• 한국운동역학회지
• /
• 제22권3호
• /
• pp.333-339
• /
• 2012

Freezing of gait is a severely problem in people with Parkinson's disease. The purpose of this study was to investigate the muscle activities of adductor longus, gluteus medius, gluteus maximus, biceps femoris, rectus femoris, gastrocnemius, and tibialis anterior using Noraxon 8 channels EMG system during stop task in patients with Parkinson's disease. Seven parkinson's patients and age matched normal participants were recruited in the study. Filtered EMG signals were rectified, smoothed and integrated. To control for the altered timing and magnitude of activity, iEMG was normalized for time and peak value. The results indicated that the patients with Parkinson showed decreased gait cycle, stance phase, swing phase time, swing phase time ratio and increased stance phase time ratio than normal participants. The patients with Parkinson showed decreased gastrocnemius muscle activity time ratio, while increased tibialis anterior muscle activity time ratio than normal participants. During stance phase before stop, the patients with Parkinson showed relatively lower average and peak iEMG in anterior tibialis and gastrocnemius muscle than normal participants. During swing phase before stop, the patients with Parkinson showed relatively higher average iEMG in gastrocnemius muscle than normal participants. During stop phase, the patients with Parkinson showed relatively lower average and peak iEMG in anterior tibialis and gastrocnemius muscle than normal participants.

• 한국항공운항학회지
• /
• 제18권4호
• /
• pp.67-72
• /
• 2010

In this study, performance analysis and design optimization is carried out for a multi-rate spring brake system, which is used in a cable ride to stop the arriving passengers in safe and comfortable manner. Mathematical model for the spring is developed toward the objective of minimizing the impact at the arrival while satisfying the constraint of limited distance at the stop. Matlab code is utilized to examine parameters affecting the performance of the brake system. The results are validated by a commercial software RecurDyn. Kriging meta model is used to reduce the computational cost of the analysis. Optimization is conducted by RecurDyn, from which the design parameters are determined that minimizes the impact at the stop.

• 정보관리학회지
• /
• 제35권2호
• /
• pp.7-36
• /
• 2018

본 연구는 기초학문자료센터가 인문자산 원스톱(One-Stop) 포털 서비스 구축에 있어 효과적인 데이터연계 방향성 제안을 목적으로 하였다. 이를 위해 인문자산을 보유한 국내 기관에 대한 현황을 수집하고 분석하였으며, 대상 기관이 보유한 데이터 분석을 통해 연계 방향성을 제시하였다. 본 연구에서는 첫째, 인문자산의 주제에 대하여 기존 분류체계 검토를 기반으로 인문자산의 분류체계를 제안하였다. 둘째, 조사 대상기관이 보유하고 있는 데이터의 주제와 유형에 대한 구체적인 분석을 통해 인문자산으로 편입될 수 있는 잠재적 데이터의 범주를 설정하였다. 셋째, 인문자산 원스톱 포털 서비스를 제공하고 있는 유사사례 기관의 플랫폼을 분석하였으며, 유사성을 중심으로 원스톱 시스템 구축 시, 적용 가능한 메타필드를 제시하였다.

• 한국지진공학회논문집
• /
• 제19권6호
• /
• pp.293-302
• /
• 2015

ASCE 4 requires that a hard stop be built around the seismic isolation system in nuclear power plants. In order to maintain the function of the isolation system, this hard stop is required to have clearance-to-stop, which should be no less than the 90th-percentile displacements for 150% Design Basis Earthquake (DBE) shaking. Huang et al. calculated clearance-to-stop by using a Latin Hypercube Sampling technique, without considering the rocking behavior of the isolated structure. This paper investigates the effects on estimation of clearance-to-stop due to 1) rocking behavior of the isolated structure and 2) sampling technique for considering the uncertainties of isolation system. This paper explains the simplified analysis model to consider the rocking behavior of the isolated structure, and the input earthquakes recorded at Diablo Canyon in the western United States. In order to more accurately approximate the distribution tail of the horizontal displacement in the isolated structure, a modified Latin Hypercube Sampling technique is proposed, and then this technique was applied to consider the uncertainty of the isolation system. Through the use of this technique, it was found that rocking behavior has no significant effect on horizontal displacement (and thus clearance-to-stop) of the isolated structure, and the modified Latin Hypercube Sampling technique more accurately approximates the distribution tail of the horizontal displacement than the existing Latin Hypercube Sampling technique.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 전자세라믹스 센서 및 박막재료 반도체재료 일렉트렛트 및 응용기술
• /
• pp.126-129
• /
• 2000

