• 제목/요약/키워드: Safe position

검색결과 319건 처리시간 0.028초

흉강경시 $CO_2$에 의한 혈역학적 영향 (Hemodynamics Effects of $CO_2$ Insufflation During Thoracoscopy)

  • 손동섭;원경준
    • Journal of Chest Surgery
    • /
    • 제29권7호
    • /
    • pp.723-727
    • /
    • 1996
  • 흉강경수술시 적 절한 수술시야를 확보하는 것이 가장 중요하다. 이때 이산화탄소를 주입하여 폐를 허 탈시키고 환자의 위 치를 변경함으로서 수술 시야를 좋게 할 수 있다. 그러나 최근 보고에 의하면 돼지에 서 흥강경 시행시 이산화탄소를 주입하여 좋지 않은 혈역학적인 변화가 일어날 수 있다고 보고하고 있 다. 그래서 본 저자는 흥강경을 시행한 12명의 환자를 대상으로 조작전, 일측환기시, 흥강내압이 SmrnHg, 10minHg, 15rnrnHg 변화시 평균혈압, 심박동수, 중심정맥 압, 동맥산소포화도, 환기말이산화 탄소분압등의 혈역학적 인 변화를 조사하여 다음과 같은 결과를 얻었다. 1. 조작전 기준치와 일측폐환기시 및 흥강내압 변화시 측정한 평균혈압, 심박동수, 동맥산소포화도 사이 에 유의한 변동이 없었다. 2. 환기말 이산화탄소 분압은 기준치 31.00$\pm$1.67mmHg 에서 흥강내압 15 mmHg증가시 38.49$\pm$1.82 mmHg(p<0.05) 로의 변화가 관찰되었다. 3. 중심정맥압은 기준치 7.75$\pm$0.76 minHg 에서 흥강내압 10mmHg 증가시 12.83$\pm$1.64minHg, 15 mmHg 증가시 16.16$\pm$ 1.97 mmHg(p<0.05)로 의미있는 변화가 관찰되 었다 4. 흥강경수술시 혈역학적 변화없이 \ulcorner술시야를 확보하기 위한 이산화탄소압력은 10mmHg이하가 적당 할 것으로 생각한다.

  • PDF

Radar Target Extractor에 의한 선박운동정보의 추출에 관한 연구 (Extraction of the ship movement information by a radar target extractor)

  • 이대재;김광식;변덕수
    • 수산해양기술연구
    • /
    • 제38권3호
    • /
    • pp.249-255
    • /
    • 2002
  • 소형 레이더 신호를 정량적으로 분석하여 해상물표의 운동정보를 실시간으로 추출 및 표시하기 위한 radar target extractor(RTX)를 개발하고, 이 장치를 소형 레이더 장치에 부착시켜 소형 연근해 어선에서도 타선의 진운동정보나 충돌회피정보와 같은 각종의 항해정보를 활용토록 하기 위한 연구를 수행하였다. 본 연구에서 개발한 RTX는 IBM PC 의 ISA bus를 통해 데이터를 입출력할 수 있도록 설계된 신호처리장치로서, 일반 선박용 레이더에서 출력되는 video signal, trigger, antenna bearing pulse, antenna heading mark를 직접 입력할 수 있도록 하였다. 이 장치는 레이더 펄스신호가 해상에 존재하는 물표로부터 반사되어 수신될 때, 그 물표의 신호정보 및 위치좌표정보를 PC 의 CPU 에 의해 처리하지 않고 RTX 자체에 내장된 전용 DSP를 이용하여 실시간으로 처리하도록 하였다. 이 장치에 서 video 신호는 analog devices 사의 AD9042 (12 bit, 40 MHZ monolithic A/D converter)를 이용하여 digital 신호로 변환되고, 그 화상 신호는 CRT에 PPI 방식으로 표시되었다. 이 때 안테나가 회전하면서 탐지한 레이더 물표의 echo 신호는 echo 신호의 강도가 증가하면서 다른 물표의 위치와 구별되면 하나의 물표로서 판정한다. 이 경우, 표적식별 알고리즘은 물표가 미리 설정한 물표포착영역(target acquiring zone)내에 있고, 해당 물표의 크기와 다른 물표와의 거리등에 대한 데이터가 식별기준을 만족하는가에 대한 처리를 수행하도록 개발되었다. 본 연구는 현재 소형어선에 탑재되고 있는 소형레이더의 성능 향상에 크게 기여할 것으로 판단되고, 또한 소형어선용 저가형 ARPA 시스템의 국산화에 필요한 기반기술을 제공할 수 있을 것으로 판단된다.

