• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.742-747
• /
• 2008

This paper is described the systematic activities of RCM to improve the availability for AREX railway system. The purpose of these activities are to maintain and enhance the reliability, availability, maintainability and safety, and to implement the effective maintenance for electrical and mechanical system including rolling stock, signalling, telecommunication, power supply, overhead catenary and platform screen door with impact to train operation.. The main activities consist of systematic failure and repair recording by integral information system, analysis and corresponding countermeasure. As applying these activities in opeartion and maintenance works, the availability of AREX railway system is going on improvement gradually, and maintenacne works are improved with these results.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2004년도 추계학술대회 논문집
• /
• pp.652-656
• /
• 2004

Crashworthy design of trains is now indispensable procedure in modern railway vehicle design for ensuring the safety of Passengers and crew. It is now widely recognized that a more strategic approach is needed in order to absorb higher level energy in a controlled manner and minimize passenger injuries effectively. The first design step in this strategic approach is the design of the front end structure(so called HE extremities) to absorb a large part of total impact energy and then the structure of passengers non-accommodation zones(so called LE extremities) is designed to absorb the rest of impact energy. In this paper, the passengers entrance door area is selected as the LE(low energy) extremities and the design of the LEE was carried out. The main part of LEE design procedures is the design of energy absorbing tubes. For this purpose, the several tube candidates are introduced and compared to each others with numerical crash simulation.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 춘계학술대회 논문집
• /
• pp.139-144
• /
• 2003

This study was aimed to establish failure management plan of the rubber-tired AGT light rail vehicle for its safety case, which was developed according to the Korean standardized specifications for the light rail vehicle. Vehicular 9 failure modes anticipated during the system operation were considered, which are single malfunction of redundant equipment, malfunction of train radio, public address and air compressor, battery, main circuit NFB trip, on-board ATO control device malfunction, on-board ATP control device malfunction, fail of brake release, flat tire, train emergency door open.

• 한국가정과학회지
• /
• 제7권1호
• /
• pp.81-99
• /
• 2004

This study examined one room(studio apartment) residential deweller's housing behavior and housing need, and the relationship between the sense of housing values and housing satisfaction of one-room residence, The study surveyed 302 one-room residents in Busan city. The researcher modified, complimented, and used the previous researches on housing values and housing satisfaction. The analysis of the data used SPSS Win 10.0 program. The results of the research can be summarized as follows: 1. The motive of choosing one-room residence was mainly the closeness to the school or work, Jeonse(Rent with a one-room deposit) was more common than ownership, and the size is one-room residence was 10 to 15 Pyeong. 2. Among the five housing values of one-room residence dwellers, that is, amenity, indoor and outdoor environment, economy/convenience, convenience in transportation, and the interior functionality, the convenience in transportation was ranked highest, and the indoor and out door environment and economy/convenience followed. 3. The housing satisfaction of one-room residents was highest in location, and also high in the safety and the security or privacy, and the convenience of inside facility.

• 한국실내디자인학회:학술대회논문집
• /
• 한국실내디자인학회 2005년도 춘계학술발표대회 논문집
• /
• pp.275-278
• /
• 2005

This study suggests experimental designs for interior products utilizing LEDs that are ideal for expressing diversity of light. It also attempts to develop various products by incorporating economic efficiency and diverse colors of LEDs into interior elements. LED door handles offer a range of 6-color LED lighting strips as a safety lighting system, while multi-function furniture (CUBE-scape) consists of LEDs with double-sided emitted lighting on completely transparent track structures. Both products are designed to make interior elements more user-friendly as they make most use of unique effects of LED such as light vibration and changes. Also the combination of plastic material-Technogel$^{\circledR}$, polypropylene, polycarbonate- maximize the LED lighting effect and diversify the designed item selection.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2007년도 제38회 하계학술대회
• /
• pp.183-183
• /
• 2007

Bimodal Tram is a new public transportation system combined subway with bus and consists of variable electric equipment to accomplish the comfortness, reliability, safety and so on. One of them is VCU(Vehicle Control Unit) for Performing driver's cmmand and monitoring the state of other equipment. To lessen the wiring and the interference of outer electromagnetic noises is very important things for bimodal tram with complicated configuration of electric equipments. This paper has investigated the application of CAN(Controller Area Network) communication method for VCU which has display, central unit and several nodes that are connected with other electric equipments(HVAC, door controller etc). We designed and manufactured the prototype of VCU which eventually will be installed on bimodal tram being developed in KRRI at present.

