• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.5
• /
• pp.565-572
• /
• 2009

Hydraulic modeling is widely used to simulate wastewater flow. The simulated models are used to prevent flood and many other problems associated with wastewater flow in planning or rehabilitating sewer systems. In this study, MAKESW (An engineer, South Korea), MOUSE (DHI, Denmark), and SWMM (XPSoftware, USA) are used to for hydraulic modeling of wastewater in C-city, South Korea and E-city, Iraq. These modeling tools produced different results. SWMM comparably overpredicted runoff and peak flow. In using SWMM, use of accurate data with a high confidential level, detail examination over the target basin surface, and the careful selection of a runoff model, which describes Korea's unique hydraulic characteristics are recommended. Modification of existing models through the optimization of variables cannot be achieved at this moment. Setting up an integrated modeling environment is considered to be essential to utilize modeling and further apply the results for various projects. Standardization of GIS database, the criteria for and the scope of model application, and database management systems need to be prepared to expand modeling application.

• Journal of Environmental Health Sciences
• /
• v.31 no.6
• /
• pp.467-474
• /
• 2005

The runoff characteristics of combined sewer overflow(CSO) in the urban area of Jeonju were investigated and analyzed by using the SWMM (Storm Water Management Model) and GIS. From August to November 2004, investigations on two rainfall events were performed and flowrate, pH, BOD, COD, SS, T-N and T-P were measured. these data were used for model calibration. Using GIS technique, watershed characteristics of study area were calculated. that is, divide into sub_basin, total width, slope, make soil map etc. On the basis of the measured data and the simulation results by SWMM, it could be known that the $80-90\%$ of pollution load are discharged in early-stage storm runoff. SMC(site mean Concentration) for combined sewer system area were BOD 28.1, COD 31.5, SS 186 ppm etc. this is shown that during the rain fall, high concentration of waste was loaded to receiving water. Unit loads of combined sewer system area were BOD 306, COD 410, SS 789, T-N 79, T-P 6.8 kg/ha/yr.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.1
• /
• pp.39-51
• /
• 1999

This study has an object to evaluate runoff characteristics with ILLUDAS model and SWMM owing to each rainfall distribution type of Huff's quartile and each rainfall duration time of 30 ,60, 120 and 180 minutes. As a result of this study, Type-Ⅰ Extreme (TIE) rainfall distribution pattern with Huff's 2nd quartile is adequate for Cheju volcanic island . To decide optimal rain fall duration , time of concentration and critical duration should be compared and analyzed each other. In this study, 30 and 120 miniutes were suggeste to iptiaml duration time of A and B study basins. It is concluded that the magnitude of peak runoff discharge is maximum with Huff's 4th quartile, and that of total runoff volume is maximum with Huff's 4th quartile for ILLUDAS model and with Huff's 1st quartile for SWMM. As rainfall duration time increasing is increasing . Also in case of total runoff volume, volumen by SWMM is less than by ILLUDAS model as to variation ratio of total runoff volume in A and B study basin. Therefore, the resulots of this study canb e sued as basic data in determining adequate rainfoal duration time and rainfall distribution type and used for urban drainage systems analysis and design at small urbanization catchment is Cheju volcanic island.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.126-126
• /
• 2021

Stormwater reduction plays an important role in the safety and resilience to flooding in urban areas. Due to rapid climate change, the world is experiencing abnormal climate phenomena, and sudden floods and concentrated torrential rains are frequently occurring in urban basins and the amount of outflow due to stormwater increases. In addition, the damage caused by urban flooding and inundation due to extreme rainfall exceeding the events that occurred in the past increases. To solve this problem, water supply, drainage, and water supply for sustainable urban development, the water management paradigm is shifting from sewage maintenance to water circulation and water-sensitive cities. So, in this study, The purpose of this study is to examine measures to increase the resilience of urban ecosystem systems for urban excellence reduction by analyzing the effects of green infra structures and LID techniques and evaluating changes in resilience. In this study, for simulating and analysis of runoff for various stormwater patterns and LID applications, Storm Water Management Model (SWMM) was used.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2022.05a
• /
• pp.201-201
• /
• 2022

