• Journal of the Korean earth science society
• /
• v.37 no.4
• /
• pp.187-199
• /
• 2016

The purpose of this study is to investigate the formation mechanism of landspout by using the Cloud Resolving Storm Simulator (CReSS). The landspout occurred over Ilsan, Goyang City, the Republic of Korea on June 10, 2014 with the damage of a private property. In synoptic environment, a cold dry air on the upper layers of the atmosphere, and there was an advection with warm and humid air in the lower atmosphere. Temperature differences between upper and lower layers resulted in thermal instability. The storm began to arise at 1920 KST and reached the mature stage in ten minutes. The cloud top height was estimated at 9 km and the hook echo was appeared at the rear of a storm in simulation result. Model results showed that the downburst was generated in the developed storm over the Ilsan area. This downburst caused the horizontal flow when it diverged near the surface. The horizontal flow was switched to updraft at the rear of storm, and the rear-flank downdrafts (RFDs) current occurred from simulation result. The RFDs took down the vertical flow to the surface. After then, the vertical vorticity could be generated on the surface in simulation result. Subsequently, the vertical vorticity was stretched to form a landspout. The cyclonic vorticity of echo hook from simulation was greater than $3{\times}10^{-2}s^{-1}$(height of 360 m) and landspout diameter was estimated at 1 km.

• The korean journal of orthodontics
• /
• v.35 no.3 s.110
• /
• pp.196-206
• /
• 2005

This study was undertaken to investigate the effect of vitamin C deficiency on the orthodontic tooth movement and bony remodeling processes. Thirty six male guinea pigs were divided on the basis of the given amount of vitamin C (normal group: 5mg/day, deficient group: 0.2mg/day) and 75gm of force was applied to the maxillary incisors. Experimental animals were sacrificed at day 0. day 1 day 3, day 5. day 7 and day 14 after force application and the amount of tooth movement was measured and tissues were studied histologically. The results showed that the amount of collagen fiber in the periodontal ligament and alveolar bone of the deficient group was less than that of the normal group. In the stretched side. the osteoblastic activity and alveolar bone formation of the normal group increased in a time dependent manner during experimental periods, but the deficient group showed less activity and formation. The amount of tooth movement in the deficiency group was more than in the normal group at day 0. day 1, day 3, day 5, and day 7. According to the above results, a deficiency of vitamin C resulted in a defect of collagen synthesis of the periodontium and inhibition of bone formation and stimulation of bone resorption with rapid tooth movement in early periods of force application.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.1
• /
• pp.17-22
• /
• 2011

ZnO-based thin-film transistors (TFTs) have been fabricated and the mechanical characteristics of electric circuits, such as stress, strain, and deformation are analyzed by the finite element method (FEM). In this study, a mechanical-stability design guide for such systems is proposed; this design takes into account the stress and deformation of the bridge to estimate the stress distribution in an $SiO_2$ film with 0 to 5% stretched on 0.5-${\mu}m$-thick. The predicted buckle amplitude of $SiO_2$ bridges agrees well with experimental results within 0.5% error. The stress and strain at the contact point between bridges and a pad were measured in a previous structural analysis. These structural analysis suggest that the numerical measurement of deformation, SU-8 coating thickness for Neutral Mechanical Plane (NMP) and ITO electrode size on a dielectric layer was useful in enhancing the structural and electrical stabilities.

• Journal of Korean Society for Atmospheric Environment
• /
• v.26 no.5
• /
• pp.475-489
• /
• 2010

In order to verify the enhancement of ozone and carbon monoxide (CO) during springtime in East Asia, we investigated weather conditions and data from remote sensors, air quality models, and air quality monitors. These include the geopotential height archived from the final (FNL) meteorological field, the potential vorticity and the wind velocity simulated by the Meteorological Mesoscale Model 5 (MM5), the back trajectory estimated by the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model, the total column amount of ozone and the aerosol index retrieved from the Total Ozone Mapping Spectrometer (TOMS), the total column density of CO retrieved from the Measurement of Pollution in the Troposphere (MOPITT), and the concentration of ozone and CO simulated by the Model for Ozone and Related Chemical Tracers (MOZART). In particular, the total column density of CO, which mightoriginate from the combustion of fossil fuels and the burning of biomass in China, increased in East Asia during spring 2000. In addition, the enhancement of total column amounts of ozone and CO appeared to be associated with both the upper cut-off low near 500 hPa and the frontogenesis of a surface cyclone during a weak Asian dust event. At the same time, high concentrations of ozone and CO on the Earth's surface were shown at the Seoul air quality monitoring site, located at the surface frontogenesis in Korea. It was clear that the ozone was invaded by the downward stretched vortex anomalies, which included the ozone-rich airflow, during movement and development of the cut-off low, and then there was the catalytic photochemical reaction of ozone precursors on the Earth's surface during the day. In addition, air pollutants such as CO and aerosol were tracked along both the cyclone vortex and the strong westerly as shown at the back trajectory in Seoul and Busan, respectively. Consequently, the maxima of ozone and CO between the two areas showed up differently because of the time lag between those gases, including their catalytic photochemical reactions together with the invasion from the upper troposphere, as well as the path of their transport from China during the weak Asian dust event.