• International Journal of Railway
• /
• 제3권1호
• /
• pp.34-37
• /
• 2010

In recent, the railway system consists of subsystems as rolling stock and infrastructures as signaling, telecommunication, power supply, overhead contact and platform screen door, etc. Furthermore, each subsystem has complicated interface so as not to understand these relationship. Consequently, to operate the railway system continuously with required safety and availability, the failure data should be corrected and analyzed systematically during operation. To achieve this object effectively, this paper presents the method which is evaluating the operational risk quantitatively using failure data, and selecting the critical equipment. Following this analysis, the improvement plan is established and applied to reduce the operational risk on system or equipment. From this study, the critical equipments of system could be determined and prioritized by risk analysis. Also, the effective maintenance to prevent critical failure could be implanted by this suggested methodology.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 추계학술대회 논문집
• /
• pp.1656-1660
• /
• 2008

Internal noise level of a train running in tunnel is influenced by sound transmission coefficients of floor, side door, window and gangway as well as by the sound power levels of major noise sources. The structure of a gangway should be strong enough for the safety of passengers while it should be flexible enough for the movement of a train in curves. Due to this the sound transmission coefficients of gangways are relatively low compared to those of carbody structure. The effect of the sound transmission coefficient of the gangway is studied in this paper in regards to the existence of end doors.

• International Journal of Internet, Broadcasting and Communication
• /
• 제13권3호
• /
• pp.1-11
• /
• 2021

Development of ICT technologies leads exponential growth of various sharing economy over the last couple of years. The intuitive advantage of the sharing economy is efficient utilization of idle goods and services, but there are safety and security concerns. In this paper, we propose a onetime password based access control system to support secure accommodation sharing service and show the implementation results. To provide a secure service to both the provider and the user, the proposed system issues a onetime access password that is valid only during the sharing period reserved by the user, thereafter access returns to the accommodation owner. Especially, our system provides secure user access by merging the two elements of speaker recognition using voice and a one-time password to open and close the door lock. In this paper, we propose a secure system for accommodation sharing services as a use-case, but the proposed system can be applicable to various sharing services utilizing security-sensitive facilities.

• 한국실내디자인학회논문집
• /
• 제18권3호
• /
• pp.114-121
• /
• 2009

The number of the disabled is increasing every year. Growing interest in social welfare, but still the disabled person in places is restricted on the activities are due to obstacles. This study proposes an improvement direction through an research and analysis of installation status of convenient facilities in social welfare halls was planned after that the law of increase of convenience for the disabled person is enforced in 1998. This study analyzed nine social welfare halls of seoul including Yongsan-gu(GW), Guro-gu(GD, HW), Yeongdeungpo-gu(SG), Seodaemun-gu(SD), Dobong-gu(DB), Nowon-gu(NS), Seongbuk-gu(WG) and Dongdaemun-gu(JG). The evaluation criteria for the installation of convenient facilities for the disabled person in each social welfare hall based on the law of increase of convenience for the disabled person, and referred to other data. Also, review the criteria for the installation of convenient facilities, and grasp the present situation through the survey of convenient facilities in social welfare halls, and provides the installation standards of convenient facilities. The result are as followings. There were many problems to be improved in approach of the intermediate space, parking lot, entrance of the inside space and corridor that must be installed for the convenience of the disabled. In the intermediate space, the slope of the ramp, curb, induction handle etc. for a safety must be installed. Parking spaces for the disabled must be located closest to the main entrance, an induction marker or the handle, and the attachment of a directional sign etc. must be improved. In the inside space, it is convenient for the disabled person use to install an automatic door and swing door simultaneously at the main entrance. And, the height of the door handle, an induction block, a braille display panels of the appropriate height in the entrance, a braille display in start and end of the stairs handle, the handle of the side wall, the stairs to prevent slippage etc. must be improved in the corridors. The case of the sanitation which is a recommendation item is equipped formally with disabled toilets are difficult to use. Information and other convenience facilities for the disabled person in all the social welfare halls were not considered.