• Journal of The Korean Astronomical Society
• /
• v.51 no.2
• /
• pp.27-36
• /
• 2018

In a solar coronagraph, the most important component is an occulter to block the direct light from the disk of the sun. Because the intensity of the solar outer corona is $10^{-6}$ to $10^{-10}$ times of that of the solar disk ($I_{\odot}$), it is necessary to minimize scattering at the optical elements and diffraction at the occulter. Using a Fourier optic simulation and a stray light test, we investigated the performance of a compact coronagraph that uses an external truncated-cone occulter without an internal occulter and Lyot stop. In the simulation, the diffracted light was minimized to the order of $7.6{\times}10^{-10}I_{\odot}$ when the cone angle ${\theta}_c$ was about $0.39^{\circ}$. The performance of the cone occulter was then tested by experiment. The level of the diffracted light reached the order of $6{\times}10^{-9}I_{\odot}$ at ${\theta}_c=0.40^{\circ}$. This is sufficient to observe the outer corona without additional optical elements such as a Lyot stop or inner occulter. We also found the manufacturing tolerance of the cone angle to be $0.05^{\circ}$, the lateral alignment tolerance was $45{\mu}m$, and the angular alignment tolerance was $0.043^{\circ}$. Our results suggest that the physical size of coronagraphs can be shortened significantly by using a cone occulter.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.380-386
• /
• 2010

This study was carried out to develop soybean thresher which is able to reduce the soybean threshing damage in comparison to the conventional thresher. A threshing cylinder with different diameter of 480 and 384 mm at each end and with one quarter disc pegs of 60 mm radius was developed and attached to the prototype thresher. A conventional thresher which has a threshing cylinder with $\wedge$ type threshing pegs and same diameter of 480 mm at each end was used for comparative test. A series of comparative performance test was conducted using sun-yu and chung-ja soybean. For sun-yu bean, which is white and usually used for soybean paste and soy sauce, the ratio of damaged beans of prototype ranged 2-3% for 330-360 rpm which is recommended cylinder speed by manufacturer. The ratio of damaged beans of conventional thresher was 3-4% for the same range of cylinder speed. chung-ja beans with black color usually shows high damaged ratio compared with white beans, thus cylinder speed of 250-300 rpm is recommended by manufacturer to reduce the damaged ratio. For this range of cylinder speed, the damaged ratio of prototype was 1.3-1.4% and it was 2.7-6.1% for the conventional thresher. Thus prototype is able to reduce the damaged ratio 1.5-5.0% compared with conventional thresher. Prototype shows 0.4% of unthreshed soybean ratio for sun-yu bean in the optimum range of cylinder speed and it was 0.87% for the conventional thresher. For chung-ja bean, the ratio of unthreshed soybean was almost same for both prototype and conventional thresher with the value of 4.0%. The reason of high unthreshed soybean ratio for chung-ja bean compared sun-yu bean is due to the high seed moisture content of 29.11% which is much higher than that of the recommended.

• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.85-93
• /
• 2011

The purpose of this study was to establish the reliability and validity of the passive lumbar extension (PLE) test and prone instability test (PIT). Thirty-three subjects (14 males, 19 females) with lower back pain enrolled in the study and the subjects were divided into 2 groups (positive and negative instability groups) on the basis of radiographies of flexion and extension. Reliability was determined by the kappa coefficient and validity was examined using calculated sensitivity, specificity, and the likelihood ratio. The results showed that the reliability of the PLE test was higher than the PIT (intra-rater reliability: k=.86 and k=.81, interrater reliability: k=.65 and k=.62) and the validity of the PLE test was also higher than the PIT (sensitivity: 91% and 62%, specificity: 95% and 85% positive likelihood ratio: 20.00 and 4.10, negative likelihood ratio: .10 and .45). In conclusion, we think that the PLE test was a more reliable and valid method for lumbar instability than the PIT.

• Proceedings of the KSPS conference
• /
• 1996.10a
• /
• pp.421-425
• /
• 1996

A multimedia Version of ${\ulcorner}Lee-Kim test of Korean Articulation{\lrcorner}$ "Lee-Kim Test of Korean Articulation" consisting of picture test, Sentence test, user's manual and notation, analysis sheets was published in 1990 to serve as a standard tool for testing and analysing the articulation errors of normal and abnormal speakers. It has been found, however that, the picture and sentences test using the printed version of Lee-Kim test of Korean Articulation revealed several limitations, in i, e, a) inefficiency in inducing desirable response from the informants b) lack of concentration and interest on the part of informants c) no consistent way of providing the informant with a clue in case the informant is unfamiliar with the word represented by the picture or the sentence. d) no reliable means for the speech-language pathologist to analyze and evaluate the informant's speech in relation to the standard pronunciation A multimedia version of Lee-Kim Korean articulation Test which features picture and word as well as recorded voice has been developed with a view to eliminating the limitation mentioned above and facilitating the articulation test-with ease and accuracy.

