• Journal of Korea Water Resources Association
• /
• v.35 no.1
• /
• pp.13-24
• /
• 2002

In a physically realistic but simplified manner, an attempt is made in this study to develop a predictive model for swash hydrodynamics across the shore due to the storm waves on an arbitrary beach profile. Date from the SUPERTANK laboratory Data Collection Project are used for the model development, in which experiments were designed to simulate dune erosion under storm conditions at a prototype scale. The model predicts variations of swash height, velocity and period across the beach face in a swash zone. In general, the model proves to be capable of predicting variations of swash height, velocity and period across the shore. Quantitatively better predictions for the swash parameters could be achieved by improving the prediction of the beach face elevation, ymax, where the significant swash height becomes zero.

• 유체기계공업학회:학술대회논문집
• /
• 2002.12a
• /
• pp.215-220
• /
• 2002

This paper describes a simulation model for estimation the performance of the swash plate type compressor for automotive air conditioning system. The model includes consideration of both the compression process and the dynamic behavior. Also, this study compares the results obtained from the performance simulation with experimental results. Further, the effects of the inclined angle of swash plate on the performance of swash plate type compressor are discussed.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.1335-1340
• /
• 2004

Due to the distinct advantages of comfort, drive ability and fuel economy standard, the variable displacement swash plate type compressor which can control the compressor displacement by increasing or reducing the swash plate angle has been developed for automotive air-conditioning system. That can be obtained constant temperature of car room on the variation cooling capacities or engine speeds. This paper was carried out the analysis of swash plate behavior to obtain the forces and moments applied to the swash plate and to get the variable controlability on the variation of compressor speeds and swash plate chamber pressures. The results of simuation agree very well with the experimental data.

• Tribology and Lubricants
• /
• v.14 no.3
• /
• pp.65-73
• /
• 1998

A dynamic analysis and friction loss of non-variable swash plate compressor are studied theoretically. Rotating swash plate and reciprocating pistons are modelled kinematically, and forces and torques acting on rotor-bearing system are analyzed. Then, friction losses on 4 roller bearings, 10 sliding parts between swash plate and shoes, and 10 lubricating surfaces between cylinders and pistons are calculated. On each frictional element of sliding surfaces and roller bearings, the same friction loss is obtained, respectively.

• Transactions of Materials Processing
• /
• v.19 no.2
• /
• pp.127-131
• /
• 2010

Carbon-epoxy prepreg has been introduced in the forming of the upper and lower swash plates that control the pitch of rotor blade of unmanned helicopter because of its lightweight. Taguchi experimental method has been used by introducing the variables such as arrangement angle, laminated number and forming temperature, in order to obtain the proper forming method by using prepreg satisfying the required strength of the swash plate. In the evaluation of structural safety for the swash plates, three kinds of models are considered by using FE-analysis. In comparison of the hot forged products with Al6061-T6 and the formed products with prepreg, it was found that ultimate tensile strength of the products with prepreg is three times higher than that of the Al6061-T6, and the weight reduction of 68.5g can be achieved by using prepreg swash plates.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.12 no.5
• /
• pp.109-115
• /
• 2013

In this study, a variable swash plate compressor has been used in a vehicle to improve its fuel efficiency. To manufacture the swash plate, either SCM 435 or UNS C67300 was used. The effects of using different materials for the structural reliability of compressor have been investigated. Static analysis was carried out on swash plate A/C compressor by using commercial software ANSYS 13.0v. The results showed that the Max. stress occurred on the swash plate made of UNS C67300 was lower than that made of SCM435, which indicated that UNS C67300 is more suitable for producing the safe swash plate.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2019.05a
• /
• pp.90-90
• /
• 2019

본 연구에서는 SWASH(Simulating WAves till SHore) 모형의 염분분포 해석의 정확성을 평가하기 위해 Goswami et al.(2007)의 모형실험을 재현하였다. SWASH모형은 Delft 대학에서 개발된 비정수압수치모형으로 연직방향으로 층(layer)을 나누어 자유수면변위를 정확하게 예측하고 표준 ${\kappa}-{\varepsilon}$ 난류모델을 이용해 염분, 온도 및 침전물 등의 난류확산을 계산한다. 우선 Goswami et al.(2007)의 모형실험 중 정상상태의 모형실험을 이용해 층수에 따른 수치모형의 정확도를 평가하였다. SWASH 모형의 층수를 늘리며 수치모의를 수행한 결과, 층수가 늘어날수록 종, 횡 방향의 염분농도 분포가 정확하게 나타나는 것을 확인하였다. 추가로 SWASH 수치모형을 이용해 염수침투 및 후퇴 상태의 모형실험도 수치모의하였다. 염수의 공급에 따라 시간에 따른 염분농도 분포가 변화하는 것을 확인하였다. 또한 연직방향의 층수가 많은 경우 모형실험의 결과와 비교적 잘 일치하는 것을 확인할 수 있다. 따라서 연직방향의 층수를 늘려감에 따라 수심방향으로 더 정밀한 염분분포 해석이 가능하다는 것을 알 수 있다. 그러나 연직방향으로 많은 층을 나눈 경우 계산시간이 증가하기 때문에 수심이 작거나 연직방향의 염분농도 분포가 중요하지 않은 경우라면 적절한 층수(5~10 layer)를 고려해 수치모의를 수행하는 것이 시간과 비용측면에서 더욱 경제적이라고 할 수 있다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.21 no.1
• /
• pp.34-40
• /
• 2022

In this paper, a flow analysis of a swash-plate type hydraulic piston pump installed on a hydraulic flow supply system for marine vessels is presented. A model and governing equations for computational fluid dynamics (CFD) analyses of swash-plate type hydraulic piston pumps were built, and simulation results regarding the internal flow field of the pump were obtained. By analyzing the internal flow of the swash-plate type hydraulic piston pump, we can confirm the time-dependent stroke of each piston as the pump rotates. We also verified that by analyzing the pulsating flow against the slope of the swash plate, the simulation results match well with the experimental results. The natural frequency of the system was computed to be approximately 380 Hz by applying and analyzing the fast Fourier transform (FFT) of each swash plate slope evaluated.

• Journal of Korea Water Resources Association
• /
• v.56 no.10
• /
• pp.603-617
• /
• 2023

This study aims to provide a better understanding of the turbulent flow characteristics in swash zone. A double dam-break method is employed to generate the swash zone flow. Comparing with the conventional single dam-break method, a delay between two gate opening can be controlled to reproduce various interactions between uprush and backwash. For numerical simulations, overInterDyMFoam based on OpenFOAM is adopted. Using overInterDyMFoam, interface between two immiscible fluids having different densities (i.e., air and water phases) can be tracked in a moving mesh with multiple layers. Two-dimensional Reynolds-Averaged Navier-Stokes equations are solved with a standard 𝜅-𝜖 turbulence model for momentum and continuity. Numerical model results are validated with laboratory experiment data for the time series of water depth and streamwise velocity. Turbulent kinetic energy distribution is further investigated to identify the turbulence evolution for each flow regime (i.e., uprush, backwash, and swash-swash interaction).

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.165-168
• /
• 2006

Due to the distinct advantages of comfort, drive ability and fuel economy standard, the variable displacement swash plate type compressor which can control the compressor displacement by increasing of reducing the swash plate angle has developed for automotive air-conditioning system. That can be obtained constant temperature of car room on the variation cooling capacities of engine speeds. In this paper we investigated the improvement of internally controlled variable displacement swash plate compressor on noise.