• 제목/요약/키워드: Safety Band

검색결과 291건 처리시간 0.03초

Analysis of adjacent channel interference using distribution function for V2X communication systems in the 5.9-GHz band for ITS

  • Song, Yoo Seung;Lee, Shin Kyung;Lee, Jeong Woo;Kang, Do Wook;Min, Kyoung Wook
    • ETRI Journal
    • /
    • 제41권6호
    • /
    • pp.703-714
    • /
    • 2019
  • Many use cases have been presented on providing convenience and safety for vehicles employing wireless access in vehicular environments and long-term evolution communication technologies. As the 70-MHz bandwidth in the 5.9-GHz band is allocated as an intelligent transportation system (ITS) service, there exists the issue that vehicular communication systems should not interfere with each other during their usage. Numerous studies have been conducted on adjacent interfering channels, but there is insufficient research on vehicular communication systems in the ITS band. In this paper, we analyze the interference channel performance between communication systems using distribution functions. Two types of scenarios comprising adjacent channel interference are defined. In each scenario, a combination of an aggressor and victim network is categorized into four test cases. The minimum requirements and conditions to meet a 10% packet error rate are analyzed in terms of outage probability, packet error rate, and throughput for different transmission rates. This paper presents an adjacent channel interference ratio and communication coverage to obtain a satisfactory performance.

제재업의 생물학적인자 노출실태 평가 (Exposure Assessment for Airborne Biological Agents in Sawmills)

  • 박해동;박현희;이인섭
    • 한국산업보건학회지
    • /
    • 제20권4호
    • /
    • pp.274-281
    • /
    • 2010
  • The objectives of this study are (a) to investigate the distribution patterns and exposure concentrations of biological agents in sawmill industries and (b) to compare sampling methods of biological agents. The representative processes of 5 sawmills were selected to measure total airborne bacteria, fungi, endotoxin as well as dust. Airborne bacteria and fungi were measured with one stage impactor, six stage impactor and gelatin filteration methods. Endotoxin was collected with polycarbonate filters and analysed by kinetic chromogenic Limulus Amebocyte Lysate method. Geometric mean levels of airborne bacteria, fungi, endotoxin and dust were 1,864 CFU/$m^3$, 2,252 CFU/$m^3$, 31.5 EU/$m^3$ and 2.4 mg/$m^3$. The ratios of indoor/outdoor concentrations were 3.7 for bacteria, 4.1 for fungi, 3.3 for endotoxin and 9.7 for dust. The respiratory fractions of bacteria were 68.0, 50.9, 49.2 and 45.1% in band-saw, table-saw, rip-saw process and outdoor air. The respiratory fractions of fungi were 78.7, 90.8, 87.5 and 84.8% in band-saw, table-saw, rip-saw process and outdoor air, respectively. There was no significant differences in bacterial concentrations among single stage, six stage impaction and filteration methods. But, fungal concentrations measured with filtration methods were significantly higher than those with impaction methods. Geometric mean levels of airborne bacteria and fungi were higher than the OSHA guideline values of 1,000 CFU/$m^3$. The respiratory fractions of fungi were above 75%. The concentrations of biological agents were significantly different among culture-based sampling methods. In the exposure assessments of biological agents, further studies are needed for the comparisons of diverse sampling methods and the investigations of environmental factors.

447MHz 대역 FSK방식을 이용한 무선 통신 기반 산행 안전을 위한 휴대 시스템 (Portable system module for wireless based on mountain climbing safety using 447 MHz band FSK)

  • 임재돈;김정집;정회경
    • 한국정보통신학회논문지
    • /
    • 제23권11호
    • /
    • pp.1428-1433
    • /
    • 2019
  • 국내 재난 사고의 기술동향 중 산악사고에 대한 관심 또한 지속적으로 증가 추세에 있다. 사고 발생 시 보편적인 방법으로는 스마트폰을 이용한 위치 추적 및 사고신고 등이며, 이를 이용하여 구조 활동을 진행 하고 있으나, 산악지역의 특성상 음영현상의 발생하는 구역에 대한 해결책이 요구되고 있는 실정이다. 이에 본 논문에서는 447 MHz 대역 FSK방식을 이용한 무선 통신 기반 산행 안전 휴대 시스템을 제시하였다. 447 MHz 대역 송·수신기를 이용하여 이상 현상 발생 시 위치 전송 및 구조 신호 전송을 통한 위치좌표 전송 및 데이터를 축적하며, 송신자가 설정된 구역범위의 임계치를 벗어날 경우 위험 경고 알림을 발생하여 위험지역을 신속히 벗어날 수 있는 서비스를 제공한다. 또한 송신자의 건강 상태를 지속적으로 체크하여, 지정된 임계치를 상위 할 경우 수신자에게 경고를 함으로, 송신자의 재난에 대응할 수 있을 것이라고 사료된다.

