• Journal of the Korean Society of Safety
• /
• v.27 no.2
• /
• pp.127-133
• /
• 2012

This paper shows survey result on safety management status of laboratories in Korea. In Korea, many studies and reports on laboratory safety have been published since the ministry of education, science and technology (MEST) enforced the Act on Establishing a Safe Environment of Laboratories (Lab Safety Act) in 2006. The MEST has surveyed status of safety management in institutions subject to Lab Safety Act in 2008 and 2010. According to the survey result, safety management status of universities and colleges has been improved on several factors such as establishment of safety manual and implementation of safety inspection; while the number of safety managers of universities and colleges have increased. However, the difficulties in performing duties of safety managers has increased because the number of exclusive safety managers has decreased. This paper identifies the similarities and differences between Occupational Safety and Health Act and Lab Safety Act on assignment and duties of safety managers; therefore, this paper suggests a standard to determine the number of safety managers and decide whether or not their duties should be exclusive. Besides current standard that is based on the number of researchers, the number of individual laboratories should be considered. The new method would be helpful to determine the number of exclusive safety managers because the amount of safety managers' duties generally do not depend on only the number of people who may be exposed to any risk but also the number of facilities that may be cause of any accident.

• Journal of the Korean GEO-environmental Society
• /
• v.16 no.7
• /
• pp.43-53
• /
• 2015

More than 70 percent of the Korean territory consists of mountain area so development of mountain district is essential to urbanize continuously. Thus, technological developments for risk factors and standards and manuals must be needed to prevent mountain disaster. Risk Management Manual should be made and operated in government legislation related to national disaster, but there is still no Emergency Management Standard Manual and Emergency Response-Practical Manual to prevent mountain disaster. This study suggests the improvement plans that are legislated but not established cleary in the field of disaster in urban area. The main items are like as 1) adaptable standard and practical manual to prevent mountain disaster in urban area, 2) reinforcement between managing department and interagency vertically and horizontally in central and local government organization, 3) Personal SOP (Standard Operating Procedure) not EOP (Emergency Operation Plan), 4) considering 13 items selected by Ministry of Public Safety and Security, 5) schematization with personal action plan, 6) check list to do in the event of mountain disaster, and 7) regular practice per quarter.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.418-426
• /
• 2021

This study investigates the perception of radiation safety management in radiation generator manufacturing workers and medical institutions. The basic data obtained is further applied to improve active coping ability and safety levels. The knowledge and attitude practice score of radiation was found to be related to gender, age, marital status, occupation, position, current work period, total work period, radiation related work period, the manual available, defense facility maintenance, number of defense equipment, radiation safety education, special health examination, and recognition of radiation terms. In particular, the knowledge score of radiologists was highest among the radiation-related occupations (<0.05). Radiation safety management requires active defense endeavors to prevent radiation exposure, by both workers of radiation manufacturers and medical institutions. Moreover, institutional devices such as compliance with guidelines, periodic education, facility reinforcement, manual preparation, and special health checkups are required for efficient radiation safety management.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.4
• /
• pp.325-341
• /
• 2017

Objective: The purpose of this study is to suggest the guidelines of operation phases to minimize injuries and musculoskeletal disorders in manual material handling (MMH) tasks through literature reviews. The guidelines are presented as the preparing phase, lifting phase, carrying phase, and lowering phase. Also, we summarized the non-numerical general guidelines for MMH tasks. Background: Manual material handling is still a main cause to musculoskeletal disorders. Method: Procedures of a literature review are classified into database selection, keyword search, title review, abstract review related to literature selection, guideline review and arrangement. A total 48 papers and books were analyzed in detail by title and abstract reviews. Results: In the preparing phase, we suggested the basic conditions in MMH, preparing procedure, clothing and protective equipment, and education. In the lifting and carrying phases, we recommended maximal acceptable weight by frequency and body posture. In the lowering phase, we suggested the lowest weight and safety body postures. Finally, we recommended general guidelines and guideline items for MMH. General guidelines are presented to suggest worker selection, technical education, and work design parts. Conclusion: We suggested the guidelines on the four operation phases of MMH tasks such as preparing, lifting, carrying, and lowering phases. Application: The findings of this study can be utilized as guidelines for proactive recommendations according to workers in MMH tasks.

• Korean Journal of Construction Engineering and Management
• /
• v.19 no.6
• /
• pp.94-102
• /
• 2018

Recently, there is a growing need to review compliance with legal requirements to ensure fire safety as the number of fires caused by noncompliant fire safety facilities in high-rise buildings has increased. While there are a large number of apartment buildings in Korea, there is a lack of review on fire safety facilities' compliance with fire safety requirements. The reason for this lack of review despite apartment buildings causing deaths due to their structural features in the event of a fire, lies in the misinterpretation of legal provisions as the Building Act and the Fire Services Act are mixed up; a final inspection when fire safety facilities are unnecessarily installed or missing could result in significant losses in terms of finances and time. Therefore, this study developed a checklist that makes it possible to review mixed-up legal requirements for fire safety facilities simultaneously, and examined the importance and current level of each item through IPA (Importance Performance Analysis). Based on these results, this study intends to develop a manual that considers its applicability to construction practices and contribute to reducing construction companies' fire safety inspection risks.

