• Environmental Engineering Research
• /
• v.24 no.2
• /
• pp.211-219
• /
• 2019

Since improper management practices of solid medical waste (SMW) could potentially result in serious health risks and environmental problems, it is very important to properly treat and dispose of the medical wastes. In this study, current practices of SMW management from storage to final disposal stage in 12 health care facilities (HCFs) of Burundi were investigated using the official government reports. The results showed that 75% and 92% of HCFs used uncovered wheelbarrows and trucks for on-site or off-site SMW transportation, respectively, indicating that most transportation equipment and waste workers are not safely protected. The results also showed that 92.8% of SMW (15,736.4 ton) from all 12 HCFs were inappropriately disposed of through uncontrolled land disposal and incineration. If pharmaceutical wastes and discarded medical plastics (29.5% of SMW) can be separated and treated properly, the treatment costs can be reduced and resource savings can be achieved. Raising awareness of healthcare workers and general public about potential health effects arising from improper SMW management, sufficient financial and human resources for the treatment facilities (especially incinerators), and effective regulations and guidelines for transportation and treatment of SWM are some of the major tasks for safe and sustainable medical waste management in Burundi.

• Journal of Korean Association for Spatial Structures
• /
• v.22 no.1
• /
• pp.41-49
• /
• 2022

In the case of columns in buildings with soft story, the concentration of stress due to the difference in stiffness can damage the columns. The irregularity of buildings including soft story requires retrofit because combined load of compression, bending, shear, and torsion acts on the structure. Concrete jacketing is advantageous in securing the strength and stiffness of existing members. However, the brittleness of concrete make it difficult to secure ductility to resist the large deformation, and the complicated construction process for integrity between the existing member and extended section reduces the constructability. In this study, two types of Steel Grid Reinforcement (SGR), which are Steel Wire Mesh (SWM) for integrity and Steel Fiber Non-Shrinkage Mortar (SFNM) for crack resistance are proposed. One reinforced concrete (RC) column with non-seismic details and two columns retrofitted with each different types of proposed method were manufactured. Seismic performance was analyzed for cyclic loading test in which a combined load of compression, bending, shear, and torsion was applied. As a result of the experiment, specimens retrofitted with proposed concrete jacketing method showed 862% of maximum load, 188% of maximum displacement and 1,324% of stiffness compared to non-retrofitted specimen.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.77-77
• /
• 2023

네팔은 6천여 개가 넘는 강이 존재하며 불안정한 기후로 인해 산사태와 홍수가 빈번하게 발생하고 있고, 노후된 상수도 시설 문제도 있어 효과적인 물관리 대책이 필요하다. 이 연구는 네팔 카트만두 인근의 소도시인 둘리켈시를 대상지역으로 하여 스마트 물관리 도입 방안에 대한 타당성 연구조사를 수행하였다. 이를 통해 스마트물관리(SWM) 사업계획을 수립하고, 상수도 관리 기술이 둘리켈시 수돗물 공급 전과정에서 수량·수질을 체계적으로 관리할 수 있도록 계기를 마련하는 것을 목표로 하였다. 주요 연구로 국내 스마트물관리 기술의 네팔 적용성 분석, 수운영 자료및 현황 조사, 스마트 물관리 도입을 위한 수도 시설의 설계 방향을 수립하였고, 기술 도입과 확대 방안을 제시하였다. 스마트 물관리 기술의 적용 타당성 분석을 위하여 현장 조사를 수행하였고, 수리 계측데이터의 분석, 수원지, 정수장, 주요 관로에서의 수질을 분석하였다. 이외에 관망수리해석을 기반으로 대상지역 내 공급가능한 수량을 산정하였고, 상수도 공급이 어려운 지역에 대한 추가시설 확보방안을 제시하였다. 현재 조건에서의 상수도 운영, 관리체계를 분석하여 노후화된 상수도 시설의 개선 및 보완 방안, 스마트 물관리 기술 도입 가능성도 제시하고자 하였다. 연구 결과를 기반으로 기본계획과 실시설계를 통하여 스마트 물관리 인프라가 둘리켈시에 도입될 경우, 물 공급의 불균형으로 인한 피해를 최소화하고, 수돗물의 안정적인 공급 및 수질 안정성 확보, 상수관망에서 수질 및 누수 사고에 대처가 가능할 것으로 보이며 인근 카트만두를 비롯한 지방 소도시에도 스마트 물관리 기술적용에 기틀이 될 것으로 기대된다.

