• 근관절건강학회지
• /
• 제30권2호
• /
• pp.93-102
• /
• 2023

Purpose: The purpose of this study was to examine the influence of safety control, nursing professionalism, and burnout on patient safety management activities of operating room nurses. Methods: Data were collected from August 10 to September 26, 2022 from 154 operating nurses who consented to participate and have worked for more than six months in hospitals with 300 or more beds in the Seoul-Incheon area. The data were analyzed using the SPSS/WIN 26.0 program. Results: The main factors affecting patient safety management activities were safety control (β=.36, p<.001) and nursing professionalism (β=.15, p=.046). The regression model was statistically significant (F=13.49, p<.001), with explanatory power of approximately 28.6%. Conclusion: Based on these results, the aforementioned activities can be promoted by preparing and providing an operating room safety management program that can improve safety control and establish proper nursing professionalism.

• Advances in aircraft and spacecraft science
• /
• 제10권1호
• /
• pp.1-18
• /
• 2023

This paper investigates the integrated control of an air-breathing hypersonic vehicle considering the safety of propulsion system under acceleration. First, the vehicle/engine coupling model that contains a control-oriented vehicle model and a quasi-one-dimensional dual-mode scramjet model is established. Next, the coupling process of the integrated control system is introduced in detail. Based on the coupling model, the integrated control framework is studied and an integrated control system including acceleration command generator, vehicle attitude control loop and engine multivariable control loop is discussed. Then, the effectiveness and superiority of the integrated control system are verified through the comparison of normal case and limiting case of an air-breathing hypersonic scramjet coupling model. Finally, the main results show that under normal acceleration case and limiting acceleration case, the integrated control system can track the altitude and speed of the vehicle extremely well and adjust the angle deflection of elevator to offset the thrust moment to maintain the attitude stability of the vehicle, while assigning the two-stage fuel equivalent ratio to meet the thrust performance and safety margin of the engine. Meanwhile, the high-acceleration requirement of the air-breathing hypersonic vehicle makes the propulsion system operating closer to the extreme dangerous conditions. The above contents demonstrate that considering the propulsion system safety will make integrated control system more real and meaningful.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제12권3호
• /
• pp.1152-1167
• /
• 2018

In this paper, I propose an application layer cooperative congestion control scheme for safety message broadcast in vehicular networks, called CMS, that adaptively controls a vehicle's safety message rate and transmit timing based on the channel congestion state. Motivated by the fact that all vehicles should transmit and receive an application layer safety message in a periodic manner, I directly exploit the message itself as a means of estimating the channel congestion state. In particular, vehicles can determine wider network conditions by appending their local channel estimation result onto safety message transmissions and sharing them with each other. In result CMS realizes cooperative congestion control without any modification of the existing MAC protocol. I present extensive NS-3 simulation results which show that CMS outperforms conventional congestion control schemes in terms of the packet collision rate and throughput, especially in a high-density traffic environment.

• International Journal of Safety
• /
• 제6권2호
• /
• pp.38-42
• /
• 2007

As railway signaling system is computerized, the significance on safety demonstration and assessment has been increased. Therefore, railway signaling system should reflect the needs for safety assessment technique. Various studies on safety assessment technique for railway signaling have been made in Europe and standardization of the requirements for safety acceptance has been initiated by IEC. In order to develop and establish the safety assessment techniques for railway signaling in Korea, we try to review safety assessment activities for signaling system via reviewing relevant case studies and consulting with experts. And also we propose the safety assessment activity/methodology for Korean railway signaling system.

• 대한가정학회지
• /
• 제42권9호
• /
• pp.149-160
• /
• 2004

This study investigated the effectiveness of traffic safety education by integrated activities on children's traffic safety knowledge. Subjects were 55 kindergarten children aged 5 years old. The subjects were divided into experimental and control groups. Traffic safety education by integrated activities were applied in the experimental group for 6 weeks. The traffic safety knowledge test was administered to the experimental and control groups for pre-test and post-test analyses. ANCOVA was carried out for both groups to verify the hypothesis of this study. There were statistically significant differences of the children's traffic safety knowledge score including walking, bike, and automobile between the experimental and control groups. To conclude, traffic safety education by integrated activities was very effective to increase children's traffic safety knowledge.

