• 제목/요약/키워드: SW engineering

검색결과 830건 처리시간 0.033초

고해가 종이의 응력-변형 특성 및 물성에 미치는 영향 (Effect of Refining on the Stress-Strain Characteristics and Physical Properties of Paper)

  • 원종명
    • 펄프종이기술
    • /
    • 제38권4호
    • /
    • pp.10-16
    • /
    • 2006
  • The study was carried out to investigate how the refining of pulps affects the stress-strain characteristics and physical properties of paper. SwBKP and HwBKP were refined with Hollender laboratory beater to obtain three levels of freeness(500, 400 and 300 ml CSF) at the different consistencies(0.5% and 1.0%). The effects of fines were also evaluated. The stresses and strains of papers made from SwBKP and HwBKP were increased with refining. The absolute value of strain in paper made from SwBKP was higher than those of paper made from HwBKP. We also found that the presence of fines increased the stress and strain significantly in both pulp types. The refining at lower pulp consistency gave higher stress and strain properties. Most physical properties of paper were improved with refining, but the effect of refining consistency depended on the characteristics of each physical properties.

태양광 최대전력추종 제어알고리즘 성능 비교 분석 (Solar Comparative Analysis of Various MPPT Algorithms)

  • 심재휘;강산;김신아;홍기남;최주엽
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2010년도 하계학술대회 논문집
    • /
    • pp.77-78
    • /
    • 2010
  • As the maximum power operating point(MPOP) of photovoltaic(PV) power systems alters with changing atmospheric conditions, the efficiency of maximum power point tracking(MPPT) is important in PV power systems. Moreover, grid-connected PV system occurs some problems such as voltage inequality and harmonics. Therefore, this paper presents the results of a grid-connected PV system modeling by PSIM simulator and investigates the influence on the grid-connected PV system from aspect of power quality, i.e. voltage drop. This paper includes four MPPT algorithms; Perturbation & Observation(P&O), Improved P&O, Increment Conductance(Incond), Hysterisis simulated with irradiation changing.

  • PDF

M&S 시스템을 활용한 Tac-ELINT 지상운용 SW 개발 방안 연구 (A Research on Tac-ELINT SW Development Method Using M&S System)

  • 신동조;곽현규;이광일
    • 한국군사과학기술학회지
    • /
    • 제14권6호
    • /
    • pp.1058-1066
    • /
    • 2011
  • This research paper on Tac-ELINT SW development method using M&S system describes the validation and verification methods of Tac-ELINT ground operating software development each stages, and the method of improving reusability of software using SBD(Simulation Based Design/Development) concept. In this project, We obtain the EW software SBD technologies and improved Tac-ELINT ground operating software through software crisis mitigation. This method and technology will expect to support a future EW system and any other various weapon software development.

디자인 씽킹 메카니즘과 소프트웨어공학 접목에 관한 연구 (A Study on mapping Software engineering with Design thinking mechanism)

  • 서채연;김장환;박보경;장우성;손현승;김영철
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2020년도 춘계학술발표대회
    • /
    • pp.349-351
    • /
    • 2020
  • 4차 산업혁명시대가 도래함으로써 수많은 영역에 다양한 소프트웨어(SW)가 필요할 것이며, 특히 비전공자 및 기초 전공자들의 창의적 사고 기반 SW에 대한 이해가 요구된다. 하지만 문제는 창의적 사고 기반의 SW에 대한 정의 및 아이디어가 부족하다. 우리는 교육 영역에서의 창의적 사고 방법 및 주요 쟁점들을 비전공자들에게 강의한 경험이 있지만 실질적으로 창의적 사고기법을 통해서 소프트웨어로 구현하는 것에 큰 어려움을 겪고 있다. 따라서 이러한 점을 개선하는 창의적 사고 기법과 소프트웨어 공학기법을 접목인 디자인 씽킹 메카니즘과 소프트웨어공학 접목을 제안한다.