본 연구에서는 강우량이 여름에 집중되어있는 우리나라의 강우 특성을 잘 나타낼 수 있는 최적의 확률분포형을 선정하고 해석적 확률모델 (Analytical Probabilistic Model, APM)을 개발하여 유출량을 예측하고자 하였다. 국내 10개 지역인 부산, 춘천, 대구, 대전, 전주, 진주, 서울, 속초, 태백, 원주를 연구 지역으로 설정하였고, 30년 시 단위 강우자료를 지역별 interevent time definition(IETD)을 적용하여 강우 사상으로 그룹화하였다. APM 연구에 일반적으로 사용되는 일변수 지수 분포 이외의 이변수 지수, 감마, 이변수 로그정규 확률밀도함수 (Probability Density Function, PDF)를 강우사상의 특성인 강우량, 강우 지속시간, 무강우 시간의 히스토그램에 적용한 결과, 이 변수 로그정규분포가 우리나라의 강우 특성을 가장 잘 대표하였다. 로그정규분포를 이용하여 APM을 유도하고 유출량을 예측하였다. 예측한 유출량에 대한 빈도분석을 수행하여 Storm Water Management Model (SWMM)의 결과와 비교함으로써 유도한 APM의 적합성을 확인하였다. SWMM의 입력 매개변수 보정을 위해서는 서울 군자 지역에서 관측한 실제 강우량 및 유출량 자료를 사용하였다. 로그정규분포로 유도한 APM과 SWMM의 빈도분석 결과를 비교하였을 때 초과 확률과 재현주기 모두 매우 유사한 결과를 나타내었음을 확인하였다.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4B
• /
• pp.379-387
• /
• 2006

An urban inundation model coupling an one-dimensional stormwater model, SWMM(Storm Water Management Model), and a two-dimensional inundation model was developed to simulate inundation caused by the surcharge of storm sewers in urban areas. The limitation of this model which can not simulate the interaction between drainage systems and surcharged flow was resolved by developing Dual-Drainage inundation analysis model which was based upon hydraulic flow routing procedures for surface flow and pipe flow. The Dual-Drainage inundation analysis model can simulate the effect of complex storm drainage system. The developed model was applied to Dorim, catchment. The computed inundated depth and area have good agreement with the observed data during the flood events. The developed model can help the decision support system of flood control authority for redesigning and constructing flood prevention structures and making the potential inundation zone, and establishing flood-mitigation measures.

• Journal of Korean Society on Water Environment
• /
• v.26 no.1
• /
• pp.61-70
• /
• 2010

The increase of impervious cover (IC) in a watershed is known as an important factor causing alteration of water cycle, deterioration of water quality and biological communities of urban streams. The study objective was to assess the impact of IC changes on the surface runoff characteristics of Kap Stream basin located in Geum river basin (Korea) using the Storm Water Management Model (SWMM). SWMM was calibrated and verified using the flow data observed at outlet of the watershed with 8 days interval in 2007 and 2008. According to the analysis of Landsat satellite imagery data every 5 years from 1975 to 2000, the IC of the watershed has linearly increased from 4.9% to 10.5% during last 25 years. The validated model was applied to simulate the runoff flow rates from the watershed with different IC rates every five years using the climate forcing data of 2007 and 2008. The simulation results indicated that the increase of IC area in the watershed has resulted in the increase of peak runoff and reduction of travel time during flood events. The flood flow ($Q_{95}$) and normal flow ($Q_{180}$) rates of Kap Stream increased with the IC rate. However, the low flow ($Q_{275}$) and drought flow ($Q_{355}$) rates showed no significant difference. Thus the subsurface flow simulation algorithm of the model needs to be revisited for better assessment of the impact of impervious cover on the long-term runoff process.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.397-397
• /
• 2015