• The Korea Journal of Herbology
• /
• v.38 no.4
• /
• pp.31-43
• /
• 2023

Objectives : The objective of this study was to investigate the phytochemistry and pharmacological activities of Cirsium setidens. Methods : Domestic and international articles about Cirsium setidens were investigated. A review was perfoemed via DB searching engine such as Sci.Direct, Springer, DBpia, KISS, Google scholar, Kipris, and so on. Total 73 listed literature were classified by compound analysis and pharmacological efficacy. Results : C. setidens contains pectolinarin and its glycoside, pectolinarigenin as index compounds, and linarin, apigenin, diosmetin, scopoletin, acacetin, cirsimarin, cirsimaritin, setidenosides A and B, silymarin, hispidulin, 92 volatile compounds, and 15 fatty acids. The Pharmacological activities of C. setidens has been reported to inhibit of platelet aggregation and fat accumulation in the liver, inhibit to hepatitis, anti-cancer, antibacterial, skin improvement, hair growth, liver protection, anti-diabetic, anti-inflammatory, sedative. Also, It has been reported the effect of cholesterol-lowering and anti-obesity, neuroprotective effects, increasing human stem cell viability, inhibiting osteoclast formation and osteogenic differentiation. Conclusion : This reviews showed that C. setidens which has been traditionally used for the treatment of inflammation and hypertension, has anticancer and river protective effect, as well as hair loss and diet. In order to maximize the efficacy of C. setidens, research has also begun on the effect of processing processes such as fermentation or fine powdering and combining natural plant resources.

• Advances in environmental research
• /
• v.12 no.2
• /
• pp.95-111
• /
• 2023

Pollution, climate change, and waste accumulation are only some of the new problems that have arisen because of the exponential population growth of the past few decades. As the global population expands, managing municipal solid trash becomes increasingly difficult. This is by far the most difficult obstacle for governments to overcome, especially in less developed nations. The improper open dumping of trash, which is causing mayhem across the country, has two immediate effects: it contaminates groundwater and surface water. Air pollution and the accumulation of greenhouse gases are both exacerbated by the release of methane and other harmful waste gases. Leachate from the landfill leaks underground and pollutes groundwater. In most cases, leachate moves into the groundwater zone and pollutes it after forming in association with precipitation that infiltrates via waste. This has far-reaching effects on people's health and disturbs the natural environment. This review article critically examines the current state of Solid Waste Management (SWM), addressing both the highlighted concerns and the government management solutions that have been put in place to address these issues. In addition, the constraints, and difficulties that India will face in the future in terms of solid waste management and the role of models for such a system are discussed.

• Computers and Concrete
• /
• v.26 no.4
• /
• pp.309-316
• /
• 2020

The application of multi-variable adaptive regression spline (MARS) in predicting he long-term compressive strength of a concrete with various admixtures has been investigated in this study. The compressive strength of concrete specimens, which were made based on 24 different mix designs using various mineral and chemical admixtures in different curing ages have been obtained. First, The values of fly ash (FA), micro-silica (MS), water-reducing admixture (WRA), coarse and fine aggregates, cement, water, age of samples and compressive strength were defined as inputs to the model, and MARS analysis was used to model the compressive strength of concrete and to evaluate the most important parameters affecting the estimation of compressive strength of the concrete. Next, the proposed equation by the MARS method using particle swarm optimization (PSO) algorithm has been optimized to have more efficient equation from the economical point of view. The proposed model in this study predicted the compressive strength of the concrete with various admixtures with a correlation coefficient of R=0.958 rather than the measured compressive strengths within the laboratory. The final model reduced the production cost and provided compressive strength by reducing the WRA and increasing the FA and curing days, simultaneously. It was also found that due to the use of the liquid membrane-forming compounds (LMFC) for its lower cost than water spraying method (SWM) and also for the longer operating time of the LMFC having positive mechanical effects on the final concrete, the final product had lower cost and better mechanical properties.

• Journal of Institute of Control, Robotics and Systems
• /
• v.14 no.7
• /
• pp.711-719
• /
• 2008

Although non-real time simulation and pilot based evaluations are available for the development of flight control computer prior to real flight tests, there are still many risky factors. The control law designed for prototype aircraft often leads to degraded performance from the initial design objectives, therefore, the proper evaluation methods should be applied such that flight control law designed can be verified in real flight environment. The one proposed in this paper is IFS(In-Flight Simulator). Currently, this system has been implemented into the F-18 HARV(High Angle of Attack Research Vehicle), SU-27 and F-16 VISTA(Variable stability. In flight Simulation Test Aircraft) programs. This paper addresses the concept of switching mechanism for FLCC(Flight Control Computer)-SWMC(Switching Mechanism Computer) using 1553B communication based on flight control law of advanced supersonic trainer. And, the fader logic of TFS(Transient Free Switch) and stand-by mode of reset '0' type are designed to reduce abrupt transient and minimize the integrator effect in pitch axis control law. It hans been turned out from the pilot evaluation in real time that the aircraft is controllable during the inter-conversion process through the flight control computer, and level 1 handling qualities are guaranteed. In addition, flight safety is maintained with an acceptable transient response during aggressive maneuver performed in severe flight conditions.

