• 한국생산제조학회지
• /
• 제22권2호
• /
• pp.199-205
• /
• 2013

Stress and deformation on forklift happened at loading, unloading or moving freight are studied by structural and fatigue analysis in this study. As model 1 as closing type between forks has lower stress and stain than model 2 at opening type, model 1 has more durability than model 2. Among the cases of nonuniform fatigue loads, 'SAE bracket history' with the severest change of load becomes most unstable but 'Sample history' becomes most stable. In case of 'SAE bracket history' with the severest change of load at model 1 and 2, maximum life is shown with Cycle. Minimum damage with 854 at model 2 becomes much higher than model 1. As the gap between forks becomes open, the damage probability becomes higher. The structural result of this study can be effectively utilized with the safe and stable design of forklift by investigating prevention and durability against its damage.

• 한국화재소방학회논문지
• /
• 제3권2호
• /
• pp.11-19
• /
• 1989

In this study, the independent variables are the floor plan configulation. The dependent variables are the occupant's egress behavior, especially spatial movement pattern, and life - safety performance of building. Fire events were simulated on single story of office building. Simulation run for allowable secaping thime(180 seconds) arbitrarily selected, and involved 48 occupants. The major findings Pre as follows. 1) Computer simulation model suggested in this study can be used as the Preoccupancy evaluation method of the life-safety performance for architectural design based on prediction of occupants' egress behavior in the levels of validity and sensitivity, 2) Sucess or failure in occupants' escape is determined by decreasing walking speed caused by jamming at exits or over crowded corridor, and increasing route length caused by running about in confusion at each subdivision and corridor. 3) In floor plan configuration which safe areas located at the extreme ends of the corridor, cellular floor planning have to be avoided preventing jamming and running about in confusion at overcrowded corridor.

• 한국실내디자인학회논문집
• /
• 제24권3호
• /
• pp.186-196
• /
• 2015

This research comprehended the fundamental cause of elderly nursing home residents' negative feelings of loneliness, depression, fear, and loss of self-usefulness as existential issue, since they already went through loss, death of loved ones, geriatric disease and disability. The purpose of this research is to explore how existentialism and existential psychotherapy theory of Irvin D. Yalom can be applied to nursing home environment design, and to suggest design directions. Based on his framework of human's ultimate interest, death, freedom followed by responsibility, isolation, and meaninglessness, interior design suggestions and applicable spaces were presented. Four cases from Australia, Denmark, Japan and Korea were analyzed according to design suggestions to grasp the current situation and to draw further proposition. The conclusions are as follows. (1)Environment should support nursing home residents to resolve existential issues. (2)Death is the least supported issue on all of the cases. Environmental elements that can induce residents to think and discuss on death, hospice program and space for memorial service is necessary. (3)Regarding to freedom, the environment should support resident's disability to maintain independence as much as possible and residents autonomy and decision should be respected. Single/double rooms, motorized bed, free and safe usage of kitchen and garden are necessary. (4)For isolation, Space and time for meditation should be provided. (5)To find meaning of life, environment should support residents in both physical and cognitive aspect so that they can contribute to others. Space for hobby is necessary for continued creativity and self-realization.

• 한국실내디자인학회논문집
• /
• 제26권1호
• /
• pp.53-62
• /
• 2017

It is very important for the elderly to maintain their independence and to live safe and comfortable daily lives in order to lead an independent life. The bathroom in the house has the greatest number of fall accidents and has a great influence on the independence of the elderly. Therefore, the purpose of this study is to develop a bathroom design method that improves the independence of the elderly whose physical function is deteriorated through preventing falls. In this study, first of all, we investigated the causes of falling in bathrooms based on the previous studies, and identified the intelligent services that can prevent falls and selected them according to individual needs. Secondly, we investigated the bathroom size of the apartment among the various housing type, analyzed the type of the bathroom, and developed a standard type of the bathroom. Thirdly, we analyzed the design guidelines for the elderly residents in Korea and proposed improvement directions. We also divided the intelligent sanitary appliances and fall-prevention products and proposed the installation method and directions. Therefore, the comprehensive bathroom design standards and proposals proposed in this study will be the basis of bathroom design to prevent falls and improve independence of the elderly, and it will be easy to understand and help the designer in designing. Finally, this study is meaningful in that it provides independence of the elderly through fall prevention and increases the easiness of hygiene action and suggests direction to maintain self-sustaining life of the elderly.

• 한국강구조학회 논문집
• /
• 제13권2호
• /
• pp.211-221
• /
• 2001

본 연구에서는, 포장가속시험시설이 사용 중 발생 가능한 동역학적 힘을 예측하기 위해, 이미 개발되어 운용중인 모형시험시설을 이용하여 차량 운동방정식을 구하고, 모형시험시설과 포장가속시험시설(KALES : Korea Accelerated Loading and Environmental Simulator)의 상사관계를 이용하여 KALES가 운행 중 발생할 수 있는 동역학적인 힘을 예측하였다. 이를 기반으로 실제 차량 구조부 형상에 대한 상세설계를 전산해석과 피로수명평가 방법을 이용하여 수행하였다. 해석 결과, 동역학적 모형화 및 피로강도 해석기술을 기반으로 설계된 KALES는 시험 중 발생되는 사용하중 이력에 대해서 피로 강도적으로 충분한 안전성이 확보되도록 설계됨을 확인할 수 있었다.