석유화학공장의 염화수소 누출사고를 통한 대기벤트 시스템의 안전성 향상 방안 (A Study on the Safety Improvement in a Venting System from the HCl Release Accident of a Petrochemical Company)

  • 마병철;이근원;임지표;김영철
    • 한국가스학회지
    • /
    • 제16권4호
    • /
    • pp.38-43
    • /
    • 2012
  • 이 논문은 2008년 5월 H석유화학에서 발생한 염화수소 누출사고에 대한 염화수소 누출량 및 피해범위를 정량적으로 산정하고 예방대책을 제시하는데 그 목적이 있다. 염화수소 Column의 안전밸브를 통해 누출된 양은 안전밸브 배출용량, 이상상태방정식 및 기계적 에너지 수지 식을 사용하여 계산한 결과, 최소한 76.8 kg의 염화수소가 누출된 것을 알 수 있었다. 또한, PHAST 등의 프로그램을 활용하여 안전밸브 설치 지점(높이 24 m)으로 부터 약 350 m 떨어진 곳에서의 염화수소 농도를 예측한 결과, 지표면 누출로 가정하여 계산하는 ALOHA 및 K-CARM 프로그램에서는 각각 304 ppm과 1,700 ppm로 예측되었고 누출 높이에서의 지표면 값을 계산하는 PHAST 프로그램에서는 1 ppm 이하로 예측되었다. 위 결과는, 사고당시 염화수소가 안전밸브를 통해 최소 76.8 kg이 누출되었고 누출지점으로부터 약 350 m 떨어진 곳에 있던 근로자들이 1 ppm 이하의 농도의 HCl 가스에 폭로되었음을 말해준다. 또한, 이러한 사고를 예방하기 위해서는 염화수소와 같은 독성물질은 스크러버 등을 거쳐 세정 후 안전하게 대기로 배출(방출) 시켜야 한다는 사실을 제시한다.

실시간 DGPS를 이용한 헬리콥터 착륙 시스템 개발 (Flight Test of Helicopter Landing System Using Real-time DGPS)

  • 박성민;김정한;황덕호;장재규;기창돈;박형택;박홍만;이창효
    • 한국항행학회논문지
    • /
    • 제3권2호
    • /
    • pp.108-119
    • /
    • 1999
  • 최근 수년간, GPS와 관련된 연구들이 항공분야를 비롯한 다양한 분야에서 진행되었다. 특히, GPS를 항공기의 착륙 유도 시스템에 이용하려는 연구가 많이 이뤄지고 있다. 이러한 시도들은 GPS의 경제성, 신뢰성, 정확성 등의 장점들을 십분 활용하기 위한 것이라고 할 수 있다. 서울대학교 GPS 실험실에서도 이러한 경향에 보조를 맞추어, GPS를 기반으로 하는 항공기 착륙 시스템을 개발하고, 헬리콥터를 이용한 비행실험을 수행하고 있다. 그 동안 누적된 실시간 DGPS 시스템 개발기술들을 바탕으로 항공기 착륙 시스템을 확장, 보강하여 최근의 비행실험을 실시하였다. 본 논문에서는 새롭게 구성된 항공기 착륙 시스템을 소개하고 이를 이용한 비행실험 결과를 분석하였다. 기존의, 기본적인 실시간 DGPS 시스템에서 추가, 발전된 부분은 세 가지로 분류할 수 있다. 첫 번째는, 단일 GPS 안테나를 이용하여 항공기의 자세를 추정하는 부분이고, 두 번째는, 통합적인 cockpit display이다. 이 display는 가상현실을 이용하여 조종사에게 기존의 ILS 정보와 그 이외의 다양한 정보들을 보여준다. 마지막으로, 공항의 기상상태에 관계없이 조종사가 공항에 접근할 수 있도록, 전자지도를 삽입하여 안전한 착륙을 시도할 수 있도록 시스템을 구성하였다. 이렇게 새롭게 구성된 시스템을 이용하여 김해 국제공항에서 비행실험을 수행하였다. 분석된 결과를 바탕으로, 이 시스템이 정확도 측면에서, CAT-I을 충분히 만족시킴을 확인하였으며, 신뢰도 높은 자세결정이 이뤄지고 있음을 확인하였다.