• Biomolecules & Therapeutics
• /
• v.3 no.3
• /
• pp.242-244
• /
• 1995

In vitro cell culture system has been proposed as a promising alternative model to in vivo skin irritation test. These studies were performed to screen the cytotoxicity effects of surfactants using normal human skin fibroblasts. Cell membrane integrity assessed by the leakage of lactate dehydrogenase (LDH) and mitochondrial integrity by MTT [3-(4, 5-dimethylthiazol-2-yl)-2, 5-diphenyl tetrazolium bromides reduction test were affected in a dose dependent manner. The irritation potential of surfactants to human skin patch test, and the changes of capillary permeability by rabbit intradermal safety test were assessed as in vivo methods. Our results suggest that LDH leakage assay and MTT reduction test using cultured human fibroblasts could be predictive for the irritancy of various surfactants in human, and LDH assay is superior correlated with in vivo test (r=0.886) to MTT test with in vivotest (r=0.757).

• Archives of Pharmacal Research
• /
• v.29 no.6
• /
• pp.459-463
• /
• 2006

Previous studies on the anticonvulsant activity of $N-Cbz-{\alpha}-aminoglutarmides$ have shown that the derivatives of $N-Cbz-{\alpha}-amino-N-alkoxy$ glutarimide have significant anticonvulsant activity. In addition, their anticonvulsant activities are dependent on the presence of N-alkoxy groups. Based on these results, a series of $N-Cbz-{\alpha}-amino-glutarimidooxy$ carboxylates derivatives (3a-e) were synthesized in moderate yield using a known synthetic procedure. Their anticonvulsant activities were evaluated using the maximal electroshock seizure (MES) test, the pentylene tetrazole induced seizure (PTZ) test, and the strychinine (Str) threshold test with the ultimate aim of developing more active anticonvulsants. None of the compounds (3a-e) tested showed anticonvulsant activity in the MES and PTZ test. However, all the compounds tested exhibited significant anticonvulsant activity in the Str. test. The most active compound in the Str. test was the methyl ester of $N-Cbz-{\alpha}-amino-glutarimidooxy$ acetic acid 3a $(ED_{50}\;=\;42.9\;mg/kg)$.

• Journal of Technologic Dentistry
• /
• v.35 no.4
• /
• pp.287-293
• /
• 2013

Purpose: This study is to provide basic data of the dental acrylic denture base resin in the mechanical property difference investigation according to the monomer composition weight ratio of the acrylic denture base resin. Methods: The monomer composition of the acrylic denture base resin and weight ratio makes the different specimen. It measured the mechanical property with the specimens through Hardness Test, Tensile Test, Flexural Test, Flexural Modulus, FT-IR Test. Results: The control group Vertex was 18.4 Hv and the experimental group MED was 14.46~19.07Hv in the hardness test. Vertex was 364N, MED-3 was lowest in the tensile strength test and the Head of a family cursor declination was big. The result declination of the experimental specimens showed. Vertex and MED-2 was the highestest in the flexural test and after coming MED-6, MED-5, MED-1, MED-3, MED-4. Vertex and MED-2, as to a spectrum for $500{\sim}1800cm^{-1}$ peak can show the excellent degree of polymerization in the FT-IR Test. Conclusion: The ideal weight ratio of the monomer of the acrylic denture base resin of which the mechanical property is the highestest was MMA 100g, EDGMA 5g, DMA 0.2g, of MED-2.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.4
• /
• pp.16-22
• /
• 2012

We performed impact test to estimate necessary explosive charge weight for cutting the cable whose diameter is 22 mm. The impact test results were analyzed by Probit method. The cutting energy was calculated 37.7 J with 99.99% probability at 99% reliability compared to the average energy of 24.9 J. The cable was cut 3 times without failure with 150 mg of Zirconium Potassium Perchlorate (ZPP), which was considered to generate 24.5 J of mechanical energy with assumption that only 10% of explosive energy converts to mechanical energy. The calculated energy from measured pressure with 150 mg ZPP was 26.1 J, which is almost same with both impact test result and expected mechanical energy. We can argue that the cable can be cut with 99.99% probability at 99% reliability by 230 mg of ZPP.

• Nuclear Engineering and Technology
• /
• v.51 no.4
• /
• pp.1142-1153
• /
• 2019

This paper presents the effect of fusion procedure on the fusion performance of the thermal butt fusion in the safety class III buried HDPE piping per various tests performed, including high speed tensile impact, free bend, blunt notched tensile, notched creep, and PENT tests. The suitability of fusion joints and qualification procedures was evaluated by comparing test results from the base material and buttfusion joints. From the notched tensile test result, it was found that the fused joints have much lower toughness than the base material. It was also identified that the notched tensile test is more desirable than the high speed tensile impact and free bend tests presented in the ASME Code Case N-755-3 as a fusion qualification test method. In addition, with regard to the single low-pressure fusion joint performances, the procedure given by the ISO 21307 was determined to be better that the one specified in the Code Case N-755-3.

• Smart Media Journal
• /
• v.10 no.3
• /
• pp.54-59
• /
• 2021

Flight data acquired through flight instrumentation equipment during aircraft development play an important role in aircraft development and performance improvement. Therefore, as the reliability of flight instruments is required, inspection systems to check the soundness of flight instruments are very important. In this paper, we analyze the existing test system for flight data instrumentation equipment and present improvements in the hardware and software aspects of the test system. Based on this, we design and implement a test system with improved performance and present test results. Test system with improved performance improves cost savings, flexible application, and maintenance compared to the existing test system. Therefore, the robustness of the instrumentation equipment can be obtained, which can be expected to improve the reliability of flight data.