• Safety and Health at Work
• /
• 제6권3호
• /
• pp.159-173
• /
• 2015

The hand coordinate systems for measuring vibration exposures and biodynamic responses have been standardized, but they are not actually used in many studies. This contradicts the purpose of the standardization. The objectives of this study were to identify the major sources of this problem, and to help define or identify better coordinate systems for the standardization. This study systematically reviewed the principles and definition methods, and evaluated typical hand coordinate systems. This study confirms that, as accelerometers remain the major technology for vibration measurement, it is reasonable to standardize two types of coordinate systems: a tool-based basicentric (BC) system and an anatomically based biodynamic (BD) system. However, these coordinate systems are not well defined in the current standard. Definition of the standard BC system is confusing, and it can be interpreted differently; as a result, it has been inconsistently applied in various standards and studies. The standard hand BD system is defined using the orientation of the third metacarpal bone. It is neither convenient nor defined based on important biological or biodynamic features. This explains why it is rarely used in practice. To resolve these inconsistencies and deficiencies, we proposed a revised method for defining the realistic handle BC system and an alternative method for defining the hand BD system. A fingertip-based BD system for measuring the principal grip force is also proposed based on an important feature of the grip force confirmed in this study.

• 한국원자력학회:학술대회논문집
• /
• 한국원자력학회 2005년도 춘계학술발표회
• /
• pp.1195-1196
• /
• 2005

• Safety and Health at Work
• /
• 제8권2호
• /
• pp.189-197
• /
• 2017

Background: Despite the recent efforts to prevent industrial accidents in the Republic of Korea, the industrial accident rate has not improved much. Industrial safety policies and safety management are also known to be inefficient. This study focused on dynamic characteristics of industrial safety systems and their effects on safety performance in the Republic of Korea. Such dynamic characteristics are particularly important for restructuring of the industrial safety system. Methods: The effects of damping and elastic characteristics of the industrial safety system model on safety performance were examined and feedback control performance was explained in view of cost and benefit. The implications on safety policies of restructuring the industrial safety system were also explored. Results: A strong correlation between the safety budget and the industrial accident rate enabled modeling of an industrial safety system with these variables as the input and the output, respectively. A more effective and efficient industrial safety system could be realized by having weaker elastic characteristics and stronger damping characteristics in it. A substantial decrease in total social cost is expected as the industrial safety system is restructured accordingly. Conclusion: A simple feedback control with proportional-integral action is effective in prevention of industrial accidents. Securing a lower level of elastic industrial accident-driving energy appears to have dominant effects on the control performance compared with the damping effort to dissipate such energy. More attention needs to be directed towards physical and social feedbacks that have prolonged cumulative effects. Suggestions for further improvement of the safety system including physical and social feedbacks are also made.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.402-404
• /
• 2000

The train control system using radio is based on the radio communication between an on-board control system and a ground control system unlike other train control systems that rely on track circuit. To realize a new train control system based on a new principle, it is important to analyze safety in a systematic manner at an early stage, and identify important factors for the system. For this reason, we think a procedure that select hazards and identify their causes and allocate safety requirements to such hazards. This paper describes this procedure to realize system safety.

• 대한인간공학회지
• /
• 제32권3호
• /
• pp.279-291
• /
• 2013

Objective: The aim of this study was to compare old standard EN 954-1 and new standard EN ISO 13849-1 through case study and provide necessity of adaptation of EN ISO 13849-1 in Korea. Background: International and EU harmonized standard EN ISO 13849 "safety of machinery - Safety-related parts of control system" is classified into Part 1: General principles for design and Part 2: Validation. EN ISO 13849-1 standard was introduced in Official Journal of the European Union on September 8, 2009 as harmonized standard, and old standard EN 954-1 was withdrawn on December 31, 2011. So, EU decided to use of EN ISO 13849-1 standard forcibly from January 1, 2012 for safety of machinery. New machines need to be CE marked if they are to be placed on the market in the European Economic Area(EEA), Switzerland or Turkey, and Korean machine builder should apply EN ISO 3849-1 standard for safety of machinery accordingly. However, current Korean Safety Certification system(KCs mark) for dangerous machinery is not referred to EN ISO 13849-1 standard as safety standard. There is a need of research for adaptation of EN ISO 13849-1 standard in Korea as safety standards for new design of safety-related control system which use mostly electronic components. Method: Five case studies of representative designs for safety-related control system in accordance with EN 954-1were selected according to safety category from B to 4. And these five representative designs were tried to change new design in accordance with EN ISO 13849-1 standard. The results of comparison were analyzed in aspect of economy and technical complexity. Results: The results showed that EN ISO 13849-1 provided quantitative method of application and it enabled designers to create safety-related control systems that require fewer components and less wiring, with many of the components being to a lower specification and, therefore, less costly. Conclusion: EN ISO 13849-1 standard is good for electronic safety-related control systems compare to EN 954-1. By considering the importance of application of EN ISO 13849-1 and benefits, the application of EN ISO 13849-1 as safety standard for safety of machinery is urgent in Korea. Application: The results of comparing EN 954-1 and EN ISO 13849-1 standard might help to determine the adaptation of EN ISO 13849-1 standard for safety of industrial machinery in Korea.