• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.1
• /
• pp.47-52
• /
• 2008

The visual implementation of 3-dimensional national environment is focused by the requirement and importance in the fields such as, urban planing, telecommunication facility deployment plan, railway construction, construction engineering, spatial city development, safety and disaster prevention engineering. The currently used DEM system based on the 2-D digital maps and contour lines has limitation in implementation in reproducing the 3-D spatial city. Currently, the LiDAR data which combines the laser and GPS skill has been introduced to obtain high resolution accuracy in the altitude measurement in the advanced country. In this paper, we first introduce the LiDAR based researches in advanced foreign countries, then we propose the data generation scheme and an solution algorithm for the optimal management of our 3-D spatial u-City construction. For this purpose, LiDAR based height data transformed to DEM, and the realtime unification of the vector via digital image mapping and raster via exactness evaluation is transformed to make it possible to trace the model of generated 3-dimensional model with long distance for 3D u-city model generation.

• Journal of Environmental Science International
• /
• v.18 no.10
• /
• pp.1123-1134
• /
• 2009

This study was designed to evaluate qualitatively and quantitatively the pollutant compositions, which were emitted from three types of mosquito repellents(MRs)(mat-, liquid-vaporized, and coil-type) by utilizing a 50-L environmental chamber. A qualitative analysis revealed that 42 compounds were detected on the gas chromatography/mass spectrometer system, and that the detection frequency depended upon chemical types. Nine of the 42 compounds exhibited a detection frequency of 100%. Four aromatic compounds(benzene, ethyl benzene, toluene, and xylene) were detected in all test MRs. The concentration equilibriums in the environmental chamber were achieved within 180 min after sample introduction. The coil-type MR represented higher chamber concentrations as compared with the mat- or liquid-vaporized-type MR, with respect to the target compounds except for naphthalene. In particular, the chamber concentrations of ethyl benzene, associated with the use of coil-type MR, were between 0.9 and $65\;mg\;m^{-3}$ whereas those of mat- and liquid-vaporized-type MRs we~e between 0.5 and $2.0\;mg\;m^{-3}$and 0.3 and $1.4\;mg\;m^{-3}$, respectively. However, naphthalene concentrations in the chamber, where a liquid-vaporized-type MR was placed, were measured as between 17.8 and $56.3\;mg\;m^{-3}$, but not detected in the chamber, where a mat- or coil-type MR was placed. The empirical model fitted well with the time-series concentrations in the environmental chamber(in most cases, determination coefficient, $R^2$ ≿ 0.9), thereby suggesting that the model was suitable for testing emissions. In regards to the target compounds except for benzene, although they were emitted from the MRs, health risk from individual exposure to them were estimated not to be significant when comparing exposure levels with no observed adverse exposure levels or lowest observed adverse exposure levels of corresponding compounds. However, it was concluded that the use of MRs could be an important indoor source as regards benzene.

• Asian Pacific Journal of Cancer Prevention
• /
• v.16 no.14
• /
• pp.5755-5762
• /
• 2015

Background: Short-course preoperative radiation (SCRT) with delayed surgery was found to increase pathologic complete response (pCR) rates in several trials. However, there was no clear answer on whether SCRT or long-course chemo-radiotherapy (LCRT) is more effective. Therefore we conducted this meta-analysis to evaluate the safety and efficacy of SCRT versus LCRT, both with delayed surgery, for treatment of rectal cancer. Materials and Methods: The literature was searched from PubMed, EMBASE, Web of Science, Cochrane Library and clinicaltrials.gov up to November, 2014. Quality of the randomized controlled trials (RCTs) was evaluated according to the Cochrane's risk of bias tool of RCT. The Grading of Recommendations Assessment, Development and Evaluation (GRADE) system was used to rate the level of evidence. Review Manager 5.3 was employed for statistical analysis. Pooled risk ratios (RRs) and 95% confidence intervals (CIs) were calculated. Results: Three RCTs, with a total of 357 rectal cancer patients, were included in this systematic review. Metaanalysis results demonstrated there were no significantly differences in sphincter preservation rate, local recurrence rate, grade 3~4 acute toxicity, R0 resection rate and downstaging rate. Compared with SCRT, LCRT was associated with significant increase in the pCR rate [RR=0.49, 95%CI (0.31, 0.78), P=0.003]. Conclusions: In terms of sphincter preservation rate, local recurrence rate, grade 3~4 acute toxicity, R0 resection rate and downstaging rate, SCRT with delayed surgery is as effective as LCRT with delayed surgery for management of rectal cancer. LCRT significantly increased pCR rate compared with SCRT. Due to risk of bias and imprecision, further multi-center large sample RCTs were needed to confirm this conclusion.