스마트 로봇을 활용한 창의적 RSPM 공학 교육 및 NCS 직무 교육 효과 분석에 관한 연구 (The Study On Creative RSPM(Robot Based Software Programming Method) Engineering Education And NCS Training Effectiveness Analysis Using Smart Robot)

  • 이병선
    • 전자공학회논문지
    • /
    • 제53권8호
    • /
    • pp.136-144
    • /
    • 2016
  • 일반적으로 임베디드 소프트웨어 교육을 위해 다양한 교구와 학습 방법이 개발 및 활용이 되고 있다. 본 논문에서는 임베디드 소프트웨어 공학교육에서 요구되고 있는 창의적 문제해결 방법을 학습하기 위하여 스마트 로봇을 활용하고자 한다. 스마트 로봇을 사용한 창의적 공학교육으로 그 NCS 직무교육 효과를 분석하고 임베디드 소프트웨어교육 향상을 위하여 RSPM(Robot Based Software Programming Method) 공학교육 방법에 대해 제시한다. 임베디드 소프트웨어 공학교육에서 좀 더 창의적이고 소프트웨어 코딩 능력향상을 위해 스마트 로봇인 EV3 시스템을 활용하였다. 본 논문에서는 임베디드 소프트웨어 공학교육에 미치는 정도, 흥미, 프로그램 능력 향상과 영향에 대하여 설문 및 분석을 통하여 창의적인 RSPM 공학교육과정을 통하여 EV3 시스템을 교구로 활용하여 성공적인 임베디드 소프트웨어 코딩 능력 가능성에 대해 제시하고자 한다. 특히 RSPM 공학교육은 스마트 로봇 NCS 직무로써 미래 유망한 임베디드 소프트웨어분야의 직업인으로 성장할 수 있도록 경쟁력을 갖춘 기초 스마트로봇 직무학습 중심으로 구성하였다.

Isolation and Characterization of Nonylphenol-degrading Bacteria

  • Yu, Dae-Ung;Kim, Dong-Myung;Chung, Yong-Hyun;Lee, Yang-Bong;Kim, Young-Mog
    • Fisheries and Aquatic Sciences
    • /
    • 제15권2호
    • /
    • pp.91-97
    • /
    • 2012
  • To isolate a nonylphenol (NP)-degrading bacterium, we isolated a single colony from the NP-degrading microbial consortium SW-3, which was previously isolated from an aqueous environment. Ten colonies that exhibited different cell morphologies were isolated and the strains were named SW-3-A, -B, -C, -D, -E, -F1, -F2, -G, -H, and -I. The ability of isolates to degrade NP was evaluated by kinetic analysis by the constant of NP degradation rate ($k_1$) and the half-life time of NP degradation ($t_{1/2}$). SW-3-F1, -F2, -G, and -I strains were superior at degrading NP. The $k_1$ and $t_{1/2}$ values of the four strains were sixfold higher and one-sixth lower, respectively, than those of the consortium strain. Additionally, SW-3-F1, -G, and -I strains were tested for their ability to degrade NP during coculture. NP degradation by coculture with a combination of all three strains was inferior to that of culture conducted with single isolates, suggesting that the three strains are antagonistic toward each other during NP degradation.

목재섬유와 면섬유의 혼합에 따른 수초지의 파괴인성 변화 (Changes of Handsheet Fracture Toughness by Wood and Cotton Fibers Mixing)

  • 김정중;장동욱;윤상구;신현식;박종문
    • 펄프종이기술
    • /
    • 제46권3호
    • /
    • pp.81-87
    • /
    • 2014
  • Conditions of paper manufacturing process should be changed depending on the end use and paper properties. Most of the case, mixed pulps with long softwood fibers and short hardwood fibers are used to achieve proper qualities of product with reasonable production cost. For specialty paper manufacture the wood pulp and cotton linter pulp are usually mixed together. The objectives of this study is to analyze physical, mechanical and fracture mechanical properties of paper depending on SwBKP, HwBKP and cotton linter pulp(CLP) mixing. When the mixing ratio of SwBKP was increased, strength properties, such as tensile, tear, and folding endurance, were also increased. When the mixing ratio of SwBKP and HwBKP was increased, stress concentration index was decreased and fracture toughness was increased.

Untact 상황에서 PBL 교수법을 통한 SW 프로젝트 영어 지도 사례 연구 (A Case Study of SW Project English Teaching through PBL method in an Untact Environment)

