• 한국표면공학회지
• /
• 제28권2호
• /
• pp.110-118
• /
• 1995

The effect of reductants (Ti, Si, Al, Mn, Fe) addition into molten Borax has been studied on oxidation resistance and the growth of boronized layer formed during electro-boronizing on the substrate such as carbon steel and STS 430. Experiments have been carried out at the current density of 0.5 A/$\cm^2$ and in temperature range of 600~$1000^{\circ}C$ for 1~5 hours. The penetrated depth of the boron increased with addition of reductants (Ti, Si, Al) and decreased with addition of Mn and Fe. But excessive addition of reductants inhibited the boronizing due to an increase in viscosity of electrolyte. Oxidation resistance of the boronized carbon steel was improved but that of the boronized STS 430 decreased.

• 한국지구과학회지
• /
• 제44권4호
• /
• pp.318-330
• /
• 2023

This study aimed to verify the validity of a measurement tool for Vietnamese high school students' systems thinking abilities. Two quantitative assessment tools, the Systems Thinking Measuring Instrument (Lee et al., 2013) and the Systems Thinking Scale (Dolansky et al., 2020), were used to measure students' systems thinking after translation into Vietnamese. As a result, it was revealed that Cronbach-α for each tool (i.e., STMI and STS) was .917 and .950, respectively, indicating high reliability for both. To validate the construct validity of the translated questionnaire, exploratory factor analysis was performed using SPSS 26.0, and confirmatory factor analysis was performed using AMOS 21.0. For concurrent validity, correlation analysis using structural equation modeling was performed to validate the translated questionnaire. Exploratory factor analysis revealed that 10 items from the STMI and 12 items from the STS loaded on the intended factors and appropriate factor loading values were obtained. For confirmatory factor analysis, a structural equation model organized with 10 items from the STMI and 12 items from the STS was used. The result of this showed that the convergent validity values of the model were all appropriate, and the model fit indices were analyzed to be χ²/df of 1.892, CFI of .928, TLI of .919, SRMR of .047, and RMSEA of .063, indicating that the model consisting of the 22 items of the two questionnaires was appropriate. Analysis of the concurrent validity of the two tools indicated a high correlation coefficient (.903) and high correlation (.571-.846) among the subfactors. In conclusion, both the STMI and STS are valid quantitative measures of systems thinking, and it can be inferred that the systems thinking of Vietnamese high-school students can be quantitatively measured using the 22 items identified in our analysis. Using the tool validated in this study with other tools (e.g., qualitative assessment) can help accurately measure Vietnamese high school students' systems thinking abilities. Furthermore, these tools can be used to collect evidence and support effective education in ODA projects and volunteer programs.

• 마이크로전자및패키징학회지
• /
• 제22권3호
• /
• pp.67-72
• /
• 2015

히트 싱크용 소재에 응용할 목적으로 단층금속과 2층금속 클래드메탈에 대해 열전도 특성에 대한 연구를 하였다. 단층시편으로는 스테인리스강과 알루미늄을 선택하였으며, 2층 금속으로는 스테인리스강과 알루미늄을 압연해서 제조한 클래드메탈을 사용하였다. 열전도도는 섬광법으로 측정한 열확산계수와 비열 및 밀도를 사용해 얻었다. 실험을 통해 얻은 측정값을 참고문헌에 보고된 자료를 사용해 얻은 계산값과 비교하였다. 단층시편의 경우, 실험을 통해 얻는 열확산계수와 열전도도는 계산값보다 작았다. 스테인리스강의 경우, 측정한 열전도도는 계산값에 비해 6% 정도 작았으며, 알루미늄의 경우 18% 정도 작았다. 반면, 2층 금속인 스테인리스강과 알루미늄의 클래드메탈은 측정한 열전도도가 계산값에 비해 55% 정도 낮게 나타났다. 섬광법으로 측정한 열전도도가 계산값보다 55% 정도 낮게 나타난 이유는 스테인리스강과 알루미늄의 사이에 존재하는 계면의 영향 때문이다. 스테인리스강과 알루미늄의 사이에 존재하는 계면은 열전도 특성을 지배하는 전자와 탄성파의 이동을 어렵게 하기 때문이다. 우수한 방열특성을 갖는 다층구조 방열모듈을 개발하기 위해서는 열전도 특성에 결정적으로 영향을 주는 계면 특성의 조절이 중요하다.

• 한국분말재료학회지
• /
• 제22권3호
• /
• pp.197-202
• /
• 2015

In this study, porous stainless steel (STS316L) sintered body was fabricated by powder metallurgy method and its properties such as porosity, compressive yield strength, hardness, and permeability were evaluated. 67.5Fe-17Cr- 13Ni-2.5Mo (wt%) powder was produced by a water atomization. The atomized powder was classified into size with under $45{\mu}m$ and over $180{\mu}m$, and then they were compacted with various pressures and sintered at $1210^{\circ}C$ for 1 h in a vacuum atmosphere. The porosities of sintered bodies could be obtained in range of 20~53% by controlling the compaction pressure. Compressive yield strength and hardness were achieved up to 268 MPa and 94 Shore D, respectively. Air permeability was obtained up to $79l/min{\cdot}cm^2$. As a result, mechanical properties and air permeability of the optimized porous body having a porosity of 25~40% were very superior to that of Al alloy.