• 대한기계학회논문집A
• /
• 제36권10호
• /
• pp.1275-1282
• /
• 2012

헬리콥터 로터 시스템은 동적인 하중이 부가되는 구조물로서 복합재료로 제작된 주로터 및 꼬리로터 블레이드를 포함하고 있으며, 복합재료의 피로특성은 내구성과 신뢰성이 우수한 로터 블레이드를 설계하고 제작하기 위해 매우 중요한 요소라 할 수 있다. 최근까지 안전수명 개념을 기반으로 동적인 하중이 부가되는 복합재 구성품의 피로수명을 평가해왔으나, 제작공정 중 발생 가능한 결함과 운용 중 외부물체의 충돌로 인한 강도저하 현상을 적합하게 고려할 수 없는 단점이 있었다. 손상허용 개념을 통해 이와 같은 단점들은 극복할 수 있으나, 현재까지 효율적이며 경제적으로 적용할 수 있는 방법이 제시되지 못하고 있다. 내결함 안전수명 개념은 손상허용 개념과 마찬가지로 결함과 손상의 영향을 고려할 수 있으며, 민수 또는 군용헬기에 대해 적용이 가능하다. 따라서 본 논문에서는 결함과 손상이 적용된 복합재 로터 블레이드에 대해 내결함 안전수명 개념을 이용하여 피로시험을 수행하는 방법과 시험데이터를 이용한 피로수명 평가 절차를 제시하였다.

• 한국융합학회논문지
• /
• 제6권6호
• /
• pp.279-284
• /
• 2015

항공기의 추력으로 구동되는 추진축의 회전운동에서 발생되는 진동은 추진축의 수명에 큰 영향을 끼친다. 그리고 회전중 추진축에서 피로파괴가 발생하게 될 시에, 막대한 인명피해를 야기하게 된다. 비행환경에 따라 다양한 회전에 놓이게 되는 추진축에서 떨림이 발생한다. 따라서 이러한 피로파괴가 우려되는 추진축 부위를 본 논문에서는 해석적 연구를 통해 사전에 파악함으로서, 파손방지를 위한 그 내구성이 향상되고 근간된 안전설계를 토대로 융합기술에 접목하여 그 미적인 감각을 나타낼 수 있다.

• Journal of Welding and Joining
• /
• 제29권1호
• /
• pp.46-51
• /
• 2011

TSV technology raises several reliability concerns particularly caused by thermally induced stress. In traditional package, the thermo-mechanical failure mostly occurs as a result of the damage in the solder joint. In TSV technology, however, the driving failure may be TSV interconnects. In this study, the thermomechanical reliability of TSV technology is investigated using finite element method. Thermal stress and thermal fatigue phenomenon caused by repetitive temperature cycling are analyzed, and possible failure locations are discussed. In particular, the effects of via size, via pitch and bonding pad on thermo-mechanical reliability are investigated. The plastic strain generally increases with via size increases. Therefore, expected thermal fatigue life also increase as the via size decreases. However, the small via shows the higher von Mises stress. This means that smaller vias are not always safe despite their longer life expectancy. Therefore careful design consideration of via size and pitch is required for reliability improvement. Also the bonding pad design is important for enhancing the reliability of TSV structure.

• International Journal of Concrete Structures and Materials
• /
• 제3권2호
• /
• pp.103-110
• /
• 2009

Concrete carbonation is a cause of problems in concrete structures, so it needs to be estimated. And concrete cover is designed to protect structures from this damaging. Usually the cover thickness is considered based on the limit states design codes in which the important target is the reliability safety index. However, it is not clear that whether the safety index determined is optimal or not with respect to the cost. The codes are mainly proceeded quantitatively (i.e. making a safe structure) while the economic aspects are only considered qualitatively. So the reliability-based design considering life cycle cost (LCC) is called for, and here the focus is on the advanced analysis solution to optimize the reliability safety regarding LCC.

• 항공우주시스템공학회지
• /
• 제2권2호
• /
• pp.1-7
• /
• 2008

Recently the wind energy has been alternatively used as a renewable energy resource instead of the mostly used fossil fuel due to its lack and environmental issues. This work is to propose a structural design and analysis procedure for development of the low noise 100W class small wind turbine system which will be applicable to relatively low speed region like Korea and for the domestic use. Structural analysis including load cases, stress, deformation, buckling, vibration and fatigue life was performed using the Finite Element Method, the load spectrum analysis and the Miner rule. In order to evaluate the designed structure, the structural test was carried out and its test results were compared with the estimated results. In addition, the blade should be safe from the impact damage due to FOD(Foreign Object Damage) including the bird strike. In order to analize the bird strike penomena on the blade, MSC. Dytran was used, and the applied method Arbitrary Lagrangian-Eulerian was evalud by comparison with the previous study results.