• 한국세라믹학회:학술대회논문집
• /
• 한국세라믹학회 2002년도 추계총회 및 연구발표회 초록집
• /
• pp.208.1-208
• /
• 2002

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1175-1178
• /
• 2005

Brittle materials, especially single-crystal silicon wafer, are widely used for sensors, IC industry, and MEMS applications. e general machining process of crack easy materials is by chemical agents, but it is hazardous and time consuming. Also, it is difficult to get high aspect ratio micro structure. As an alternative tool, an AJM(Abrasive jet machining) is promising method in terms of high aspect ratio and production cost. In this study, to get more precise detail compared to general AJM, photo polymer mask, SU-8, used in photolithography was applied in AJM. Process parameters such as abrasive diameter, air pressure, nozzle diameter, flow rate of abrasive in AJM and a variety of conditions in spin coating were decided. Finally, micro channel and mixer was fabricated to see the efficiency of the AJM with photo polymer mask.

• Bulletin of the Korean Chemical Society
• /
• 제31권8호
• /
• pp.2395-2398
• /
• 2010

• 폴리머
• /
• 제35권5호
• /
• pp.378-384
• /
• 2011

실크 피브로인은 생체적합성과 비독성 및 비면역 특성을 갖는 생분해성 천연고분자로서, 콜라겐의 가수분해로부터 유래되는 천연물질인 젤라틴을 이용하여 실크 피브로인/젤라틴 지지체를 제조하였다. 지지체의 최적화 조건을 찾기 위하여 실크 피브로인의 양과 젤라틴 및 글루타알데히드의 농도를 다르게 하여 제조하였다. 실크 피브로인/젤라틴 지지체는 SEM과 DSC 및 수분흡수성 평가를 통해 특성분석을 하였으며 세포생존율 및 증식률은 WST 방법을 통해 평가되었다. 이 결과 실크 피브로인 0.3 g 지지체에 8% 젤라틴 및 1% 글루타알데히드를 함유한 지지체에서 세포 부착 및 증식을 위해 가장 적합한 특성을 제공한다고 제안되었다. 결과적으로, 실크 피브로인/젤라틴 지지체는 잠재적인 세포 전달체 및 조직공학을 위한 구조 기반역할을 할 수 있을 것으로 사료된다.

• Current Optics and Photonics
• /
• 제1권2호
• /
• pp.157-162
• /
• 2017

In large liquid crystal displays, the image quality in an oblique viewing direction is a crucial issue. From this perspective, 8-domain polymer-stabilized vertical alignment (PS-VA) mode has been developed to suppress the color shift in oblique viewing directions, compared to that in 4-domain PS-VA mode. To realize the 8-domain PS-VA, the four domains in a pixel are each divided into two regions, such that applying different electric potentials result in different tilt angles in these two regions, while keeping four azimuthal directions in each domain. However, applying different voltages in a pixel causes drawbacks, such as requiring additional processes to construct a capacitor and a transistor, which will further reduce the aperture ratio. Here we propose a different approach to form the 8-domain, by controlling surface polar anchoring energy and the width of patterned electrodes in two regions of a pixel. As a result, the gamma-distortion index (GDI), measured at an azimuthal angle of $0^{\circ}$, is reduced by about 23% and 8%, compared to that of a conventional 4-domain at polar angles of $30^{\circ}$ and $60^{\circ}$ respectively.

• 한국레이저가공학회지
• /
• 제10권2호
• /
• pp.17-24
• /
• 2007

We have studied a laser direct writing lithography(LDWL). This is more important to apply to micro patterning using UV laser. We demonstrate the possibility of LDWL and construct the fabrication system. We use Galvano scanner to process quickly micro patterns from computer data. And laser beam is focused with $F-{\theta}$ lens. AZ5214 and SU-8 photoresist are chosen as experimental materials and a kind of well-known positive and negative photoresist respectively. Laser ablation mechanism depends on the optical properties of polymer. In this paper, therefore we investigate the phenomenon of laser ablation according to the laser fluence variation and measure the shape profile of micro patterned holes. From these experimental results, we show that LDWL is very useful to process various micro patterns directly.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1613-1616
• /
• 2007

A microgripper using thermal actuator and SU-8 polymer was designed and fabricated to manipulate cells and microparts. A chip size of a microgripper was 3 mm ${\times}$ 5 mm. The thermally actuated microgripper consisted of two couples of hot and cold arm actuators. The high thermal expansion coefficient, 52 $ppm/^{\circ}C$, of SU-8 compared to silicon and metals, allows the actuation of the microgripper. Thickness and width of SU-8 as an end-effector were 26 ${\mu}m$ and 80 ${\mu}m$, respectively. Initial gap between left jaw and right jaw was 120 ${\mu}m$. The ANSYS program as FEM tool was introduced to analyze the thermal distribution and displacement induced by thermal actuators. $XeF_2$ gas was used for isotropic silicon dry etching process to release SU-8 end-effector. Mechanical displacements of the fabricated microgripper were measured by optical microscopy in the range of input voltage from 0 V to 2.5 V. The maximum displacement between two jaws of a microgripper Type OG 1_1 was 22.4 ${\mu}m$ at 2.5 V.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2009년도 추계학술대회 논문집
• /
• pp.176-176
• /
• 2009

대전제어제를 이용하여 양과 음의 전하량을 가지는 토너 입자를 제조하였다. polymer bead와 대전제어제를 각각 용매에 녹인 후 중합하였으며 토너 입자의 크기는 약 $8{\mu}m$로 제조되었고 제조된 토너 입자의 전하질량비를 측정하기 위하여 polymer bead의 전하량과 대전제어제가 중합된 토너 입자의 전하질량비를 측정하여 비교하였다. 양의 전하량을 갖는 토너 입자는 약 34.12uC/g로 측정되었고, 음의 전하량을 갖는 토너 입자는 약 -22.5uC/g으로 측정되었으며, 또한 대전제어제가 가지는 양과 음의 특성에 따라 polymer bead의 특성 또한 바뀌는 것을 관찰 할 수 있었다.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제22권1호
• /
• pp.83-85
• /
• 2000

The purpose of this study is to evaluate the effect of $HTR^{TM}$ (hard tissue replacement, Bioplant Inc, U.S.A) polymer on short-term healing as a grafting material for alveolar ridge augmentation. A 48-year-old female presented insufficient bone height and width for the placement of implants. $HTR^{TM}$ polymer was used for ridge augmentation. Bone biopsy was harvested 8 months after the ridge augmentation procedure. $HTR^{TM}$ polymer displayed rapid bone regeneration and mature lamellar and trabecular bone redevelopment. Clinical and histologic observation from the treatment of the patient presented suggest that $HTR^{TM}$ polymer seems to be a appropriate material for alveolar ridge augmentation.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2011년도 제40회 동계학술대회 초록집
• /
• pp.383-383
• /
• 2011

We fabricated thermal annealing-free polymer solar cells (PSC) by processing with additive and applied to flexible substrates. The 1, 8-Diiodooctane of 3 vol% blended with active solution resulted in enhancement of $J_{SC}$ due to increase of light absorption and hole mobility as improving the crystallinity of P3HT. In addition, the $V_{OC}$ of PSCs with additive was improved by inserting $TiO_2$ layer without any treatment. The $TiO_2$ layer prevented the direct contact between active layer and Al electrode and reduced the charge recombination near Active/Al interface. It was confirmed by calculation of J0 and photo-voltage transient measurement. The power conversion efficiencies of annealing-free PSCs using additive for ITO glass and flexible (ITO PEN) substrate were obtained 3.03% and 2.45%, respectively.