  • PDF

1차 포장이 이침의 침첨 불량에 미치는 영향 (The effect of initial packaging on the deformation of ear acupuncture needle tips)

  • 최광호;권오상;이상훈;조성진;이새봄;연선희;최선미;류연희
    • 한국한의학연구원논문집
    • /
    • 제18권3호
    • /
    • pp.87-93
    • /
    • 2012
  • Objectives : The present study is to verify whether the deformation of ear acupuncture needle tips that are currently on the market is caused during the process of initial packaging. Methods : Ear acupuncture needles distributed from three different companies were collected to measure the size of the groove on the transparent plate which is used in for the intial packaging. Then the tolerance range for off-centered tips, which represent the range of the groove size that is safe from damaging the needle tip, was determined based on the vertical length measured from tip to handle. 200 ear acupuncture needles were dipped in alcohol and scanned to confirm the position of the needles. Stereo-microscope was used to observe the needle tips that were located outside the tolerance range. Results : The increased number of ear acupuncture needle tips placed outside the tolerance range were seen from in the order of C company, A company and B company. The increased deformation of the needle tips caused by initial packaging was observed in the order of A company, C company and B company. Conclusion : Only the ear acupuncture needles from B company showed the strong correlation between needle tip deformation and initial packaging. It has been observed that the deformation of the ear acupuncture needles is mainly due to manufacturing process, not the packaging process.

좁은 치조골에서 사다리꼴형 디자인으로 개발된 단폭경임플란트의 증례 보고 (Case report of a newly designed narrow-diameter implant with trapezoid-shape for deficient alveolar bone)

  • 이사야;고미선;고석영;윤정호
    • 대한치과의사협회지
    • /
    • 제56권5호
    • /
    • pp.263-276
    • /
    • 2018
  • Long-term survival and prognosis of narrow-diameter implants have been reported to be adequate to consider them a safe method for treating a deficient alveolar ridge. The objective of this study was to perform case report of narrow-diameter implants with a trapezoid-shape in anterior teeth alveolar bone. A 50-year-old male patient presented with discomfort due to mobility of all of the maxillary teeth and mandibular incisors. Due to destruction of alveolar bone, four anterior mandibular teeth were extracted. Soft tissue healing was allowed for approximately 3 months after the extraction, and a new design of implant placement was planned for the mandibular incisor area, followed by clinical and radiological evaluation. Implant placement was determined using an R2GATE surgical stent. The stability of the implants was assessed by ISQ measurements at the first and second implant surgery and after prosthetic placement. At 1 and 3 months and 1 year after implantation of the prosthesis, clinical and radiological examinations were performed. Another 50-year-old male patient presented with discomfort due to mobility of the mandibular central incisors. For the same reason as in the first patient, implant placement was carried out in the same way after extraction. ISQ measurements and clinical and radiological examinations were performed as in the previous case. In these two clinical cases, 12 months of follow-up revealed that the implant remained stable without inflammation or additional bone loss, and there was no discomfort to the patient. In conclusion, computer-guided implant surgery was used to place an implant in an optimal position considering the upper prosthesis. A new design of a narrow-diameter implant with a trapezoid-shape into anterior mandibular alveolar bone is a less invasive treatment method and is based on the contour of the deficient alveolar ridge. Through all of these procedures, we were able to reduce the number of traumas during surgery, reduce the operation time and total treatment period, and provide patients with more comfortable treatment.