• Korean Journal of Construction Engineering and Management
• /
• v.13 no.3
• /
• pp.143-151
• /
• 2012

The facility safety management in Korea does not secure efficiency as a safety management that is not constructed a maintenance manual. As such, disaster dangerous facilities are at a great danger for disaster occurrence. Accordingly, this study introduced revised requirement and revised level of requirement to field attendants to explore domestic facility safety management system, and set up and suggested a revised plan through brainstorming and attendants of central management institutions. This study is of importance that it reflects field attendants and attendants of central management institutions, suggests specific alternatives for realization to improve national level of institutional improvement.

• International conference on construction engineering and project management
• /
• 2013.01a
• /
• pp.60-65
• /
• 2013

Introducing the concept of construction safety in the design/engineering phase can improve the efficiency and effectiveness of safety management on construction sites. In this sense, further improvements for safety can be made in the design/engineering phase through the development of (1) an automated hazard identification process that is little dependent on user knowledge, (2) an automated construction schedule generation to accommodate varying hazard information over time, and (3) a visual representation of the results that is easy to understand. In this paper, we formulate an automated hazard identification framework for construction safety by extracting hazard information from related regulations to eliminate human interventions, and by utilizing a visualization technique in order to enhance users' understanding on hazard information. First, the hazard information is automatically extracted from textual safety and health regulations (i.e., Occupational Safety Health Administration (OSHA) Standards) by using natural language processing (NLP) techniques without users' interpretations. Next, scheduling and sequencing of the construction activities are automatically generated with regard to the 3D building model. Then, the extracted hazard information is integrated into the geometry data of construction elements in the industry foundation class (IFC) building model using a conformity-checking algorithm within the open source 3D computer graphics software. Preliminary results demonstrate that this approach is advantageous in that it can be used in the design/engineering phases of construction without the manual interpretation of safety experts, facilitating the designers' and engineers' proactive consideration for improving safety management.

• Journal of the Korean Society of Safety
• /
• v.21 no.3 s.75
• /
• pp.127-136
• /
• 2006

In 2002 Product Liability Act newly got into effect in Korea so that efforts for Product Safety got a new chance to promote safety standardization. Under the supervision of the Korean Agency for Technology and Standards (ATS) and the Korea Standards Association (KSA), the enterprise titled "Standardization of Product Safety" took the first step in 2000. Thenceforth a lot of standards and guidelines for product safety have been developed. The results of the enterprise were in the type of technical manual as well as report, technical guidelines, and specific technical safety standards. In this paper, the authors narrated those sequential efforts for Product Safety, and introduced the basic concept on which standardization of Product Safety Management System was conducted and individual safety standard has been developed. Based on this systematic concept, a global road-map as well as specific road-maps for developing safety standards in individual industry were supplied. Finally, suggestions for proceeding to the whole risk management system including other risky factors were appended.

• Journal of the Korea Safety Management & Science
• /
• v.20 no.1
• /
• pp.11-21
• /
• 2018

Safety accidents, which are called industrial accidents in construction work, are often caused by unstable physical and personal conditions combined during preparation and execution of work. It is difficult to manage all the construction works, but especially in the field of apartment construction work, complex and many kinds of works are being carried out at the same time. In the current construction, safety regulations such as safety management guidelines are generally well maintained, but the execution of manpower resources that can fulfill them is limited, and it is difficult to reduce the accident rate and loss cost. Therefore, in this study, it is a reality that most of the types of construction work are under contruction by subcontracting contract, so they are limit by methods of manual maintenance and safety education. Currently, the subcontractor is also allowed to perform safety management through the composition of the safety management review body, but it is operated formally. So alternatives to this were studied. As a result, safety accidents occur in the subcontractor's worker due to vertical integration, which is characteristic of the construction industry, together to the contractor, the safety management system is based on a safety construction system in which a worker who has a certain qualification condition such as career experience of the work type, work understanding of the work type, and management experience of the work type among the subcontractor, when we manage based on mutual personality which is the personality of interpersonal relationship that can communicate with each other by work type, process and grouping, it is concluded that effective and practical safety management can be achieved to reduce the accident rate and loss cost.

• Fire Science and Engineering
• /
• v.31 no.2
• /
• pp.61-73
• /
• 2017

The Fukushima Nuclear Disaster in 2011 and California Power Failure in 2001 are examples of the importance of the power plant safety management that caused huge national loss with a power-related mass casualty incident. In a situation where humans cannot live without electricity, efforts to strengthen the systematic firefighting safety management in power plants that produce electricity with large amounts of hazardous materials as fuel, such as nuclear energy, coal and gas, are essential to protect life and prevent property loss and stable economic growth from fire explosion accident or radiation leak due to the negligence of safety management and natural disasters such as earthquakes, which has recently become an issue. This study examined the operating situation of firefighting safety management in power plants with firefighting officials employed by five power generation companies including Korea Southern Power Co., Ltd. and Korea Hydro & Nuclear Power Co. Ltd., which are in charge of the domestic power supply. As a result, for the systematic firefighting safety management of power plants, improvement plans were drawn, including the development of an effective business manual and a comprehensive management system, the substantiality of firefighting safety education, and the strengthening of seismic designs to prepare for earthquakes.