• Steel and Composite Structures
• /
• 제45권2호
• /
• pp.205-218
• /
• 2022

Proper calculation of splitting tensile strength (STS) of concrete has been a crucial task, due to the wide use of concrete in the construction sector. Following many recent studies that have proposed various predictive models for this aim, this study suggests and tests the functionality of three hybrid models in predicting the STS from the characteristics of the mixture components including cement compressive strength, cement tensile strength, curing age, the maximum size of the crushed stone, stone powder content, sand fine modulus, water to binder ratio, and the ratio of sand. A multi-layer perceptron (MLP) neural network incorporates invasive weed optimization (IWO), cuttlefish optimization algorithm (CFOA), and electrostatic discharge algorithm (ESDA) which are among the newest optimization techniques. A dataset from the earlier literature is used for exploring and extrapolating the STS behavior. The results acquired from several accuracy criteria demonstrated a nice learning capability for all three hybrid models viz. IWO-MLP, CFOA-MLP, and ESDA-MLP. Also in the prediction phase, the prediction products were in a promising agreement (above 88%) with experimental results. However, a comparative look revealed the ESDA-MLP as the most accurate predictor. Considering mean absolute percentage error (MAPE) index, the error of ESDA-MLP was 9.05%, while the corresponding value for IWO-MLP and CFOA-MLP was 9.17 and 13.97%, respectively. Since the combination of MLP and ESDA can be an effective tool for optimizing the concrete mixture toward a desirable STS, the last part of this study is dedicated to extracting a predictive formula from this model.

• Journal of Welding and Joining
• /
• 제9권4호
• /
• pp.17-27
• /
• 1991

The direct brazing technology which could be used for the simplification of brazing process and the improvement of brazed joint quality was studied with $Al_2O_3$ and stainless steels. The brazing of $Al_2O_3$ to STS304 or STS430 was performed under different brazing conditions such as brazing filler metal, temperature, heating rate and brazing time. Microstructural observation and chemical analysis be SEM/EPAM were carried out to verify the quality of brazed joints. 4-point bending strength of brazed joints was also measured to find the optimal brazing conditions. The results showed that, in brazing of $Al_2O_3$, the mixed oxide layer resulted from the reaction between Ti in filler metal and oxide layer on the material surface to be brazed was found to be bery important for the joint quality. The width of oxide layer varied with the brazing conditions such as brazing time, heating rate and chemical composition of filler metals. The strength of brazed joints was more affected by the type of materials and their thermal properties than by brazing heat cycle.

• 한국표면공학회지
• /
• 제31권6호
• /
• pp.325-333
• /
• 1998

A duplex surface treatment process of simultaneous aluminizing-chromizing process followed by plasma nitriding was performed on AISI HI3 steel and STS 403 steel. The properties of these duplex-treated steels were investigated and were compared with those of steels treated by single process of either simultaneous aluminizing-chromizing or plasma nilriding, in terms of microstructure, microhardness and high temperature wear resistance. Sim~dtaneous alumizing-chromizing process was done using a 2-step coating cycle and plasma nitriding process was done at $530^{\circ}C$ for 1.5 hour. AISI HI3 steel and STS 403 steel showed a FeA1 compound layer of approximately 350$\mu\textrm{m}$ thickness on the surface after simultaneous diffusion coating and nitrided layer of approximately 70-80$\mu\textrm{m}$ formed after the subsequent plasma nitriding process. The microhardness was improved much more by the duplex surface heatment than only by plasma nitriding. In addition the duplex treated specimens showed an improved high temperature wear resistance.

• 한국산업융합학회 논문집
• /
• 제20권3호
• /
• pp.221-232
• /
• 2017

In this study, bipolar plates in fuel cells are formed using rubber forming process. The effects of important parameters in rubber forming such as hardness and thickness of rubber pad, speed and pressure of punch that compress blank, and physical property of materials on the channel depth were analyzed. In the soft material sheet Al1050, deeper channels are formed than in materials STS304 and Ti-G5. Formed channel depth was increased when hardness of rubber pad was lower, thickness of rubber pad was high, and speed and pressure of punch were high. It was found the deepest channel was achieved when forming process condition was set with punch speed and pressure at 30 mm/s and 55 MPa, respectively using rubber pad having hardness Shore A 20 and thickness 60 mm. The channel depths of bipolar plates formed with Al1050, STS304 and Ti-G5 under the above process condition were 0.453, 0.307, and 0.270 mm, respectively. There were no defects such as wrinkle, distortion, and crack found from formed bipolar plates.

• Journal of Welding and Joining
• /
• 제30권2호
• /
• pp.47-53
• /
• 2012

This paper aimed to study and understand the mechanical phenomena of thermal elasto-plastic behavior on the dissimilar butt joint (Al 6061-T6 and STS304) by TIG assisted Friction Stir Welding. Heat conduction and residual stress analysis is carried out using in-house solver. Two-dimensional results of the heat distribution and residual stresses in dissimilar joint for particular tool geometry and material properties are presented. The predicted stress along longitudinal direction in Al 6061-T6 and STS304 are approximately between 12-15% of their respective yield strengths. A comparison is made between experimentally measured and numerically predicted equivalent residual stress values.

• Corrosion Science and Technology
• /
• 제9권1호
• /
• pp.39-47
• /
• 2010

Galvanic coupling between GECM(graphite epoxy composite material) and metallic materials can facilitate corrosion of metals and alloys because GECM is noble and electrically conductive. Galvanic corrosion is affected by many factors including metallic materials, area ratio, surface condition, and corrosivity. This work aims to evaluate the effect of area ratio on galvanic corrosion between GECM and several metals. In the case of glavanic coupling of carbon steel and Al to GECM, corrosion rate increased with increasing area ratio. Corrosion rate of sensitized STS 316S stainless steel decreased a little at an area ratio 1:1 but increased at an area ratio 30:1. It is considered to be due to that area ratio affects galvanic corrosion more in less corrosion resistant alloys. However, in case of STS 316 and Ti, galvanic coupling reduces corrosion rate by the formation of passive film.