  • PDF

새송이버섯 재배사의 환경요인 분석 (Analysis of Environment Factors in Pleurotus eryngii Cultivation House)

  • 윤용철;서원명;이현우
    • 생물환경조절학회지
    • /
    • 제12권4호
    • /
    • pp.200-206
    • /
    • 2003
  • 본 연구에서는 새송이버섯을 중심으로 품질향상 및 생산량 증대를 목적으로 적정재배사의 구조설계 및 환경조절 기술을 개발 ${\cdot}$ 보급하기 위하여 서부 경남지역의 새송이버서 재배농가를 중심으로 재배사의 구조 및 환경조절장치를 조사하였다. 또한 환경조절실태를 조사하기 위하여 농가에 위치한 2개 동의 상업용 버섯재배사를 대상으로 환경인자를 계측하였다. 본 연구에서는 이들 연구 중 환경인자 계측결과를 분석하였다. 실험기간동안 외기온은 평년과 큰 차이가 없었으나, 재배사 내부의 온도가 설정온도보다 다소 낮게 유지되고 있기 때문에 진주지역의 동절기 최저 외기온을 고려하면, 난방기 용량이나 배관에 문제가 있는 것으로 판단되었다. 난방 시 상하 재배상간 온도차가 최대 2~3$^{\circ}C$ 정도로 높게 나타나 높이별 온도분포가 일정하지 않을 뿐만 아니라 또 최하단 재배상에서 균상이 지나치게 건조하게 되어 버섯의 발이가 잘 되지 않는 등의 문제도 종종 발생하였다. 그리고 상대습도는 재배 기간 동안 변화가 심하고, 평균상대습도도 일반적으로 알려져 인ㅅ는 것보다 발이기나 생육기에 모두 다소 높거나 낮게 유지되는 등 습도유지가 일정하지 않은 것을 알 수 있었다. 탄산가스 농도도 권장농도보다 높게 유지되는 등이 문제가 있었다. 조도는 권장조도보다 전반적으로 낮게 유지되고 있음을 알 수 있었다. 또한 버섯의 수확량은 평균적으로 병당 약 67~85 g 정도로 나타났고, 총 판매금액은 균상 구입비의 2배 이사인 것으로 조사되었다.

무선통신기반 열차제어시스템에서의 운전시격 계산과 간격제어 성능개선을 위한 열차간격제어 알고리즘 (Headway Calculation and Train Control Algorithm for Performance Improvement in Radio based Train Control System)

  • 오세찬;김경희;이성훈;김자영;전종화
    • 한국산학기술학회논문지
    • /
    • 제16권10호
    • /
    • pp.6949-6958
    • /
    • 2015
  • 무선통신기반 열차제어시스템은 관할영역 내에 운행 중인 열차의 위치정보를 지상시스템에서 실시간으로 수신하고 다시 각각의 열차의 차상시스템에 새로운 이동권한을 제공함으로써 안전한 간격제어를 수행한다. 열차제어시스템의 성능은 최소 운전시격으로 평가되며 그것은 열차제어시스템의 간격제어 성능뿐만 아니라 운영특성 그리고 열차의 특성을 반영하여 계산된다. 본 논문은 무선통신기반 열차제어시스템의 운전시격 계산과 운전시격을 개선하기 위한 새로운 열차간격제어 알고리즘을 제안한다. 제안된 운전시격 계산 방법은 열차제어시스템 간격제어 성능을 반영한 안전마진 추정을 통해 각각 역간 운전시격과 역 운전시격을 정의한다. 또한 제안된 열차간격제어 개선 알고리즘은 간격제어 개선을 위해 거리와 속도를 포함하는 이동권한을 새롭게 정의하며 선행열차에서 필연적으로 발생하는 제동거리를 이용함으로써 열차의 운전시격을 향상시킬 수 있다. 제안된 운전시격 계산방법을 한국형 무선통신기반 열차제어시스템의 간격제어 성능을 대상으로 시뮬레이션을 수행하며 개선된 열차간격제어 알고리즘과 비교분석 한다. 시뮬레이션 결과에 따르면 제안된 운전시격 계산방법은 향후 무선통신기반 열차제어시스템의 성능 지표로 활용이 가능하며 제안된 간격제어 알고리즘은 기존의 무선통신기반 열차제어시스템의 역 운전시격과 역간 운전시격을 개선할 수 있음을 확인한다.