The frequency of urban floods is recently increased as a consequence of climate change and haphazard development in urban area. To mitigate and prevent the flood damage, we generally utilized a numerical model to investigate the causes and risk of urban flood. Contrary to general flood inundation model simulating only the surface flow, the model needs to consider flow of the sewer network system like SWMM and ILLUDAS. However, this kind of model can not consider the interaction between the surface flow and drainage network. Therefore, we tried to evaluate the impact of bidirectional interaction between sewer and surface flow in urban flooding analysis based on simulations using the quasi-interacted model and the interacted model. As a general quasi-interacted model, SWMM5 and FLUMEN are utilized to analyze the flow of drainage network and simulate the inundation area, respectively. Then, FLO-2D is introduced to consider the interaction between the surface flow and sewer system. The two method applied to the biggest flood event occurred in July 2011 in Sadang area, South Korea. Based on the comparison with observation data, we confirmed that the model considering the interaction the sewer network and surface flow, showed a good agreement than the quasi-interacted model.

• Journal of Environmental Impact Assessment
• /
• v.13 no.4
• /
• pp.153-164
• /
• 2004

An integration study of time-variable small watershed and stream models (USEPA's SWMM and WASP5) was performed for impact assessment of urbanization on water environment. The study area, the Kyoungan Stream, the tributary of Paldang Lake, was divided into 111 subbasins, based on the topographic condition, land use, and drainage system. RUNOFF block of SWMM was applied to estimate runoff flow and quality. EXTRAN block computed daily and hourly flow according to simulated runoff flow, water supply, and drainage data. SWMM was connected to WASP5 by transforming output file of SWMM into input file of WASP5. The nonpoint source loads and flow data of SWMM were imported to WASP5. The stream was divided into 45 segments based on the watershed delineation. The study included three water quality parameters, BOD, TN, and TP. The validate models were used to examine the impact of urbanization on stream flow and water quality.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.302-302
• /
• 2020

최근 우리나라의 기후변화와 도시화로 인한 홍수피해 규모가 대형화 추세를 보이며, 그에 따른 도시침수의 발생이 증가하고 있다. 도시침수로 인한 피해는 파손보다는 침수가 대부분이고, 도시의 규모가 클수록 침수의 비중이 크게 나타난다. 그로 인한 피해는 인명피해 및 재산피해 이외에 여러 가지 피해를 유발하며 도시기능 마비가 일어난다. 이러한 도시지역의 침수피해는 넓은 불투수층으로 인해 홍수 도달시간이 감소하고, 급격한 도시화로 인한 건물, 이외에 하수 관망에 미치는 영향 등 여러 가지를 고려하여 침수해석이 필요하다. 따라서 본 연구에서는 XP-SWMM 모형으로 도시지역의 불투수층의 면적비율, 건물의 영향 등을 고려하여 침수해석을 하고자 하였다. 또한 XP-SWMM 모형의 2차원 TUFLOW엔진을 기반으로 하는 2D 지표 유출 계산을 이용하여 대상 지역의 침수 취약지역을 예측할 수 있을 것이다. 최근 송도국제도시 개발이 이루어진 인천광역시 연수구를 대상지역으로 선정하여 도시지역의 특성을 고려하여 분석을 수행하였다. XP-SWMM 모형의 적용성을 평가하기 위해 대상지역의 도시침수 피해를 입은 강우사상을 선정하여 분석을 수행하였고, 유출량 및 침수면적을 산정하여 침수흔적도와 비교 및 적용성을 평가하였다. 본 연구는 도시지역 하수도 관거의 성능 및 도시지역의 특성을 고려하여 여러 강우 빈도를 이용해 집중호우로 인한 침수지역 및 침수면적 등 침수피해를 예측하여 수해 예방 발전에 기여할 수 있을것으로 사료된다.