• Journal of Korea Water Resources Association
• /
• v.47 no.3
• /
• pp.269-283
• /
• 2014

This study evaluated the environmental impact based on watershed characteristics and climate change using RCP climate change scenarios provided by the Korea Meteorological Administration. Future dam inflow was estimated by the SWAT model. Dam safety evaluation and downstream duration curve analysis was performed using HEC-ResSim model. Trends of water quality was analyzed through seasonal-Kendall Test using existing water quality observation data. Release discharge and tributary runoff derived SWAT and HEC-ResSim models applied to Qual2E and the future change in water quality trends were analyzed. Integrated environmental review watershed following techniques will be able to obtain the river environment management system and environmental issues such as climate change, new guidelines for preemptively response will be provided.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.21 no.6
• /
• pp.615-632
• /
• 2008

The bridge health monitoring has become an important research topic in conjunction with damage assessment and safety evaluation of structures owing to the improvement of structural modeling techniques incorporating response measurements and the advancements in signal analysis and information processing capabilities. The bridge monitoring systems are generally composed of hardwares such as sensors, data acquisition equipment, data transmission systems, etc, and softwares such as signal processing, damage assessment, display and management, etc. In this paper, the research and development(R&D) activities on the information processing for structural health monitoring of bridges are reviewed. After a brief introduction to the process of bridge health monitoring, various information processing techniques including various signal processing and damage detection algorithms are introduced in detail. Several challenges addressing critical issues in the current bridge health monitoring system and future R&D activities are discussed.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.15 no.3
• /
• pp.219-230
• /
• 2017

This study was conducted to predict and evaluate the uncertainty of safety after closure of the second phase surface disposal facility of the Gyeongju intermediate and low level repository in Korea. In this study, four scenarios are developed considering both intact and degraded states of multi-layered covers and disposal containers; also, the fluid flow by a rainfall into the disposal facility is simulated. The rainfall conditions are implemented based on the monthly average data of the past 30 years (1985~2014); the simulation period is 300 years, the management period regulated by institutional provisions. As a result of the evaluation of the basic scenario, in which the integrity of both of the containers and the covers is maintained, it was confirmed that penetration of rainfall does not completely saturate the inside of the disposal facility. It is revealed that the multiple cover layers and concrete containers effectively play the role of barrier against the permeation of rainfall.

• Journal of the Korean Institute of Gas
• /
• v.27 no.1
• /
• pp.48-56
• /
• 2023

Currently, Hydrogen compressor is maintained and managed according to the safety management regulations of the operator. But it is not based on technical standards, so it is necessary to establish based on reliability. In this paper, hydrogen compressor taxonomy by ISO 14224 standard reviewed for hydrogen compressor operated by KOGAS-Tech hydrogen vehicle refueling station to establish 9-stage taxonomy, and FMEA was conducted to establish RCM strategy specified in SAE JA1011, and 1012. It is expected that results of taxonomy and RCM strategy will be used as basic data for development of standards for verifying the performance of compressors.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.220-220
• /
• 2022

