• Journal of the Korean Institute of Gas
• /
• v.21 no.4
• /
• pp.21-29
• /
• 2017

Small and medium industry facility handling hazardous chemicals was inspected and summarized. The inspection results were summarized in four categories such as hazards to process, storage, workers, and the others. The result was applied to further improvement of the facility. In conclusion, the industry intented to satisfy minimum requirement of regulation and they do not pay attention to keep maintaining the facility in integrity condition.

• Journal of the Korea Safety Management & Science
• /
• v.10 no.2
• /
• pp.217-223
• /
• 2008

Measurement is used for evaluation of product or process exactly. If it couldn't measured correctly, Quality-cost must be raised and it would be hard to improve product quality. So, this study suggests improvement guide line for the multilateral problems of measuring instrument operation based on the investigation of 157 small and medium-sized enterprises in February, 2008. To use inspection gig correctly, man who treat it must be accustomed with the structure, the performance, the method. The inspection gig is selected properly for the measurement goal. If not, results couldn't be correctly or wasted time, efforts, and costs. When selecting a inspection gig, the locating, the clamping, and the efficiency must be considered.

• Journal of the Korea Safety Management & Science
• /
• v.19 no.3
• /
• pp.49-58
• /
• 2017

This paper suggests a specific model that could efficiently improve the interaction and the interface between MES(Manufacturing Execution System) server and POP(Point of Production) terminal through electronic document server and electronic pen, bluetooth receiver and form paper in disassembly and process inspection works. The proposed model shows that the new method by electronic document automation system can more efficiently perform to reduce processing time for maintenance work, compared with the current approach by handwritten processing system. It is noted in case of the method by electronic document automation system that the effects of proposed model are as follows; (a) While the processing time per equipment for maintenance by the current method was 300 minutes, the processing time by the new method was 50 minutes. (b) While the processing error ratio by the current method was 20%, the error ratio by the new method was 1%.

• Journal of the Korea Safety Management & Science
• /
• v.6 no.4
• /
• pp.83-97
• /
• 2004

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also End step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the 100 % inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO 2859-0-3 sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

• Proceedings of the Safety Management and Science Conference
• /
• 2004.11a
• /
• pp.153-164
• /
• 2004

The growing importance of product quality is becoming more and more daily apparent as we enter the age of globalization around the world. And the product safety is getting more focus as well as product quality. As a result, many domestic companies are putting a lot of emphasis on safety measures and management activities and these companies' products are mainly superior to other companies' product. When we separate the product quality procedure into 3 steps, i.e. quality secure-quality confirm-quality guarantee, of course the 1st step is the most important, but also 2nd step of product quality confirm process is important. And in mass production environment, sampling inspection is more desirable than the $100\;\%$ inspection procedure. As a part of globalization trend, KS system is also being revised and reestablished based on ISO, IEC, etc. which are based on international standard. Conventional KS sampling inspection standards were in many areas quite different from ISO sampling standards, only KS A 3102, 3104, 3151 are left and the rest become obsolete, and even the ones that are still around are planned to the gone step by step. It has been already 3 years since the new KS A ISO $2859-0\sim3$ sampling inspection process has been established which the abolition of the popular KS A 3101, KS A 3105, KS A 3109, yet the implementation rate is very slow. This study will attempt to analyze the new KS A ISO 2859-2 and KS A ISO 2859-3, and try to understand the difference as that the new standard can be easily understood and used widely among companies, by using examples. Our attempt is to help implement with the companies with active safety involvement but the final result can be spread among other companies as well in the near future.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.2
• /
• pp.71-77
• /
• 2020

The checklist currently used for aviation safety inspection performed by ASIs(Aviation Safety Inspectors) consists of inspection groups and multiple items, it does not have safety attribute and structured hierarchy system which required to efficiently process aviation safety analysis. On this study, categorized the domestic and foreign ASI checklist by safety attribute from ICAO recommended and presented composition of checklist for safety assurance by comparative analysis composition of domestic and foreign ASI checklist.

• Journal of the Korean Society of Safety
• /
• v.30 no.6
• /
• pp.56-62
• /
• 2015

Recently, one of countermeasures against aging SOC infrastructures, performance-focused management including the serviceability, functionality, durability, and economics has been changed from the structural safety-focused evaluation has changed into The current inspection and diagnosis for the major SOC facilities in Korea has been carried out by the specific principle of details, and most of them checked by the visual inspection are focused on the repair and rehabilitation of the damaged structures, thus they are the preventive maintenance. However, the performance-focused management should be replaced for the effective and economic maintenance as wells as for the minimization of the damage. In this regard, this study the appropriacy of the current evaluation items about the concrete retaining wall, one of SOC infrastructures as the previous step forward the performance-focused management. In order to deduct the effective evaluation items in order, the entropy, analytic hierachy process (AHP), and promethee analysis were peformed and the results were compared and discussed.

• International Journal of Quality Innovation
• /
• v.7 no.2
• /
• pp.97-124
• /
• 2006

The purpose of this research is to create an expert risk-based piping system inspection model. The proposed system includes a risk-based piping inspection system and a piping inspection guideline system. The research procedure consists of three parts: the risk-based inspection model, the risk-based piping inspection model, and the piping inspection guideline system model. In this research procedure, a field plant visit is conducted to collect the related domestic information (Taiwan) and foreign standards and regulations for creating a strategic risk-based piping inspection and analysis system in accordance with the piping damage characteristics in the petrochemical industry. In accordance with various piping damage models and damage positions, petrochemical plants provide the optimal piping inspection planning tool for efficient piping risk prediction for enhancing plant operation safety.

• Journal of The Korean Society of Agricultural Engineers
• /
• v.57 no.5
• /
• pp.89-99
• /
• 2015

In this research, 1,032 data of precise safety inspection from 2004 to 2013 are gathered and constructed for finding effective safety inspection systems. Items are extracted from constructed data and factors for typology are decided with statistical method such as principle component analysis and cluster analysis. For factor decision, we extruded independent characteristics such as morphological and geographical characteristic, and deleted items which can be expressed by combination of independent characteristics. Four factors such as total storage, watershed ratio, levee length ratio, and spillway length ratio are extracted in this process. In cluster analysis, levee length ratio is excluded because it is not separated as cluster. Finally nine types of agricultural reservoir are extruded by total storage, watershed ratio, and spillway length ratio with frequency analysis.

• Nuclear Engineering and Technology
• /
• v.55 no.12
• /
• pp.4695-4702
• /
• 2023

Nuclear power plants play a pivotal role in the global energy infrastructure, fulfilling a substantial share of the world's energy requirements in a sustainable way. The management of these facilities, especially the handling of spent nuclear fuel (SNF), necessitates meticulous inspections to guarantee operational safety and efficiency. However, the prevailing inspection methodologies lean heavily on human operators, which presents challenges due to the potential hazards of the SNF environment. This study introduces the design of a novel Pre-Batched Inspection Strategy (PBIS) that integrates robotic automation and image processing techniques to bolster the inspection process. This methodology deploys robotics to undertake tasks that could be perilous or time-intensive for humans, while image processing techniques are used for precise identification of SNF targets and regulating the robotic system. The implementation of PBIS holds considerable promise in minimizing inspection time and enhancing worker safety. This paper elaborates on the structure, capabilities, and application of PBIS, underlining its potential implications for the future of nuclear energy inspections.