positioning system (RTK-DGPS) and develops a methodology which contains the considerations of the problems to calculate the SSM such as time-to-collision (TTC), deceleration rate to avoid collision (DRAC) and acceleration noise (AN). By using the methodology, this study shows a result from an experiment executed in a section where the variation of vehicular movement can be observed from several continuous flow roadway sections near Seoul and Gyeonggi Province in Korea. The result illustrated the risks on the roadway by the SSM metrics in certain situations like merging and diverging, stop-and-go, and weaving. This study would be applied to relate the dangers with characteristics of drivers and roadway sections, and prevenst accidents or conflicts by detecting dangerous roadway sections and drivers' behaviors. This study contributes to improving roadway safety and reducing car-accidents.

• Journal of the Korean Society of Safety
• /
• v.33 no.5
• /
• pp.84-91
• /
• 2018

Despite the government 's efforts to reduce constructional disasters, it has been pointed out that the safety management cost of the Construction Technology Promotion Act does not reflect the actual site. Therefore, it is necessary to study the proper guideline of the safety management cost which can be used as the most fundamental measure to prevent construction accidents. Moreover for the securement of the reasonable safety management costs, it is important to calculate its appropriate rate. Thus, in this study, the appropriate rate of safety management cost was proposed by the construction cost & type based on the 111 execution plans of safety management cost, and the rate is analyzed to be 1/10 of the occupational safety and health management cost. The results of this study will be a guideline in improvement to the proper schedule rating system improvement and in implement of pilot projects.

• Geomechanics and Engineering
• /
• v.5 no.5
• /
• pp.485-497
• /
• 2013

The factor of safety is the most common measure of the safety margin for slopes. When the traditionally defined factor is used in kinematic approach of limit analysis, calculations can become elaborate, and iterative methods have to be used. To avoid this inconvenience, the safety factor was defined in terms of the work rates that are part of the work balance equation used in limit analysis. It was demonstrated for two simple slopes that the safety factors calculated according to the new definition fall close to those calculated using the traditional definition. Statistical analysis was carried out to find out whether, given normal distribution of the strength parameters, the distribution of the safety factor can be approximated with a well-defined probability density function. Knowing this function would make it convenient to calculate the probability of failure. The results indicated that the normal distribution could be used for low internal friction angle (up to about $16^{\circ}$) and the Johnson distribution could be used for larger angles ${\phi}$. The data limited to two simple slopes, however, does not allow assuming these distributions a priori for other slopes.

• Journal of The Korean Society of Integrative Medicine
• /
• v.4 no.3
• /
• pp.81-91
• /
• 2016

Purpose : This study is conducted to analyze the safe awarenece, its related health education and the employee's requirements in a prime supplier and its subcontractor company, suggesting the proper measure in employee education program. Method : The employees of 'S' construction company and its subcontractor are surveyed during the period of April 15 from May 15 in 2016. The 324 questionnaires are statistically analyzed with the version 21.0 of SPSS. The general characteristics were calculated through the frequency analysis and descriptive statistics. The difference in safe consciousness between prime and subcontractor employee group was analyzed using t-test. Result : The statistics shows the employees in the prime company tend to observe the safe rules rather than the subcontractor employees(p<.005), but the latter are more conscious of safety in working environment than the former(p<.005). In addition, the subcontractor company did not provide his employees with the site for the safety-health education. Conclusion : The small-sized subcontractor company should identify its employees' requirements and supplement the lack of the safety and health education for the prevention of the industrial disasters. In details, the hand-on and practice-oriented leaning and teaching program development are suggested.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.67 no.8
• /
• pp.1106-1112
• /
• 2018

In this paper, measurement techniques are presented to test the performance of insulation without interruption if it is difficult to measure insulation resistance. Especially, non-contact voltage phase detection techniques have been developed that can be applied in environments where it is difficult to find voltage measurement locations such as component receptors. The performance verification of the non-interrupting insulation resistance measuring devices has been tested against existing products using standard calibration equipment and test jigs. The validation confirmed performance within 2 % for direct contact type and within 10 % for non-contact type. In addition, the procedure to make continuous insulation test using the equipment was proposed.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.29 no.4
• /
• pp.37-44
• /
• 2021

In case of South Korea, the airspace which airlines can operate is extremely limited due to the military operational area located within the Incheon flight information region. As a result, safety problems such as mid-air collision between aircraft or Traffic alert and Collision Avoidance System Resolution Advisory (TCAS RA) may occur with higher probability than in wider airspace. In order to prevent such safety problems, an mid-air collision risk detection model based on Detect-And-Avoid (DAA) well clear metrics is investigated. The model calculates the risk of mid-air collision between aircraft using aircraft trajectory data. In this paper, the practical use of DAA well clear metrics based model has been validated. Aviation safety data such as aviation safety mandatory report and Automatic Dependent Surveillance Broadcast is used to measure the performance of the model. The attributes of individual aircraft track data is analyzed to correct the threshold of each parameter of the model.

• Journal of Hydrogen and New Energy
• /
• v.33 no.6
• /
• pp.692-698
• /
• 2022

With the expansion of domestic hydrogen fuelling station infrastructure, it is necessary to secure reliability among hydrogen traders, and for this, technology to accurately measure hydrogen is important. In this study, 4 types of hydrogen trading volume calculation models (model 1-4) were presented to improve the accuracy of the hydrogen trading volume. In order to obtain the reference value of model 4, and experiment was conducted using a flow rate measurement equipment, and the error rate of the calculated value for each model was compared and analyzed. As a result, model 1 had the lowest metering accuracy, model 2 had the second highest metering accuracy and model 3 had the highest metering accuracy until a certain point. But after the point, model 2 had the highest metering accuracy and model 3 had the second metering accuracy.

• Journal of Advanced Navigation Technology
• /
• v.25 no.6
• /
• pp.456-465
• /
• 2021

For predictive aviation safety management, the establishment of safety performance indicators to measure and manage the safety performance of service providers must be preceded. In particular, leading indicators are significant in that they play an important role in identifying and managing the causes of accident/incident in advance. However, the current safety performance indicators of the domestic aviation industry have limitations in that they focus on lagging indicators based on events that have already occurred. Therefore, the purpose of this study is to construct Korean leading indicators for preventive safety management. In addition, we verify the validity and importance of the indicators based on review of the experts and AHP analysis. This study is meaningful in that it can support the proactive safety management of the domestic aviation industry through the development of leading safety indicators, which have been relatively lacking in research.

• The Journal of Society for e-Business Studies
• /
• v.24 no.4
• /
• pp.31-48
• /
• 2019

To survive in the trend of the fourth industrial revolution, companies are putting a lot of attention and effort into personalization services using the latest technologies such as big data, artificial intelligence and the Internet of Things, while entrusting third parties to handle personal information on the grounds of work efficiency, expertise and cost reduction. In such an environment, consignors need to check trustees on a more effective and reasonable basis to ensure personal information safety for trustees. This study used AHP techniques to derive the importance and priority of each item of "Personal Information Safety Assurance Measures" for financial companies and trustees, and objectively compared and analyzed differences in perceptions of importance between financial institutions and trustees. Based on this, the company recognizes the difference between self-inspection of financial institutions and inspection of trustees and presents policy grounds and implications for applying differentiated inspection standards that reflect the weights appropriate for the purpose.