• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.2
• /
• pp.153-158
• /
• 2005

Recently, as the feasibility study shows that trans-Korea railway and trans-continental railway are advantageous, interest in high-speed railway system is increasing. Because railway vehicle is environment-friendly and safe compared with airplane and ship, its market-sharing increases gradually. KHST(Korean High Speed Train) has been developed by KRRI (Korea Railroad Research Institute) for last 6 years to satisfy the need. An electric railway system is composed of high-tech subsystems, among which main electric equipment such as transformers and converter are critical components determining the performance of rolling stock. We developed a measurement system for on-line test and evaluation of performances of KHST. The measurement system is composed of software part and hardware part. Perfect interface between multi-users is possible. A now method to measure temperature was applied to the measurement system. By using the system, fault diagnosis and performance evaluation of electric equipment in Korean High Speed Train was conducted during test running.

• Journal of Korean Society of Transportation
• /
• v.14 no.4
• /
• pp.77-90
• /
• 1996

Recently existing the road traffic low is requlated by hump standard, which is established throuth the actual england TRRL(Transpodt and Road Research Laboratory) experiment. The determined standard has been utilized, however, wihtout the test on of our street and its drivers driving characteristics. Even with the utilization, the appropriate before and after management, is not constituted. In Spite of minimum speed limit, in many case, the utilization itself is questionalble rather than the purpose of restraining speed limit or reducing vehicle confacts. Along with hump consideration, social attention is focused due to series of personal law suit(traffic accident) field against the negligence of local organization management. Therefore counter measure of safe transportation facility is urgently required. With consideration of above background, the purpose of this research is to develop the hump that is appropriate with our transportation environment. This can be achieved thr ugh analysis of hump effectiveness, examination of drivers awamess, facilitation/management problems, and various problems in verticle acceleration.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.346-348
• /
• 1997

This paper presents microprocessor-based real-time speed and position detection by inductive radio loop in new transportation system, such as magnetically levitated train system, rubber tyred train, and linear-motor car. The constant elapsed time method is used in this study for high accurate detection over a wide speed range. And for reliability and safety of the system, it is duplicated and data-bus level comparison is performed by fail-safe comparator.

• Proceedings of the KSR Conference
• /
• 2001.05a
• /
• pp.147-154
• /
• 2001

Dynamic behavior of high speed train is very important because the high speed train should be safe and satisfied with the ride comfort. An eddy current brake system is mounted on trailer bogie and wheelset. The eddy current braking force longitudinally exerts on the articulated trailer bogie and the attraction force vertically exerts on the wheelset. Because a frame of eddy current brake system is flexible, these forces generate the vertical vibration at middle point of the frame. Also, the vibration change the vertical clearance between an electromagnet and top of rail which affect the magnitude of braking and attracting forces. Therefore, the dynamic behavior of the eddy current braking system must be predicted for design the dynamic characteristic of its mounting system when normally operate on rail which have irregularity. Vampire program is used for Prediction of the dynamic behavior of an eddy current braking system.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1282-1288
• /
• 2006

Upon demands for the requests of rapid, safe and comfort transit, the proven high speed bogie having not only high-quality but also good running performance is required by customer all over the railway vehicle for narrow gauge. Hereupon, the running test on roller testing rig for developed semi-high speed bogie for narrow gauge was carried out in order to verify the running performance and safety. The aim of the test is to assess the dynamic behaviour of the bogie on straight track including the running stability, ride quality, modal frequency and dynamic response.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.832-837
• /
• 2006

ATC facility manipulates ground-on-board information, which transmits speed limit, varying as wayside environments - safety facility, track gradient, inclination, bridge and tunnel and other factors, installed for safe operation of trains on wayside. Efficientiation and automatification of operation and maintenance is being realized, by measuring if there are any erroneous information, using a measuring car. In this paper, we study in priority the methods for measuring accurately distinctive properties of internal malfunctions of track circuits, the performance decrease of condensers, and the unbalance of return cables, which are actually required for functionality improvement of high-speed line signal measure facilities, by measuring the unbalance of return current given because of damaged factors of external track circuits.

• The Korean Journal of Emergency Medical Services
• /
• v.19 no.2
• /
• pp.29-38
• /
• 2015

Purpose: The purpose of this study was to improve airway management ability by comparing the speed, angle of the neck, and confidence and ease of supraglottic airway laryngopharyngeal tube (SALT) and endotracheal intubation via direct laryngoscopy. Methods: The subjects of this experimental research study with a randomized crossover design were 44 emergency medicine technician - paramedics working in the fire department of 'J' - do. SPSS version 19.0 was used in the statistical analysis. Results: Speed and angle of the neck (p<.001), as well as confidence and ease (p<.001), showed significant differences between endotracheal intubation with a SALT and endotracheal intubation via direct laryngoscopy. Conclusion: If endotracheal intubation via direct laryngoscopy is difficult to use or in trauma patients, using a SALT is safe and enables fast intubation. Moreover, in order to improve the efficiency of advanced airway management, the application of SALT should be introduced in the domestic scene.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.17 no.2
• /
• pp.167-174
• /
• 2015

Since about 70 percent of the territory is mountainous, more tunnels are constructed in Korea for maximizing the development efficiency. With the increasing number of tunnel construction, safe construction in tunnels has been emerged as the utmost important subject. Recently, the number of long tunnel construction is steeply increased because of the request for high speed and straight road. In this study, a safe tunneling method using numerical modeling of rock blocks in long tunnels is proposed, and then applied to the long tunnel based on real discontinuity information observed in situ. It is possible to detect key blocks all along the tunnel exactly by using the numerical analysis program developed for the safe tunneling method using numerical modeling of rock blocks. This computer simulation method with user-friendly interfaces can calculate not only the stability of rock blocks but also the design of supplementary supports.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2005.10a
• /
• pp.5-10
• /
• 2005

T.S. HANBADA will navigate to maintain the adequate distance between own ship and other ships safely for about 17 hours on the about 2 kts. On the above situation, M broadcasting station requires to maintain the distance from 100m to 500m between ships. This paper aims to calculate the minimum safe distance between ships, the distance is assessed by using ES Model which is a quantitative model for evaluating the difficulty of shiphandling. After marine traffic flow simulation, minimum safe distance for HANBADA on the 2kts is about 260m based ES value. On this paper, the result was compared about its distance to the actual navigating distance.

• Journal of Mechanical Science and Technology
• /
• v.20 no.9
• /
• pp.1492-1501
• /
• 2006

A transportation system of single wafer has been developed to be applied to semiconductor manufacturing process of the next generation. In this study, the experimental apparatus consists of two kinds of track, one is for propelling a wafer, so called control track, the other is for generating an air film to transfer a wafer, so called transfer track. The wafer transportation speed has been evaluated by the numerical and the experimental methods for three types of nozzle position a..ay (i.e., the front-, face- and rear-array) in an air levitation system. Test facility for 300mm wafer has been equipped with two control tracks and one transfer track of 1500mm length from the starting point to the stopping point. From the present results, it is found that the experimental values of the wafer transportation speed are well in agreement with the computed ones. Namely, the computed values of the maximum wafer transportation speed $V_{max}$ are slightly higher than the experimental ones by about $15{\times}20%$. The disparities in $V_{max}$ between the numerical and the experimental results become smaller as the air velocity increases. Also, at the same air flow rate, the order of wafer transportation speeds is : $V_{max}$ for the front-array > $V_{max}$ for the face-array > $V_{max}$ for the rear-array. However, the face-array is rather more stable than any other type of nozzle array to ensure safe transportation of a wafer.