• Mycobiology
• /
• v.29 no.3
• /
• pp.160-163
• /
• 2001

Sikhae is a Korean traditional beverage of saccharified rice. Its factory waste(SFW) is usually thrown away instead of being used. We developed a cheap substrate of SFW for use in liquid spawn that is known for its higher fruit body yields than grain spawn in sawdust cultivation. Mycelia of Lentinula edodes ASI 3046, which is regarded as the most suitable strain for sawdust cultivation, were cultured on six kinds of previous known media and SFW. As the seven kinds of media were applied, a Sikhae Factory Waste(SFW) was most excellent in growth. The dried mycelial weight in SFW was almost four times as much as that in the other media. In the flask culture, optimum culture conditions for the mycelial growth were obtained after 13 days of cultivation at media volume of 100 ml, 100 rpm, initial pH 4.5, and $25^{\circ}C$. The best mycelial growth was observed when $MgSO_4{\cdot}7H_2O$ and D-sucrose were added as a supplement in SFW. SWM must be a remarkable medium for L. edodes because of its simple preparation and low cost.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2012.05a
• /
• pp.745-749
• /
• 2012

국내 주요하천은 지속적인 산업화와 난개발로 인해 생태계파괴 및 수변생물의 서식처 환경 악화로 하천 생태계에 많은 악영향을 받고 있다. 그러나 1990년대 이후 국내에서는 하천의 기능과 생물의 다양성, 하천환경 및 생태학적인 가치와 중요성에 대한 인식이 매우 커짐에 따라 하천의 생태적 기능을 매우 중요시 하고 있으며, 하천의 난개발로 인한 피해를 복원하기 위해 활발한 연구가 진행되고 있다. 대표적인 연구로 생태계 건전화 개념을 도입하여 담수성 어류 서식처 제공 및 이동에 필요한 유량을 산정한 한국 수자원공사(1995)의 연구가 있으며, 김규호 등(1996a, 1996b)은 물고기 서식처 환경 중 특히 수심과 유속 등 수리조건을 유지하기 위한 최소유량 산정 방법을 제시하였다. 또한 노경범(2011)은 섬진강의 하천환경 회복을 위한 연구대상 구간에서의 대표어종을 선정하여 서식처 특성 파악을 위해 하천 특성을 연구하였다. 이와 같이 현재 국내에서도 하천의 기능과 생태학적 기능을 위한 노력과 연구가 진행되고 있다. 그러나 생태학적 서식처 연구에서는 아직까진 미진한 부분이 많이 있다. 그 예로 보호종이나 멸종위기어종과 같은 생물의 서식처 확보를 위한 연구가 아직까지는 많은 노력과 연구가 필요한 상태이다. 본 연구에서는 환경부에서 지정한 멸종위기 1급 어종인 퉁사리를 대상으로 서식환경 특성 연구를 진행하였으며, 퉁사리의 생태학적 서식특성과 현재 지석천 상류 유역에서 관찰되고 있는 서식구간을 중심으로 MD-SWMS (Multi-Dimensional, Surface Water Modeling System) 모형을 이용하여 수리특성 분석을 수행하였다. 이를 위해 하상재료 입도분석을 실시하였으며, 그 결과 입도가 큰 굵은모래 및 잔자갈, 굵은자갈로 구성되어 있음을 알 수 있었다. 또한, 수리학적 특성분석결과 서식구간 내에서는 비교적 빠른 유속이 나타났다. 이러한 퉁사리의 서식환경의 특성 분석으로 서식구간 내 입도가 큰 하상재료로 구성되어 있으며, 퇴적구간이 생성되지 않을 정도의 유사이송량과 유속이 필요할 것으로 분석되었다. 향후 퉁사리의 장기적인 서식환경 조성과 보존을 위해 대상구간의 유사이송의 연구와 실측 및 수변환경 모니터링을 통한 다양한 연구가 진행되어야 할 것으로 판단된다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.6
• /
• pp.834-840
• /
• 2021

The management and installation methods of pressure gauges in water supply pipeline are not efficiently regulated and their installations are different in each site. In this paper, various domestic and overseas documents are examined about the pressure gauge. In order to improve the efficiency of operation management such as pipeline network and pump operation, water pressure needs to be measured as accurate as possible, by which decision making for optimal pipe network can be achieved. To get the goal, the installation of pressure gauge should be reviewed about where and how to install. In this study, an optimal horizontal distance test is conducted, in which pressure value variation is monitored and analyzed according to up and down stream distances and valve flow control, and a optimal vertical position test is also analyzed by installing the pressure gauges vertically from the up(180°) to the bottom (0°) of the pipeline.