• 한국항행학회논문지
• /
• 제21권1호
• /
• pp.50-57
• /
• 2017

최근 국내에서 추진된 항공 관련 안전필수시스템 기술 개발 사업들이 중도에 종료되거나 최종 단계에서 실용화되지 못하는 사례가 종종 발생했다. 사업실패의 원인은 여러 가지 요인이 있겠지만 본 연구에서는 불완전한 시험평가 절차에 주안점을 두고 관련 연구를 수행하였다. 일반적으로 안전필수시스템의 시험평가 프로세스는 시스템의 전 수명주기에 걸쳐 분포되고 단계별 연속성을 가져야 하며 시스템 설계 및 획득 전략의 성숙도에 따라 다양한 방법으로 실행될 수 있다. 본 논문의 목적은 국내 안전필수 항행시스템 개발 사업의 리스크를 줄이고 성공률을 높이기 위한 방안으로 국내외 시험평가 프로세스를 분석하여 새로운 전략을 제시하는 것이다. 먼저 안전필수시스템에 대한 검증 및 확인 기법에 대해 토의하고 선진기관의 시험평가 프로세스 및 절차와 국내 현황을 분석한 뒤 국내외 시험평가 프로세스를 비교함으로써 불완전한 시험평가 절차에 대한 보완책을 제시하였다.

• 대한의생명과학회지
• /
• 제23권3호
• /
• pp.155-160
• /
• 2017

Biomedical laboratory is full of risks. Risk could be biological, chemical, radioactive, mechanical, physical, fire and electrical. All possible risks need to be identified, evaluated and controlled. A risk management system must be in place to prevent accident or loss of lives and to improve overall workplace safety and productivity. Safety in laboratory is a combination of appropriate risk management system, engineering controls and technical facilities, administrative controls and safety procedures and practices. Laboratory safety culture must be developed so that exposure to hazards for laboratory personnel, community and environment will be minimized or eliminated. In this review, importance of safety in a biomedical laboratory and risk management will be discussed.

• 한국항해항만학회지
• /
• 제38권3호
• /
• pp.203-209
• /
• 2014

As a sense of practical field, most researchers emphasize the importance of safety management to prevent marine accidents. The purpose of this paper is to develope a new safety evaluation method using Safety Index (SI) which is to measure the emotional feeling of navigation officer by traffic situations. In this study, the questionnaires with SI are used to investigate the degree of sensing levels of navigation officers according to the navigation situations. In addition, the traffic data obtained from AIS (Automatic Identification System) data are used to give actual situations in the questionnaire investigation. As results of questionaries investigations based upon the AIS data, it is shown that the Safety Index can be used as a criterion to determine the safety levels of ship navigating in a coastal areas.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2006년도 추계공동학술대회
• /
• pp.287-292
• /
• 2006

Reducing the logistic cost may be accomplished by numbers of logistic management methods, but the most fundamental and essential one is the accomplishment of the consistent reverse logistics system that is the core of worker performance system, and the purpose of consistent reverse system is the treatment of logistic functions such as transportation, storage and unloading with consistent logistics, and increasing the turnover ratio is required for the improvement of the system. As the turnover ratios is increased, this paper make reverse worker performance evaluation system with lifetime value include of weight variables.

• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2013년 춘계학술대회
• /
• pp.271-284
• /
• 2013

최근 현대 무기체계는 최첨단 기술로 인한 무기체계 개발 속도 증가와 획득환경의 다변화와 더불어 이에 대한 위험도 동시에 증가하고 있다. 이에 따라 미국방부는 무기체계의 수명주기를 고려하여 시험평가를 지속 적용토록 강조하고 있다. 따라서 기존의 무기체계 시험평가 프로세스에서 다루는 시스템 설계에 대한 단계별 안전 활동의 강화의 필요성 역시 강조되고 있다. 그 중에서도 무기체계 개발의 핵심 활동에 해당하는 체계개발 단계는 양산에 들어가기 전의 최종 활동으로서 제대로 수행되어야만 초기에 의도한 무기체계 개발의 목적을 달성할 수 있을 것이다. 본 논문에서는 시스템 안전성 요소를 고려한 시험평가 프로세스의 개선사항 도출과 모델링을 통해 무기체계 시스템인 무기체계를 대상으로 적용 및 조정 구축에 대한 내용을 기술하고 있다. 본 연구의 결과를 토대로 향후 시험평가 기간의 단축 및 비용 절감과 데이터의 관리 및 추적 기능을 개선함으로써 무기체계 개발 후의 안전사고 발생 가능성을 줄일 수 있을 것으로 기대된다.