일반제재업종에서의 작업공정별 재해특성 연구 (A Study on Injury Characteristics by Working Place in the Saw Milling Industry)

  • 이홍석;이관형;김영선
    • 대한안전경영과학회지
    • /
    • 제16권3호
    • /
    • pp.45-54
    • /
    • 2014
  • The average injury rate in sawmilling industry for the last 5 years is 4.99%, which means that more than 200 injuries have occurred in that industry every year. Because the first step in risk assessment is the hazard identification, it is very important to know how to define the hazard and nature of harm. We analyzed 643 accident records of three years(2010-2012) and carried out site survey for the same cases. As a result, the most common types of work at the time of injury in sawmilling industry were removing jammed wood 81(12.8%), wood carrying task 52(8.1%), wood cutting 49(7.6%), travelling table log band saw 41(6.4%), maintenance 37(5.8%) etc. In addition, there were statistically significant differences in some analysis factors such as injured body parts, employment size, and handling material among different working places. Therefore, it is concluded that differentiated prevention efforts are necessary in each workplace.

인가전압에 따른 모의변압기의 HFPD 특성분석 (HFPD Characteristic Analysis of Simulated Transformer According To Applied Voltage)

  • 김덕근;임영삼;임장섭;문채주;이진
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 C
    • /
    • pp.1957-1959
    • /
    • 2000
  • The PD measurement method is very useful to detect insulation degradation. Recently, the HFPD(High Frequency Partial Discharge) measurement testing is widely used in partial discharge measurement of HV machines because HFPD measurement testing receives less influence of external noise and has a merit of good sensitivity. Therefore it is very useful method compare to previous conventional PD testing method and effective diagnosis method in power transformer that requires in-service diagnosis. But partial discharges have very complex characteristics of discharge pattern so it is required continuous research to development of precise analysis method. In this study, simulated transformer is manufactured and HFPD occurred from simulated transformer is measured with broad band antenna and active-line RF measurement system in real time, the degradation grade of transformer is analyzed through produced patterns in simulated transformer according to applied voltages. Also the PD pattern which was measured with EMC analyzer and RF measurement system is compared.

  • PDF

해양레저 안전을 위한 개인 휴대용 전자장치 개발 (Development of Personal Hand-held Electronic Devices for Marine Leisure Safety)

  • 임정빈;남택근
    • 한국항해항만학회지
    • /
    • 제30권5호
    • /
    • pp.357-362
    • /
    • 2006
  • 이 논문에서는 안전한 해양레저 행위를 지원하기 위한 두 가지 개인 휴대용 전자장치 개발 내용을 기술한다. 하나는 조난자를 신속히 민-관-군 동시 다발적으로 수색하기 위한 선박용 9GHz 대역의 일반 레이더 전파에 응답하는 레이더 응답장치이다. 다른 하나는 조난자의 위치를 추적하고 식별할 수 있는 900MHz 스펙트럼 확산 주파수 홉핑 방식의 송수신기와 GPS를 이용한 해상 무선식별장치 개념의 전자장치이다. 해양경찰 함정을 이용한 해상에서의 다양한 현장실험을 통하여 두 가지 장비의 성능을 확인하였다. 그리고 향후 상용화 방안에 대해서 검토하였다.

다물체 동역학 해석기술을 이용한 핸드레일의 슬립특성 개선 (Improvement of Handrail Slippage Characteristics Using Multi-Body Dynamic Analysis Technique)

  • 박찬종
    • 대한기계학회논문집A
    • /
    • 제28권9호
    • /
    • pp.1422-1428
    • /
    • 2004
  • In this paper, computer simulation model of handrail band including pulley-driving system is developed to calculate handrail slippage. This handrail simulation model is validated with test result within operating range and used to predict its slippage behavior with respect to variation of 4 different design parameters considering the applicability into the real handrail system. Based upon this parameter study, optimal condition for handrail slippage improvement is proposed without time-consuming and costly experiments of the real handrail system. And then performance improvement of handrail slippage complied with safety code is achieved after applying the optimal condition into the real handrail band system.