This paper describes on the fabrication of a SOI substrate by SDB technology and electrochemical etch-stop. The surface of the thinned SDB SOI substrate is more uniform than that of grinding or polishing by mechanical method, and this process was found to be very accurate method for SOI thickness control. During electrochemical etch-stop, leakage current versus voltage curves were measured for analysis of the open current potential (OCP) point, the passivation potential (PP) point and anodic passivation potential. The surface roughness and the controlled thickness selectivity of the fabricated a SDB SOI substrate were evaluated by using AFM and SEM, respectively.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.63-64
• /
• 2006

Here we present detailed simulation results of trench field stop IGBTs. Besides the reduced on-state voltage drop there is also an Increase of forward blocking voltage. A trench gate IGBT has low on-state voltage drop mainly due to the removal of the JFET region and a field stop IGBT has high forward blocking voltages due to the trapezoidal field distribution under blocking condition. We have simulated the static characteristics of TIGBT with field stop technology by 2D simulator(MEDICI). The simulated result of forward blocking voltage and on-state voltage drop is about 1,408V and 1.3V respectively at $110{\mu}m$ N-drift thickness.

• 한국전기전자재료학회논문지
• /
• 제25권4호
• /
• pp.261-265
• /
• 2012

IGBT(insulated gate bipolar transistor) is outstanding device for current conduction capabilities. IGBT design to control the large power switching device for power supply, converter, solar converter, electric home appliances, etc. like this IGBT device can be used in many places so to increase the efficiency of the various structures are coming. in this paper optimization design of planar type IGBT and planar field stop IGBT, and both devices have a comparative analysis and reflection of the electrical characteristics.

• 무역상무연구
• /
• 제20권
• /
• pp.181-212
• /
• 2003

Many seafood processing and export companies are scattered in Pusan area. Most of them has experienced hardships, because of physical distribution and sanitary costs, rent costs and Non-tariff barriers. GamCheon One-Stop Seafood Export Complex (GOSEC) is considered as the project which is necessary to establish GamCheon port as the seafood trade hub of Northeast Asia. GOSEC is to build the processing and export complex for seafood export. It applies to small and medium seafood export company. This paper aims to examine the economic benefit which could be derived from the construction of GOSEC. It reviews the quantifiable benefits of companies which wants to move into GOSEC. It also shows the results of questionnaire carried out to find the characteristics of potential GOSEC tenants.

• 한국입자에어로졸학회지
• /
• 제12권4호
• /
• pp.109-114
• /
• 2016

People in metropolitan cities can be exposed to particulate air pollutants at public transportation systems such as bus stops. In this study, we sampled aerosol particles with an impactor at a bus stop. We analyzed the shapes of these particles with an optical microscope. It was estimated that fibers, silicons, byproducts of combustion, and pollens existed in the air environments at the bus stop with analysis of shapes of sampled particles.

• 음성과학
• /
• 제10권4호
• /
• pp.81-91
• /
• 2003

The aim of this study was to estimate the target F2 values of the coronal plain stop in Korean and the degree of deviation from the target in the context of various vowels, and to compare the results of Korean regarding the coronal stop with those of English and French. An acoustic analysis showed that the mean F2 value of the Korean coronal stop produced by 10 male speakers was 1,855 Hz and the deviation from the target was 94 Hz in the context of [i], 204 Hz in the context of [u], and 407 Hz in the context of [o]. The target F2s of the coronal stop were the highest in English (1,929 Hz) and the lowest in French (1,662 Hz), and the deviation from the targets in the context of the high back vowel was the largest in French (257 Hz) and the smallest in English (73 Hz).