• 대한안전경영과학회지
• /
• 제18권3호
• /
• pp.17-24
• /
• 2016

The regulation for industrial accident rate level assessment of construction companies was introduced to the construction industry in the Republic of Korea since 1993 and has brought positive outcome on industrial accidents reduction at construction work sites. There were considerable decrease of industrial accident ratio and enforcing of contrators' safety organizations from the beginning of the regulation for industrial accident rate level assessment. In spite of these positive outcomes, there were some negative effects such as contractors' shrinking accident reports to keep good accident ratios since these figures had a great impact on pre-qualification stage of bidding when general contractors were competing for new construction projects. In addition, Comprehensive evaluation bid system, which replaces the lowest price bid system is applied to government-ordered construction projects since 2016. Comprehensive evaluation bid system includes construction company's accident rate as one of the evaluation items and carries out with the industrial accident rate level assessment of construction companies at the same time. The regulations of two systems have been called for improvement to unify these different procedures and standards which have led business stakeholders to confusion for several years. This study aims to devote on lessening shrinking accident reports and to reduce the waste of business stakeholders through changing the regulation for industrial accident rate level assessment.

• 대한안전경영과학회지
• /
• 제4권4호
• /
• pp.1-14
• /
• 2002

As domestic buildings have been large-scaled, diversified and high-rise, there have been a consistent demand for design, development of construction technology and accident prevention activity as well as quality enhancement. In spite of governmental and related institutions' efforts for reducing national losses which come from numerous accidents, there have been endless small and large accidents on the construction site and thus, it is urgent to conduct empirical researches in this area. Currently safety supervision system in construction industry has enforced harm and danger prevention planning system, however it merely stick to other existing materials. In addition, it is difficult to put it into practice in that it requires bearing too much burden to draw out the planning itself in a case of large construction work. Consequently in this paper we select evaluation criteria by construction progress, classify into several categories, and regard potential danger which often occurs, as a evaluation criterion. Further step is to allow workers or collaborated companies to express their expert opinions or experiences and to encourage quality and process control and autonomous safety control by applying PSM method. The reason why PSM method should be quantitative and substantial progress is because it contributes Korean constructing companies to enhancing their safety control ability and to taking an equal stance just like developed countries,' thereby strengthening there competitive edges. Boost of safety control system by PSM method will make an enormous contribution to preventing construction accidents on the site by establishing and securing an autonomous safety control system.

• 품질경영학회지
• /
• 제41권4호
• /
• pp.725-735
• /
• 2013

Purpose: The purpose of this study is to propose an Integrated Safety Evaluation Process (ISEP) that can enhances the safety aspect of the safety-critical system. This process utilizes the advantages of the iterative Systems Engineering process combined with the safety assessment process that is commonly and well defined in many standards and/or guidelines for railway, aerospace, and other safety-critical systems. Methods: The proposed process model is based on the predefined system lifecycle, in each phase of which the appropriate safety assessment activities and the safety data are identified. The interfaces between Systems Engineering process and the safety assessment process are identified before the two processes are integrated. For the integration, the elements at lower level of Systems Engineering process are combined with the relevant elements of safety assessment process. This combined process model is represented as Enhanced Functional Flow Block Diagram (EFFBD) by using CORE(R) that is commercial modelling tool. Results: The proposed model is applied to the lifecycle and management process of the United States aircraft system. The US aircraft systems engineering process are composed of twelve key elements, among which the requirements management, functional analysis, and Synthesis processes are considered for examplenary application of the proposed process. To synchronize the Systems Engineering process and the safety assessment process, the Systems Engineering milestones are utilized, where the US aircraft system has thirteen milestones. Taking into account of the nine steps in the maturity level, the integrated process models are proposed in some phases of lifecycle. The flows of processes are simulated using CORE(R), confirming the flows are timelined without any conflict between the Systems Engineering process and the safety assessment process. Conclusion: ISEP allows the timeline analysis for identifying activity and data flows. Also, the use of CORE(R) is shown to be effective in the management and change of process data, which helps for the ISEP to apply for the development of safety critical system. In this study, only the first few phases of lifecyle are considered, however, the implementation through operation phases can be revised by combining the elements of safety activities regarding those phases.

• 대한안전경영과학회지
• /
• 제16권1호
• /
• pp.21-27
• /
• 2014

In this paper, a research was carried out to extract the more concrete and systematic method for the safety management of skyscraper construction. Here, the most risky processes in the construction of skyscrapers were extracted through the general risk evaluation for safety management processes and their characteristics and trends were analyzed for the suggestion of safety management methods and safety inspection factors in the construction of skyscrapers, as well as for the suggestion of prevention measures for major disasters. The result of this paper will be well used as a basic data in establishing the manual necessary for executing the construction of skyscrapers more safely than the present where there is no specific direction for the safe management of skyscraper construction yet.

• 한국항공운항학회지
• /
• 제18권2호
• /
• pp.54-59
• /
• 2010

The flight deck crew must manage complexity during daily flight operations. The Airline may obtain data regarding threats and errors through LOSA(Line Operations Safety Audits) on normal flights as predictive safety tool in Safety Management System of the Airline to actively improve the systems such as SOP(Standard Operation Procedure), training, evaluation and the TEM(Threat and Error Management) for the flight deck crew. The flight deck crew make errors when they fail managing threats. The crew mismanage around ten percent of threats and commit errors. The major mismanaged threats are aircraft malfunction, ATC(Air Traffic Communication), and wether threats. The effective countermeasures of TEM for manageing threats are leadership, workload management, monitor & cross check, Vigilance, communication environment and cooperation of the crew. It is important that organizations must monitor for the hazards of threats and improve system for the safer TEM environments.