• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.233-234
• /
• 2021

The freezing of the water meter due to the cold wave in winter causes safety accidents caused by freezing and suspending the supply of tap water and various inconveniences. In this study, the water meter develops a test device similar to the environment in which the actual freezing occurs and tests repeatedly by changing the temperature, humidity, flow rate, pressure, valve improvement, pump operation status, etc. Based on the data obtained through this, it is planning to predict the timing of freezing by applying AI technology to correlation between freeze influencing factors.

• Wind and Structures
• /
• v.36 no.1
• /
• pp.1-14
• /
• 2023

To evaluate the wind shielding effect of bridge towers with multiple limbs on high-speed trains, a wind tunnel test was conducted to investigate the aerodynamic characteristics of vehicles traversing multi-limb towers, which represented a combination of the steady aerodynamic coefficient of the vehicle-bridge system and wind environment around the tower. Subsequently, the analysis model of wind-vehicle-bridge (WVB) system considering the additional moments caused by lift and drag forces under nonuniform wind was proposed, and the reliability and accuracy of the proposed model of WVB system were verified using another model. Finally, the factors influencing the wind shielding effect of multi-limb towers were analyzed. The results indicate that the wind speed distributions along the span exhibit two sudden changes, and the wind speed generally decreases with increasing wind direction angle. The pitching and yawing accelerations of vehicles under nonuniform wind loads significantly increase due to the additional pitching and yawing moments. The sudden change values of the lateral and yawing accelerations caused by the wind shielding effect of multi-limb tower are 0.43 m/s² and 0.11 rad/s² within 0.4 s, respectively. The results indicate that the wind shielding effect of a multi-limb tower is the controlling factor in WVB systems.

• Advances in Computational Design
• /
• v.7 no.4
• /
• pp.345-369
• /
• 2022

Infectious disease emergency hospitals are usually temporarily built during the pneumonia epidemic with higher requirements regarding diagnosis and treatment efficiency, hygiene and safety, and infection control.This study aims to identify how the Building Information Modeling (BIM) + Industrialized Building System (IBS) approach could rapidly deliver an infectious disease hospital and develop site epidemic spreading algorithms. Coronavirus-19 pneumonia construction site spreading algorithm model mind map and block diagram of the construction site epidemic spreading algorithm model were developed. BIM+IBS approach could maximize the repetition of reinforced components and reduce the number of particular components. Huoshenshan Hospital adopted IBS and BIM in the construction, which reduced the workload of on-site operations and avoided later rectification. BIM+IBS integrated information on building materials, building planning, building participants, and construction machinery, and realized construction visualization control and parametric design. The delivery of Huoshenshan Hospital was during the most critical period of the Coronavirus-19 pneumonia epidemic. The development of a construction site epidemic spreading algorithm provided theoretical and numerical support for prevention. The agent-based analysis on hospital evacuation observed "arched" congestion formed at the evacuation exit, indicating behavioral blindness caused by fear in emergencies.

• International conference on construction engineering and project management
• /
• 2015.10a
• /
• pp.336-338
• /
• 2015

This research is to propose an applicable framework for real-time health surveillance and safety monitoring at construction sites. First this study aims at finding (1) a framework for health surveillance that is likely to benefit employers and employees in the industry, (2) a valid way to identify factors or conditions with potential health concerns that can occur under particular work conditions, (3) An effective way to apply wireless/mobile sensors to construction workers using real-time/live data transmission methods, and (4) A relationship between a worker's vital signs and job site environment. Biosensors for physiological response and devices for weather/work related data are to collect real-time data. Relationships between jobs and physiological responses are analyzed and factors that touched particularly contributing to certain responses are identified. When data are incorporated with tasks, factors affecting tasks can be identified to estimate the magnitude of the factors. By comparing work and normal responses possible precautionary actions can be considered. In addition, the study would be lead to improving (1) trade-specific dynamic work schedules for workers which would be based on various factors affecting worker health level and (2) reevaluating worker productivity with health status and work schedule, thereby seeking ways to maximize worker productivity. Through a study, the paper presents expected benefits of implementing health monitoring.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.3
• /
• pp.347-357
• /
• 2023

United States Nuclear Regulatory Commission (U.S. NRC) specifies regulations on obtaining licenses and describes the technical position on the average waste concentration, also known as Concentration Averaging and Encapsulation Branch Technical Position (CA BTP); CA BTP helps classify blendable waste and discrete items and address concentration averaging. The technical position details are reviewed and compared in a real environment in Korea. A few cases of concentration averaging based on the application of CA BTP to domestic radioactive waste are presented, and the feasibility of the application is assessed. The radioactive waste considered herein does not satisfy the Disposal Concentration Limit (DCL) of the second-phase disposal facility while applying the preliminary classification. However, if CA BTP is applied when the radioactive waste is mixed with other radioactive waste items in a large and heavy container, it can be disposed of at the second-phase disposal facility in Gyeongju Repository. To apply the CA BTP of the U.S. NRC, it is necessary to investigate the safety assessment conditions of the US and Korea.