극한지 탐사 로버의 카메라 시스템 설계를 위한 시뮬레이션 기법 개발 (Development of Simulation Method to Design Rover's Camera System for Extreme Region Exploration)

  • 김창재;박재민;최강혁;신휴성;홍성철
    • 한국산학기술학회논문지
    • /
    • 제20권12호
    • /
    • pp.271-279
    • /
    • 2019
  • 극한환경 지역에서 무인 로버는 다수의 센서와 장비를 탑재하고 인간을 대신해 장기간 탐사 임무를 수행하기 위해 개발된다. 하지만 혹독한 기상과 거친 지형조건을 가진 극한환경 지역에서 로버 카메라 영상은 제한된 가시거리와 시야각을 가지므로, 카메라들은 안전한 원격 주행과 효율적 지형정보 구축을 위해 배치되어야 한다. 이에 본 연구에서는 로버 설계 도면을 기반으로 한 카메라 배치 시뮬레이션을 수행함으로써, 향후 로버 카메라 시스템 제작을 위한 시간과 비용을 최소화 하고자 하였다. 제안한 로버의 카메라 시스템은 총 8대의 카메라가 탑재되며, 기능적 요건에 따라 탐사 및 주행 카메라로 분류 된다. 카메라 배치 시뮬레이션에서는 카메라들의 위치와 경사 각도를 변경하여 가상의 지형을 촬영한다. 로버 카메라의 최적 배치는 가상 지형영상의 가시거리 및 중첩도, 지형 데이터의 정확도 등을 비교 및 분석하여 결정하였다. 카메라 배치 시뮬레이션 결과는 실제 로버 제작에 반영될 예정으로, 향후 극한환경지역을 모사한 모의지형을 구축하고 로버 성능을 종합적으로 평가하여 로버 카메라 시스템의 성능을 개선할 예정이다.

안저골절 정복술 후 풍선 달린 카테터와 방사선조영제의 이용 (Reconstruction of the Orbital Floor Fracture using the Antral Balloon Catheter with Radiopaque Dye)

  • 최환준;이한정;양형은;이영만
    • Archives of Plastic Surgery
    • /
    • 제37권1호
    • /
    • pp.99-103
    • /
    • 2010
  • Purpose: Blow-out fractures are reduced through transcutaneous or transconjunctival incisions. But the field of orbital surgery is difficult due to lack of visualization of fracture site, blind dissection of orbital floor, susceptibility of injury of orbital structures. In these situations, the former technique of using an antral balloon catheter has advantages over other methods for reconstruction because of its rapidity, simplicity, and inexpensiveness. Furthermore, the antral balloon catheter allows not only elevation of the orbital bone fragment but also expansion of the maxillary sinus in cases where there is a fracture of its walls. But postoperative follow-up method using computed tomography is expensive. Hence, we report a simple and inexpensive follow-up method using radiopaque dye inflation. Methods: We performed endoscopic transantral approach in 5 cases of blow-out fracture under general anesthesia. To accomplish this technique, a rigid 4 mm, 0 or 30 degree angled endoscopy was inserted into the maxillary sinus. Inflation of the catheter started gradually, with 10 to 15 mL of saline mixed radiopaque dye (saline: dye, 5 : 1) by syringe and while observing the elevation of the fracture site with endoscope until a proper contour was reached. For the maintain of the position of fractured site, 12 French urinary balloon foley catheter were used in fracture site for 7 - 10 days. Results: Postoperative assessment was performed by means of clinical and simple radiographic examination to secure the catheter under the inferior orbital wall and in the maxillary sinus. No specific complications occurred related to this procedure. Results of the surgery and follow-up in all cases were satisfactory. Conclusion: It may be a better alternative to the conventional follow-up method, with less cost and effectiveness of the catheter patency. The advantages of using the urinary balloon foley catheter with the radiopaque dye include the following : it is safe, efficacy, simple, and especially low cost. On drawback of this method is the discomfort to the patient caused by the catheter during the treatment.