• Proceedings of the KIEE Conference
• /
• 2005.11c
• /
• pp.60-63
• /
• 2005

In this paper, the accidents of 6.6kV CV cable using many analysis methods such as a pattern anlysis were analyzed; the inner structure analysis; cross section analysis; SEM; EDX, etc. With the analysis and the accident reconstruction, It was possible to analyze the accident causes. For more correct assessment, another accident reconstruction and simulation with a software were required.

• The Journal of the Korea Contents Association
• /
• v.8 no.4
• /
• pp.247-254
• /
• 2008

This research was conducted to investigate the feasibility of aviation safety technology development. The important subjects of aviation safety technology development, aviation accident prevention and damage reduction technique, aircraft safety certification development, BASA promotion in an aircraft class, were included to investigate the the feasibility of aviation safety technology development. The survey technique using Benefit-Cost Anlysis was performed and the results showed that aviation safety technology development brought scientific technique effect, industrial and economic effect, and the rest effects. Also, the benefits from aviation safety technology development were much greater than the costs.

• Journal of the Korea Safety Management & Science
• /
• v.25 no.3
• /
• pp.45-53
• /
• 2023

In order to solve the rapidly increasing domestic delivery volume and various problems in the recent metropolitan area, domestic researchers are conducting research on the development of "Urban Logistics System Using Underground Space" using existing urban railway facilities in the city. Safety analysis and scenario analysis should be performed for the safe system design of the new concept logistics system, but the scenario analysis techniques performed in previous studies so far do not have standards and are defined differently depending on the domain, subject, or purpose. In addition, it is necessary to improve the difficulty of clearly defining the control structure and the omission of UCA in the existing STPA safety analysis. In this study, an improved scenario table is proposed for the AGV horizontal transport device, which is a key equipment of an urban logistics system using underground space, and a process model is proposed by linking systematic STPA safety analysis and scenario analysis, and UCA and Control Structure Guidelines are provided to create a safety analysis.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.769-772
• /
• 2007

This research was conducted to investigate the economoic effects of aviation safety technology development. The important subjects of aviation safety technology development, aviation accident prevention and damage reduction technique, aircraft safety certification development, BASA promotion in an aircraft class, were included to investigate the economic effects. The survey technique using Benefit-Cost Anlysis was performed and the results showed that aviation safety technology development brought scientific technique effect, industrial and economic effect, and the rest effects. Also, the benefits from aviation safety technology development were much greater than the costs.

• Journal of the Korean Society of Safety
• /
• v.16 no.4
• /
• pp.29-38
• /
• 2001

The purpose of this paper is to evaluate the structural integrity of a reactor pressure vessel subjected to the pressurized thermal shock(PTS) during the transient events, such as main steam line break(MSLB) and small break loss of coolant accident(SBLOCA). For postulated surface or subsurface cracks, variation curves of stress intensity factor are obtained by using the three different methods, including ASME section XI code anlysis, the finite element alternating method and the finite element method. From the stress intensity factor curves, the maximum allowable nil-ductility transition temperatures(RT/NDT/) are determined by the tangent criterion and the maximum criterion for various crack configurations and two initial transient events. As a result of the analysis, it is noted that axial cracks have smaller maximum allowable RT$_{NDT}$ values than same-sized circumferential cracks for both the transient events in the case of the tangent criterion. Axial cracks have smaller RT$_{NDT}$ values than same-sized circumferential cracks for MSLB and circumferential cracks have smaller values than axial cracks for SBLOCA in the case of the maximum criterion.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.24 no.2
• /
• pp.68-73
• /
• 2016

2016, in total 53 corporations operate 160 aircraft. Since 2000, 52 accidents occurred in these corporations. This number takes 20.2% out of in total 257 accidents. Especially in 2016, in two(2) accidents, two(2) aircraft and people onboard were damaged. According to accident reports of aircraft using service, in most cases actions against common sense were connected to accidents. This means that attentions of managers or pilot would have protected accidents. On the basis of such background, this research analyses accidents cases of corporations operating aircraft by utilizing ahp. According to this anlysis, unlike scheduled and unscheduled airlines, pilots in command (0.109) and assisting crew (0.105) in Liveware have taken the most importance. Operational procedure (0.100) in Software and a controlling system (0.086) in Hardware have shown the second most importance. This result demonstrates that in case of corporations operating aircraft require safety management at different level than airlines.

• Journal of rehabilitation welfare engineering & assistive technology
• /
• v.7 no.2
• /
• pp.41-46
• /
• 2013

IIn this paper, active trasfemoral prosthesis leg is designed for the handicapped who lost their legs upon knee. It is important to design proper knee joint to mimic walking motion of hyman. 1 degree-of-freedom active trasfemoral prosthesis leg is designed with knee joint. Operating angle and torque have been calculated using kinematics of three linkages in prosthesis leg. Finite element analysis of major components is performed to evaluate the safety under operating condition and to reduce weights. Minimum volumes of components are obtained by optimization as satisfying safety requirements. The results show that about 35% of weight of components is reduced.

• Geotechnical Engineering
• /
• v.7 no.3
• /
• pp.21-32
• /
• 1991

The purpose of this paper is to develop a reliability model for slope stability of Earth-rockfill dams which accounts for all uncertainties encountered. The uncertain factors of the design variables include the cohesion, the angle of internal friction, and the porewater Pressure in each zone. More specifically, the model errors in estimating those variables are studied in depth. To reduce the uncertainties due to model errors, updated design variables are obtained using Bayesian Theory. For stability analysis, both the two-dimesional stability analysis and the three-dimensional stability analysis where the end effects and the system reliability concept are considered are used for the reliability calculations. The deterministic safety factor by the three-dimensional analysis is lager than that by the two-dimensional anlysis. However, the probability of failure by the three-dimensional analysis is about 3.5 times larger that by the two-dimensional analysis. It is because the system reliability concept is used in the three-dimensional analysis. The sensitivity analysis shows that the probability of failure is more sensitive to the uncertainty of the cohesion than that of the angle of internal friction.

• Journal of the Korean Geotechnical Society
• /
• v.40 no.3
• /
• pp.41-54
• /
• 2024

Regular monitoring plays a crucial role in ensuring the safety of geotechnical structures. Currently, nondestructive methods are employed to monitor such structures to minimize the impact, e.g., sensor-based accelerometers, displacement meters, image-based lasers, and drone imaging. These technologies can observe surface changes; however, they frequently suffer difficulties in terms of identifying changes in internal properties. To monitor changes in internal properties, in situ geotechnical investigations can be employed. A nondestructive test that can be used for this purpose is the spectral analysis of surface wave (SASW) test using geophones. The SASW test is a nondestructive method; however, due to the time required for data interpretation and the difficulty in analyzing the data, it is challenging to use the SASW test for monitoring applications that require frequent observations. However, it is possible to apply the first-step analysis, which yields the dispersion curve, for monitoring rather than the complete SASW analysis, which yields the shear wave velocity. Thus, this paper presents a fundamental study on the phase difference that derives the dispersion curve to utilize the SASW test for monitoring. The reliability of each phase difference interval is examined to determine the boundary to the subjected monitor. The study used phase difference data obtained using a geophone from a single-layered, homogeneous ground site to evaluate reliable boundaries. The findings of this study are expected to improve the utility of monitoring by identifying the ideal boundary for phase difference data.