• The Journal of Industrial Distribution & Business
• /
• v.15 no.2
• /
• pp.19-30
• /
• 2024

Purpose: This paper provides both quantitative and qualitative literature review on employee engagement in State Owned Enterprises (SOEs) as portrayed in literature and offers more insight into the concept on how it can be optimised. Research design, data and methodology: The study adopted a desktop research methodology. A review and analysis of both theoretical and empirical research and articles which are relevant to employee engagement in SOEs was conducted. Only secondary information gathered through those articles and research was used to analyse and build literature review on employee engagement in SOEs. Results: A literature review of both qualitative and quantitative research on employee engagement in organisations generally and in SOEs particularly was done, and it indicated the positive relationship between employee engagement and organisational performance. From the study, it is evident that employee engagement is not optimal around the world, therefore it is an area which needs more attention. Hence, this study proffered strategies for enhancing employee engagement in SOEs. Conclusions: This study proffers strategies for optimising employee engagement in SOEs. These are brand image, work environment, management and leadership characteristics, training and development opportunities, performance management, work life balance, effective communication and Kahn's three factors of meaningfulness, safety and availability. These strategies are essential in optimising employee engagement as portrayed in the reviewed literature.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.21 no.4
• /
• pp.543-558
• /
• 2023

Currently, Japan is undertaking a nationwide project to measure and map radioactive contamination around Fukushima, as part of the efforts to restore normalcy following the nuclear accident. The Japan Atomic Energy Agency (JAEA) manages the Fukushima Environmental Safety Center, located approximately 20 km north of the Fukushima Daiichi nuclear power plant in Minamisōma City, Fukushima Prefecture. In collaboration with the JAEA, this study involved conducting comparison experiments and analyses with radiation detectors in high radiation environments, a challenging task in Korean environments. Environmental radiation surveys were conducted using three types of detectors: CZT, NaI(Tl), and LaBr₃(Ce), across two contaminated areas. Dose rate values were converted using dose rate conversion factors for each detector type, and dose rate maps were subsequently created and compared. The detectors yielded similar results, demonstrating their feasibility and reliability in high radiation environments. The findings of this study are expected to be a crucial reference for enhancing the verification and supplementation of procedures and methods in future radiation measurements and mobile surveys in high-radiation environments, using these three types of radiation instruments.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.10
• /
• pp.2822-2843
• /
• 2023

All aspects of human life have become increasingly dependent on data in the last few decades. The development of several applications causes an enormous issue on data volume in current years. This information must be safeguarded and kept in safe locations. Massive volumes of data have been safely stored with cloud computing. This technology is developing rapidly because of its immense potentials. As a result, protecting data and the procedures to be handled from attackers has become a top priority in order to maintain its integrity, confidentiality, protection, and privacy. Therefore, it is important to implement the appropriate security measures in order to prevent security breaches and vulnerabilities. An improved version of Modular Encryption Standard (IMES) based on layered modelling of safety mechanisms is the major focus of this paper's research work. Key generation in IMES is done using a logistic map, which estimates the values of the input data. The performance analysis demonstrates that proposed work performs better than commonly used algorithms against cloud security in terms of higher performance and additional qualitative security features. The results prove that the proposed IMES has 0.015s of processing time, where existing models have 0.017s to 0.022s of processing time for a file size of 256KB.

• Journal of Korean Academy of Nursing
• /
• v.53 no.5
• /
• pp.556-569
• /
• 2023

Purpose: This phenomenological study tried to understand the essence of the transitional care experience of medicaid case managers and its structural meaning. In addition, it was attempted to establish a system of transitional care and seek support measures for medicaid case managers. Methods: The participants of this study were 7 medicaid case managers who had spent more than 1 year and 6 months in medicaid pilot project. Data were collected with individual in-depth interviews from June to December 2021. The data were analyzed by Giorgi's phenomenological analysis method. Results: The seven constituents derived from the results of this study were 'struggle to establish a living environment', 'dedication to supporting independent living', 'anxiety about safety', 'pressure on care responsibilities', 'distress in building the pilot project', 'pride in role', and 'expectation for improvement'. Conclusion: The study results provide a comprehensive understanding of the transition care reality for medicaid case managers. They also shed light on managers' perceptions and attitudes. These findings can serve as fundamental information for establishing support measures for medicaid case managers and transitional care systems.

• Journal of the FoodService Safety
• /
• v.3 no.2
• /
• pp.49-58
• /
• 2022

The objectives of this study were to investigate the behavior characteristics of pathogenic E. coli, Salmonella Typhimurium, Campylobacter jejuni, and Listeria monocytogenes in various kinds of meat (beef, chicken, and pork) and to compare their risk using FDA-iRISK. The growth of S. Typhimurium in chicken and pathogenic E. coli in pork and beef was well supported and posed a high risk. A similar trend was observed in the risk comparison results using the iRISK. When comparing total disability adjusted life years (DALY) per year based on the kinds of meat, chicken was the highest (88.2), followed by pork (58.5) and beef for "yukhoe" (18.8). When comparing scenarios grouped by bacteria, The highest total DALYs per year was observed with pathogenic E. coli (121), followed by S. Typhimurium (44.8) and L. monocytogenes (1.67E-³). These results indicate that the risk of combining meat and foodborne pathogens varies under the same distribution environment. Thus, strict management and supervision are required to store and deliver raw meat to prevent cross-contamination among the raw meats at the processing plant and retail market.