후자린산(Fusaric acid) 생성 Fusarium 종의 신속 검출 PCR (Rapid Detection Method for Fusaric Acid-producing Species of Fusarium by PCR)

  • 이데레사;김소수;;;함현희;이수형;홍성기;류재기
    • 식물병연구
    • /
    • 제21권4호
    • /
    • pp.326-329
    • /
    • 2015
  • 후자린산은 Fusarium이 생성하는 독소로서 다른 Fusarium 독소와 함께 독성을 증진시킬 수 있다. 후자린산 독소를 특이적으로 검출하기 위해 후자린산의 생합성유전자 중 전사인자인 FUB10을 증폭하는 프라이머를 제작하였다. Fub10-f와 Fub10-r 프라이머쌍으로 PCR을 수행했을 때, F. oxysporum, F. proliferatum, F. verticillioides, F. anthophilum, F. bulbicola, F. circinatum, F. fujikuroi, F. redolens, F. sacchari, F. subglutinans, F. thapsinum에서 약 550 bp의 단일밴드가 증폭되었으며 이들은 모두 후자린산을 생성하는 것으로 알려졌다. 반면 트라이코쎄신을 생성하는 종에서는 FUB10 특이 밴드가 증폭되지 않았다. 후자린산은 푸모니신을 생성하는 종에서 함께 생성될 수 있기 때문에 FUB10 프라이머와 푸모니신 생합성유전자인 FUM1 프라이머를 이용한 multiplex PCR을 수행하였다. 그 결과 푸모니신 생성종인 F. proliferatum과 F. verticillioides에서 밴드가 모두 증폭되었으며 이는 두 가지 독소를 생성할 수 있는 종에서 동시 검출이 가능함을 시사하였다.

미취학 어린이의 손씻기 교육에 따른 미생물학적 실태 분석 (Microbiological Effect of Hand Safety after Hand Washing Education for Preschool Children in a Day Care Center)

  • 김지은;문지혜;신현아;이지선;권성희;이정숙;엄애선
    • 한국조리학회지
    • /
    • 제17권3호
    • /
    • pp.141-150
    • /
    • 2011
  • 본 연구는 미취학 어린이를 대상으로 손씻기 교육 방법에 따른 미생물학적 변화를 모니터링한 연구이다. 연구는 3세에서 5세까지의 서울시 어린이집 어린이 10명을 대상으로 수행하였다. 미생물 분석은 손씻기 교육 전, 1주간 동영상 교육실시 후, 1주간 동영상 교육 및 손씻기 실습 교육병행 후로 분류하였다. 손씻기 교육 전 어린이들의 손에서는 일반세균, 진균, 대장균군 및 황색포도상구균이 검출되었다. 2주간 손씻기 동영상 교육과 실습교육을 연속적으로 실시한 결과 손씻기 교육에 따른 손 위생상태는 개선되었다. 결과 손씻기 교육은 취학 전 어린이를 대상으로 손씻기 교육을 반복적으로 수행할 경우 더욱 효과적일 것으로 생각된다. 특히 미취학 아동의 경우 평생 습관을 확립시키는 중요한 시기이므로, 언제, 어디서 손을 씻어야 하는가에 대한 구체적인 교육이 필요할 것으로 생각된다.

  • PDF

소방활동을 위한 밀폐공간 무선통신 측위성능 평가 (The Evaluation of UWB Wireless Communication Position Determination Function in an Enclosed Space for Fire Fighting)

  • 김동현;김충일
    • 한국화재소방학회논문지
    • /
    • 제31권5호
    • /
    • pp.117-122
    • /
    • 2017
  • 밀폐된 공간에서 통신인프라가 파괴될 경우, 긴급 유 무선 통신환경을 구축하여 화재진압 및 소방관 위치확인을 통한 보다 안전한 재난대응환경 확보가 필요하다. 본 연구에서는 Ultra-Wide Band (UWB) 무선통신망을 이용하여 밀폐된 실내 통신환경을 구축하기 위해 6가지 실내환경에 대해 단일 UWB 통신모듈에 대한 통신측위 성능평가를 최대 20 m까지 측정하였다. UWB 통신주파수 각 대역별 6개 채널에 대한 실내환경 통신거리 측정 결과, 개방공간(평균 15.5 m, 최대 20 m), 복도(평균 17.33 m, 최대 20 m), 실내집기류 존치 실내(평균 15.3 m, 최대 20 m), 수직계단(평균 4.33 m, 최대 6 m), 방화문 폐쇄 수평공간(평균 6.5 m, 최대 17 m)으로 나타났다. 이중 7번 채널인 6489.6~1081.6 MHz 주파수 대역에서 통신성능과 거리성능이 가장 우수한 것으로 나타났다. 이에 UWB 통신모듈을 20m 간격으로 설치하고 멀티채널을 이용할 경우 밀폐공간에서 통신환경 구축이 가능한 것으로 판단된다.