물관리 일원화, 물관리기본법 제정·시행 등 우리나라 물관리 체계의 혁신기에 정책의 구심점 역할을 수행할 통합 물관리 전략 마련이 요구됨에 따라, 최근 관계부처 합동으로 「제1차 국가물관기본계획(2021~2030)」을 수립하여 공표·발간되었다. 국가물관리기본계획에서는 유역단위의 물관리를 원칙(12대 기본원칙 중(中))로 하며, 물관리 3대분야(수질·수생태, 이수, 치수)에 대한 추진전략을 수립하였다. 또한, 지속가능한 물관리 체계를 구축하기 위해 추진전략별 주요 관리지표를 설정하였으며, 이를 통해 물관리 방향을 정립하고 분야별 관련 및 하위계획과의 일관성·정합성을 유지하고자 하였다. 이에 본 연구에서는 추진전략별 주요 관리지표 중, 유역 재해안전도와 관련하여 하천범람에 대한 기존의 치수안전도의 한계점을 검토하고 유역단위의 치수관리 현황을 평가 할 수 있는 방안을 마련하고자 하였다. 과거 유역종합치수계획에서의 치수안전도는 홍수피해잠재능(PFD)을 적용하여 등급별 홍수방어대책 수립방향 및 하천의 설계빈도 조정을 검토하였으며, 홍수피해잠재능(PFD)의 실무적 적용 어려움(산정인자 다(多)), 설계빈도와의 연계성 부족, 치수단위구역의 공간적 정확성 미흡 등에 대한 개선·보완의 의견이 제기되어 왔다. 또한, 유역내 전체하천이 아닌 주요 하천을 대상으로만 치수안전도 설정하여 유역단위의 치수관리에 한계가 있으며, 하천 전체구간의 설계빈도 상향에 따른 홍수방어대책이 비경제적인 것으로 판단된다. 따라서, 기존의 치수안전도의 한계점을 개선하기 위하여 홍수피해잠재능(PFD)의 산정인자 단순화, 홍수위험지도를 활용을 통한 치수단위구역의 공간적 정확도 향상 및 치수단위구역별 설계빈도 조정 가능 등의 개선방안을 검토하였으며, 빈도별 치수단위구역의 홍수피해잠재능(PFD)의 통계적 특성 분석을 통해 등급 설정 및 설계빈도 조정 기준을 제시하였다. 그리고 유역내 전체하천에 대한 치수단위구역별 치수안전도를 설정하고, 중권역 단위의 치수안전도를 평가하여 유역단위의 치수관리 현황을 정량적으로 제시함에 유역 재해안전도로 활용이 가능할 것으로 판단된다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.343-356
• /
• 2016

The Korea Radioactive Waste Agency (KORAD) has developed a dual-purpose metal cask for the dry storage of spent nuclear fuel that has been generated by domestic light-water reactors. The metal cask was designed in compliance with international and domestic technology standards, and safety was the most important consideration in developing the design. It was designed to maintain its integrity for 50 years in terms of major safety factors. The metal cask ensures the minimization of waste generated by maintenance activities during the storage period as well as the safe management of the waste. An activation evaluation of the main body, which includes internal and external components of metal casks whose design lifetime has expired, provides quantitative data on their radioactive inventory. The radioactive inventory of the main body and the components of the metal cask were calculated by applying the MCNP5 ORIGEN-2 evaluation system and by considering each component's chemical composition, neutron flux distribution, and reaction rate, as well as the duration of neutron irradiation during the storage period. The evaluation results revealed that 10 years after the end of the cask's design life, $^{60}Co$ had greater radioactivity than other nuclides among the metal materials. In the case of the neutron shield, nuclides that emit high-energy gamma rays such as $^{28}Al$ and $^{24}Na$ had greater radioactivity immediately after the design lifetime. However, their radioactivity level became negligible after six months due to their short half-life. The surface exposure dose rates of the canister and the main body of the metal cask from which the spent nuclear fuel had been removed with expiration of the design lifetime were determined to be at very low levels, and the radiation exposure doses to which radiation workers were subjected during the decommissioning process appeared to be at insignificant levels. The evaluations of this study strongly suggest that the nuclide inventory of a spent nuclear fuel metal cask can be utilized as basic data when decommissioning of a metal cask is planned, for example, for the development of a decommissioning plan, the determination of a decommissioning method, the estimation of radiation exposure to workers engaged in decommissioning operations, the management/reuse of radioactive wastes, etc.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.55-63
• /
• 2020

The IoT technology is a field that applies and converges the technologies in the existing industrial environment, instead of new technologies. The IoT technology is releasing various application services converged with other industries such as smart home, healthcare, construction, and automobile, and it is also possible to secure the work efficiency and convenience of users of IoT-based technologies. However, the security threats occurring in the IoT-based technology environment are succeeding to the vulnerability of the existing wireless network environment. And the occurrence of new and variant attacks in the combination with the ICT convergence environment, is causing damages. Thus, in the IoT technology-based environment, it would be necessary to have researches on the safe transmission of messages in the communication environment between user and device, and device and device. This thesis aims to design a safe communication protocol in the IoT-based technology environment. Regarding the suggested communication protocol, this thesis performed the safety analysis on the attack techniques occurring in the IoT technology-based environment. And through the performance evaluation of the existing PKI-based certificate issuance system and the suggested communication protocol, this thesis verified the high efficiency(about 23%) of communication procedure. Also, this thesis verified the reduced figure(about 65%) of the issued quantity of certificate compared to the existing issuance system and the certificate management technique.