• Journal of Radiation Protection and Research
• /
• v.12 no.1
• /
• pp.34-39
• /
• 1987

Radiation shielding analysis for a 6MeV X-ray facility was carried out. The primary and leakage radiation for the facility can be evaluated based on the methodology in NCRP No. 49 and 51. The present study deals with radiation scattering analysis for the outside and inside door of the facility based on the albedo concept. The calculated dose rates were compared with the results of MORSE-CG code calculation and the measured data, resulting in a good agreement, even though there existed some deviation for the inside door. These results can be utilized to the radiation shielding design of the medical and industrial X and gamma ray facilities, and to the safety evaluation of these facilities.

• Proceedings of the KSR Conference
• /
• 2011.05a
• /
• pp.1352-1357
• /
• 2011

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, the application of doorstep equipments to use mixed with two types of platforms are examined on the supposition that the train only for the low level platform stops in the both low and high level platforms.

• Proceedings of the KSR Conference
• /
• 2011.10a
• /
• pp.484-489
• /
• 2011

Heights of a platform above the rail for the passenger train in the country are classified into two categories such as the low level (500mm; mainline) and the high level (1,135mm; metropolitan subway line) platforms. In order to operate similarly both a mainline railroad and a metropolitan subway line, as the requisite door safety system, it is necessary to develop the doorstep equipment of the rolling stock regardless of both the low and high level platforms. In this study, performance requirements of doorstep equipments used for two types of platforms are examined on the supposition that the train only for the low level platform could stop in the both low and high level platforms.

• Journal of Applied Reliability
• /
• v.15 no.4
• /
• pp.276-281
• /
• 2015

Purpose : The purpose of this study is to propose that domestic rail must the work to be done in the RCM system and railway operators are to present a direction to establish the efficient and systematic system based on this. Methods : In recent years, domestic railway accidents has decreased year rapidly every year. In particular, suicidal ideation was greater than 50% of the accidents is showing a larger decrease in the influence of the screen-door construction. However, the train delay has been maintained without major changes since 2010. The most important cause of the delay operation is a vehicle breakdown. This fact demonstrates that effective maintenance of the most important activities in the railway accident prevention activities. So we have to build a RCM system in which the characteristics of the domestic railway accident. Conclusion : We proposed what is necessary functionality and the function requires a railway operators in RCM railway systeml.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.555-560
• /
• 2007

This paper focused on the ways of disater prevention and risk analysis of the passengers setting up the hypothesis when urban rapid transit broke out fire in subway tunnel which is PSD(Platform Screen Door) installed environment. compared the flud dynamic changes and evacuation specifications whether PSD being installed or not, tried to search the effective ways for sustaining passengers safety.

• Journal of Mechanical Science and Technology
• /
• v.20 no.12
• /
• pp.2025-2033
• /
• 2006

This paper presents, the design of a latch mechanism for wafer containers in a standard mechanical interface environment. For an integrated circuits fabrication factory, the standard mechanical interfaced wafer container is an effective tool to prevent wafers from particle contamination during wafer storage, transporting or transferring. The latch mechanism inside the container door is used to latch and further seal the wafer container for safety and air quality. Kinematic characteristics of the mechanism are established by analyzing the required functions of the mechanisms. Based on these characteristics, a methodology for enumerating feasible latch mechanisms is developed. New mechanisms with one degree-of-freedom and up to five links are generated. An optimum design is also identified with respect to the criteria pertinent to the application. The computer-aided simulation is also built to verify the design.

• Korean Institute of Interior Design Journal
• /
• v.15 no.5 s.58
• /
• pp.202-208
• /
• 2006

The purpose of this study is to suggest architectural planning guideline for the improvement of the evacuation environment in a ward. To suggest of guideline, the problem of irrational domestic criteria is searched according to compare National fire code (NFPA101, Life safety code) with Korea building law. This study includes stairs, corridors and exit door etc. but excludes fire facilities. To verify effectiveness of suggested guideline, egress simulation is run that based on databases according to literature survey. The results of this study could be summarized as follow: Suggested guidelines are subdivision(fire partition), evacuation by elevator, secure useful waiting space of elevator hall and smokeproof enclosures, the corridor is divided by fire or smoke barriers corridor from hazardous room, only wheeled items are arranged in corridors of a ward story. The result of computer simulation for suggested guidelines verify that egress time can be decreased 20% or above.

• Proceedings of the KSR Conference
• /
• 2004.06a
• /
• pp.1504-1506
• /
• 2004

The platform screen door(PSD) hasn't been installed yet within the manual operation system, that is, ATS & ATC Signal system. In other countries, it is mostly installed and operated within automatic operation system, that is, ATO. Especially, as a part of the environment friendly system installation, the installation of PSD shall be considered aggressively to improve the air quality in the underground area and to maintain the air-conditioning. Besides the number of suicides in the subway station gets increased these days causing safety hazard, so the installation of PSD is positively reviewed. To install PSD in the manual operation system, it is important to stop the train at the correct position. So we would like to suggest the technical system thereby.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1671-1674
• /
• 2007

A PSD system has a lot of characteristic for safety. Trust of performance test is very important. But PSD performance test has an effect on trust by proficiency of test staff because it is difficult to automate. In that specially the effort test, manual opening and shutting test and abrasion measurement, test staff is demanded for proficiency. Therefore the paper repeated measurement in same condition and studied proficient factor of examiner according to increased measurement counter. As a result, measurement uncertainty has improved.

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.259-266
• /
• 1999

This paper is intended to provide a method to design control software for the TCMS, train control and monitoring system. The TCMS with this control software will be applied KOREA Standard EMU. The control software is designed by SCADE Case tool to concern safety and reliability. The function for the EMU is implemented in software easily programmed, using a functional block, graphic programming language. The control software has modular design and each module is tested with SCADE simulator. This time we focus a door control module, present a design method and a simulation method for that module.