• The Korean Journal of Mycology
• /
• v.30 no.2
• /
• pp.73-77
• /
• 2002

This study was conducted to investigate morphological characteristics of veiled lady mushroom (Dictyophora sp.). Morphological observation of mycelium showed the presence of chlamydospore-like swelling cells, and typical mycelial champ connections. Fruiting body of the veiled lady mushroom consists of cap, velum, stipe, and vulva. Oval-shaped eggs were surrounded by exodermis, gelatin layers and endodermis, and the fruiting bodies remained inside volva as liquid gelatin layer. Dark green spore layer was formed at the top of cap. The surface eggs in the cultivated veiled lady mushroom was covered with white needle-shaped mycelial projection that was oval in shape. The velum of fruiting body stretched down to the top of volva. The net was regularly shaped, and smelled like fragrance with chestnut flower. The strain KACC 50650 was identified as Dictyophora echinovolvata based on the morphology of eggs and fruiting bodies, and named as Huin-Dol-Gi-Mang-Tae mushroom in Korean.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.6
• /
• pp.841-845
• /
• 2003

In order for engineered tissues to find clinical utility, the engineered tissues must function appropriately. However, smooth muscle (SM) tissues engineered in vitro with a conventional tissue engineering technique may not exhibit contractile functions, because smooth muscle cells (SMCs) cultured in vitro typically revert from a contractile, differentiated phenotype to a synthetic, nondifferentiated phenotype and lose their ability to contract. SMCs in vivo typically reside in mechanically dynamic environments. We hypothesized that cyclic mechanical stretch induces the features of SMCs in in vitro engineered tissues to be similar to those of SMCs in native tissues. To test the hypothesis, aortic SMCs were seeded onto elastic, three-dimensional scaffolds and cultured in vitro under a cyclic mechanical stretching condition for 4 weeks. A significant cell alignment in a direction parallel to the cyclic stretching direction was found in the SM tissues exposed to cyclic stretching. The cellular alignment and alignment direction were consistent with those of native vascular SM tissues, in which SMCs in vivo align in the radial direction (parallel to stretching direction). In control tissues (SM tissues engineered without stretching), cells randomly aligned. The expression of SM ${\alpha}-actin$ and SM myosin heavy chain, phenotypic markers of SMCs in a contractile state, was upregulated in the stretched tissues by 2.5- and 2.0-fold, respectively, compared to SMCs in the control tissues. The cellular features of alignment and contractile phenotype of SMCs in the SM tissues engineered under a mechanically dynamic environment could allow the engineered SM tissues to exhibit contractile functions.

• The Korean Journal of Pharmacology
• /
• v.15 no.1_2 s.25
• /
• pp.29-37
• /
• 1979

The tension-length relationships and reactivity of vascular smooth muscle in longitudinal strips from portal vein ana in helical strips from thoracic aorta and pulmonary artery of normotensive control and cadmium-hypertensive rabbits were studied in vitro. 1. The mean arterial pressures of non-poisoned control rabbits was $87.0{\pm}4.7 mmHg$. However, Cd-poisoned group revealed the significant increase in pressure by $109.04{\pm}2.8 mmHg$ (p<0.005). 2. By tension-length studies, strips from portal vein of Cd-poisoned group stretched a greater percent increase in length in response to an applied resting force from 0.25 to 5 g than did those from non-poisoned group. On the contrary, strips from thoracic aorta of Cd-poisoned group showed less compliant than those from control, i.e. the former underwent a less percent increase in length than the latter. Passive tension-length relations of pulmonary artery was unaffected by Cd-hypertension. 3. The force of contraction(active tension) was significantly lowered in strips from aorta of Cd-hypertensive group throughout the range of $0.5{\sim}2g$ passive tension. However, there was no significant difference in the development of active tension of portal vein or pulmonary artery of both groups. 4. The $K^+$-contraction in the portal vein, aorta and pulmonary artery of Cd-poisoned group made no difference in the active force from those of control group. 5. The force of contraction in the strips from aorta of Cd-poisoned group was significanty decreased compared to that of control. The results suggested that the alterations in vascular reactivity to contracting substances and in distensibility to passive tension were induced in the Cd-hypertensive rabbits.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.32 no.1
• /
• pp.1-9
• /
• 2014