  • 이성옥;김민규;이혜수;정회경
    • 한국정보통신학회:학술대회논문집
    • /
    • 한국정보통신학회 2021년도 추계학술대회
    • /
    • pp.514-517
    • /
    • 2021
  • 본 연구의 목적은 코로나-19로 인한 비대면 상황 가운데 'SW프로젝트 영어'를 PBL 교수법으로 운영한 사례 연구를 통하여 시사점을 도출하는 데에 있다. 교양 영어인 만큼 다양한 학년과 전공 학생들이 수강하였고 개강 직후 학생들의 영어 실력 및 SW 관련성을 판단하고자 설문을 시행하였다. 설문 내용을 바탕으로 학생들의 수강 동기와 코로나-19 상황 가운데 어학 수업을 비대면으로 실시해야 함에 따라 적절한 교육과정 운영, 과제 운영을 구성할 수 있는 학생들의 의견을 수렴하였다. 학생들의 SW 영어 교육에 대한 니즈를 파악 후, SW 관련 영어 실력 배양을 위한 퀴즈와 과제를 구성하였다. 매 과제에 대한 실시간 피드백으로 비대면 녹화콘텐츠 수업임에도 불구하고 1:1 피드백을 통하여 소통하며 학생들의 수업 진행을 점검하였다. 주간 퀴즈를 통한 수업 진도에 따른 학습을 유도하였고 주제와 관련된 과제를 통하여 SW 관련 영어를 학습하도록 하였다. 자신이 모르는 단어를 중심으로 SW 영어 단어장 만들기 및 본인의 목소리로 직접 예제를 녹음하는 과제를 마감까지 충분한 시간을 주어 수행토록 하였다. 과정이 종료되면서 학생들의 성적을 평가한 결과 AI/SW창의융합대학, 경영대학, 문화예술대학, 인문사회대학, 자연과학대학 순으로 학생들의 성적이 평가되었다. 본 연구의 목적은 코로나-19로 인한 비대면 상황 가운데 SW 영어를 PBL(Project-Based Learning : 프로젝트 법)이라는 교수법을 통하여 수업을 운영함으로써 학생들의 SW 영어 성취도를 연구하였다는 점에서 의의가 있다.

  • PDF

Intelligent한 메모리 시스템에서의 Fine-Grained SW Offloading을 위한 성능 분석 (Performance Analysis for Fine-Grained SW Offloading in Intelligent Memory System)

  • 허인구;김용주;이진용;이지훈;이종원;백윤흥
    • 한국정보처리학회:학술대회논문집
    • /
    • 한국정보처리학회 2012년도 춘계학술발표대회
    • /
    • pp.29-32
    • /
    • 2012
  • 전통적으로 컴퓨터의 성능은 중앙 연산 장치 (CPU)의 성능에 따라 좌지우지 되어 왔다. 하지만 CPU의 성능이 지속적인 발전을 거듭하여 무어의 법칙을 비교적 충실히 따라가고 있는 반면, 메모리의 성능은 근래 들어 더디게 발전되는 형국이다. 때문에, CPU와 메모리 간의 성능격차로 인해 메모리의 낮은 성능이 전체 시스템의 성능을 저하시키는 "Memory Wall Problem"은 점점 큰 문제로 대두되고 있다. 이러한 문제를 해결하기 위해 많은 연구에서 메모리 자체의 성능을 발전시키는 것은 물론 메모리 내부에 연산 처리 능력을 추가하여 시스템 전체의 성능을 향상 시키는 시도들을 해왔다. 이 논문에서는 이러한 Intelligent한 메모리 시스템에서의 SW Off-loading을 위한 성능 분석을 다룬다. 이전의 연구들이 주로 큰 단위의 Off-load를 다뤘던 것에 비해 이 논문에서는 작은 단위의 Off-load, 더 정확히는 어셈블리 수준의 Off-load의 효과에 대해 분석한다. 또한 현재의 어셈블리 수준의 Off-load의 한계를 지적하고 이를 극복하기 위한 루프 레벨 Off-load, 새로운 Technology와 아키텍쳐에 대해서도 소개한다.

An Orbital Stability Study of the Proposed Companions of SW Lyncis

  • Hinse, T.C.;Horner, Jonathan;Wittenmyer, Robert A.
    • Journal of Astronomy and Space Sciences
    • /
    • 제31권3호
    • /
    • pp.187-197
    • /
    • 2014
  • We have investigated the dynamical stability of the proposed companions orbiting the Algol type short-period eclipsing binary SW Lyncis (Kim et al. 2010). The two candidate companions are of stellar to substellar nature, and were inferred from timing measurements of the system's primary and secondary eclipses. We applied well-tested numerical techniques to accurately integrate the orbits of the two companions and to test for chaotic dynamical behavior. We carried out the stability analysis within a systematic parameter survey varying both the geometries and orientation of the orbits of the companions, as well as their masses. In all our numerical integrations we found that the proposed SW Lyn multi-body system is highly unstable on time-scales on the order of 1000 years. Our results cast doubt on the interpretation that the timing variations are caused by two companions. This work demonstrates that a straightforward dynamical analysis can help to test whether a best-fit companion-based model is a physically viable explanation for measured eclipse timing variations. We conclude that dynamical considerations reveal that the proposed SW Lyncis multi-body system most likely does not exist or the companions have significantly different orbital properties from those conjectured in Kim et al. (2010).