• 대한기계학회논문집A
• /
• 제38권9호
• /
• pp.1043-1048
• /
• 2014

체결부품의 사이즈가 작아질수록 실제 접합부의 면적이 줄어들기 때문에 체결력은 감소한다. 이러한 체결부품의 체결력을 결정하는 요소는 소재(Material), 구조(Geometry), 마찰(Friction)이 있다. 본 연구에서는 체결부품의 사이즈가 줄어들면서 체결력을 향상시킬 수 있는 방법 중의 하나인 소재 변경에 대하여 연구하였다. SWCH18A 와 SUS XM7 을 적용하여 초소형 나사를 제작하였으며, 3 차원 치수 측정을 통하여 피치정밀도와 두께정밀도를 측정하였다. 비커스 경도 측정을 통하여 나사가 외부의 힘에 의해 변형에 대한 저항력을 분석하였다. 또한 파단토크 시험과 SEM 을 이용한 파단면 분석을 통해 파단특성을 분석한다.

• 대한금속재료학회지
• /
• 제49권1호
• /
• pp.1-8
• /
• 2011

To measure the sensitivity of the hydrogen embrittlement from plated high strength bolts (SWCH18A, F11T), the bolt was stressed by a corresponding to the amount of tensile strain of 5% and 20%, and then the bolt developed a crack on the surface. The bolt that didn't have concentrated hydrogen, even though it was stressed by a corresponding the amount of tensile strain of 5% and 20%, no crack developed. However, the bolt that had concentrated hydrogen, developed cracks from the thread crest to the root. It is impossible to measure the hydrogen amount from plated high strength bolts using Hydrogen-Determinator, because of the limitation of the minimum sample size (about 1g as a mass or $5{\times}5{\times}5 mm^3$ as a volume). Therefore, the sensitivity of hydrogen embrittlement can be measured by observing the presence of cracks on the surface of plated high strength bolts which are stressed by a corresponding to the amount of tensile strain of 5% and 20%.

• 한국정밀공학회지
• /
• 제32권6호
• /
• pp.503-507
• /
• 2015

In this study, we compare the performance of the screw through the Clamping force of the test materials to change shape and structure, one of the ways to maintain and improve the engaging force to cope with the miniaturization of the fastener threads are further thinner and lighter precision way that can improve the fastening force of the screw results were as follows. The clamping force according to the materials was $7.57N{\cdot}cm$ in SUS XM7 and SWCH18A was $5.97N{\cdot}cm$. This result was to be found to average 13.5% high in the Clamping force of SUS XM7 materials. In the case of the clamping force of the screw thread shape change, the clamping force of symmetrical and asymmetrical thread was $6.78N{\cdot}cm$ and $7.57N{\cdot}cm$. The clamping force of the asymmetrical thread showed an average high of 11.6%.