The purpose of this study was to identify the landscape characteristics of Youngnam-Lu by performing text analysis of related Korean poems over 600 years. A total of 354 poems were quantitatively analyzed for keywords and terms in particular categories such as nature. As a subsidiary analysis, topographic map was examined using CAD along with analysis of antique maps. Of the 354 poems reviewed, keywords frequently used are: 'Scenic sites'- 56 times, 'Long river' (長江) and 'Long stretched forest'(長林) - 39 times each, 'Superb scenery'- 31 times, 'Large field scenery'- 19 times, and 'Thousand-layered mountain view' - 14 times. In total, these keywords occurred 159 times in 44.9 % of these poems.1) The words used frequently in these poems, especially for those fall under category of nature, can be scored into different subcategories such as natural phenomena and geographical features. Occurrences of terms in each subcategory were main criteria for the analysis and the following is a list of subcategories with frequency in descending order: Natural phenomena (44%), geographical features (33%), plants (14%), and animals (9%). Among natural phenomena, phenomena related to sky were most frequent, 41 times, which might be due to superb sky view from Youngnam-Lu. Also geographical features of Youngnam-Lu were reflected in these poems, and the most prominent features were 'flow of the river' and 'Sand island' located in the Milyang River. These poems contained fairly large number of terms related to musical instruments (8%) which suggest that Young-Nam-Lu as a place where various musical instruments performances were held.

• Fisheries and Aquatic Sciences
• /
• v.23 no.6
• /
• pp.16.1-16.10
• /
• 2020

This study was conducted in Lake Hayq between January and December 2018. The objectives of this study were to determine the growth, condition, sex ratio, fecundity, length at first sexual maturity (L₅₀), and spawning seasons of common carp (Cyprinus carpio). Monthly fish samples of C. carpio were collected using gillnets of stretched mesh sizes of 4, 6, 7, 8, 10, and 13 cm and beach seines of mesh size of 6 cm. Immediately after the fish were captured, total length (TL) and total weight (TW) for each individual were measured in centimeters and grams, respectively, and their relationship was determined using power function. Length at first maturity (L₅₀) was determined for both males and females using the logistic regression model. The spawning season was determined from the frequency of mature gonads and variation of gonadosomatic index (GSI) values of both males and females. Fecundity was analyzed from 67 mature female specimens. The length and weight relationship of C. carpio was TW = 0.015TL^2.93 for females and TW = 0.018TL^2.87 for males that indicate negative allometric growth in both cases. The mean Fulton condition factor (C_F) was 1.23 ± 0.013 for females and 1.21 ± 0.011 for males. The value of C_F in both cases was > 1 that shows both sexes are in good condition. Among the total 1055 C. carpio collected from Lake Hayq, 459 (43.5%) were females and 596 (56.5%) were males. The chi-square test showed that there was a significant deviation between male and female numbers from 1:1 ratio (χ²= 22, df = 11, P > 0.05) within sampling months. The length at first sexual maturity (L₅₀) for females and males were 21.5 and 17.5 cm, respectively. Males mature at smaller sizes than females. The spawning season of C. carpio was extended from February to April, and the peak spawning season for both sexes was in April. The average absolute fecundity was 28,100 ± 17,462. C. carpio is currently the commercially important fish while Nile tilapia fishery has declined in Lake Hayq. Therefore, this baseline data on growth, condition, and reproductive biology of common carp will be essential to understand the status of the population of carp and design appropriate management systems for the fish stock of Lake Hayq, Ethiopia, and adjacent countries.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.27-40
• /
• 2004

The objective of this study is to identify the kinematic variables of giant swing backward to handstand as well as individual variations of each athlete performing this skill, which in turn will provide the basis for developing suitable training methods and for improving athlete's performance in actual games. For this end, 3 male athletes, members of the national team, who are in ${\Box}{\Box}H{\Box}{\Box}$ University, have been randomly chosen and their giant swing backward to handstand performance was recorded using two digital cameras and analyzed in 3 dimensional graphics. This study came to the following conclusion. 1. Proper time allocation for giant swing backward to handstand are: Phase 1 should provide enough time to attain energy for swing track of a grand round movement. The phase 3 is to throw the body up high in the air and stay in the air as long as possible to smoothen up the transition to the next stage and the phase 4 should be kept short with the moment arm coefficient of the body reduced. 2. As for appropriate changes of locations of body center, the phase 1 should be comprised of horizontal, perpendicular, compositional to make up a big rotational radius. Up to the Phase 3 the changes of displacements of vertical locations should be a good scale and athlete's body should go up high quickly to increase the perpendicular climbing power 3. When it comes to the speed changes of body center, the vertical and horizontal speed should be spurred by the reaction of the body in Phase 2 and Phase 3. In the Phase 4, fast vertical speed throws the body center up high to ensure enough time for in-the-air movement. 4. The changes of angles of body center are: in Phase 2, shoulder joint is stretching and coxa should be curved up to utilize the body reaction. In the Phase 4, shoulder joint and coxa should be stretched out to get the body center as high as possible in the air for stable landing. 5. The speeds of changes in joints angles are: in the Phase 2 should have the speed of angles of shoulder joints increase to get the body up in the air as quickly as possible. The Phase 3 should have the speed of angles in shoulder joint slow down, while putting the angles of a knee joint up to speed as quickly as possible to ensure enough time for in-the-air movement.