• Journal of the Korean Vacuum Society
• /
• v.11 no.3
• /
• pp.166-170
• /
• 2002

Artificial $BaTiO_3$(BTO)/$SrTiO_3$(STO) oxide superlattice have been deposited on MgO (100) single crystal substrate by pulsed laser deposition(PLD) method. The stacking periodicity of BTO/STO superlattice structure was varied from $BTO_{1\;unit\; cell}/STO_{1\;unit\; cell}$ to $BTO_{125\;unit\; cell}/STO_{125 \;unit \;cell}$ thickness with the total thickness of 100 nm. The result of X-ray diffraction showed the characteristics of superlattice in the BTO/STO multilayer structure. we have also confirmed that there was no interdiffusion at the interface between BTO and STO layers by high resolution transmission electron microscopy(HRTEM). The dielectric constant of superlattice increased with decreasing stacking periodicity of the BTO/STO superlattice within the critical thickness. The dielectric constant of the BTO/STO superlattice reached a maximum i.e., 1230 at a stacking perioicity of $BTO_{2\;unit\; cell}/STO_{2\;unit\; cell}$ .

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.5A
• /
• pp.441-449
• /
• 2011

Sample timing offset (STO) and carrier frequency offset (CFO) are caused by inter-symbol interference (ISI), inter-carrier interference (ICI) and phase error in orthogonal frequency division multiplexing (OFDM) system. OFDM characteristic is sensitive about STO and CFO. So when ICI occurs, compensation is hard and complex equalizer is needed. In this paper, we propose an effective correction method using feedback process with pilot and synchronization symbol. After feedback with estimated value in frequency domain, STO and CFO are corrected by control sample & and holder and oscillator. As a result of simulation, we confirm that STO and CFO can be corrected without equalizer through feedback.

• Knowledge Management Research
• /
• v.23 no.1
• /
• pp.27-46
• /
• 2022

The current era's focus is on the surge in real estate prices triggered by the global economic downturn. This study advocated STO-based dispersed investment for the MZ generation, who has less capital than earlier generations. Existing real estate investment methods were categorized into online, offline, and hybrid formats and the effectiveness of the suggested STO was given in this study through case analysis domestically and overseas. The entry of STO into the financial industry was positively proved, and the efficacy of blockchain technology was validated, through the investigation of the STO framework. The findings of this study are projected to revitalize the new real estate sector by actively supporting the access of the MZ generation into the current inflexible real estate investment market by the application of blockchain and reflecting MZ generation's investment propensity.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.11a
• /
• pp.56-56
• /
• 2003

BaTiO$_3$, SrTiO$_3$단일막과 BaTiO$_3$ (BTO)/SrTiO$_3$ (STO) 산화물 인공격자를 pulsed laser deposition (PLD) 법에 의해서 100 nm 두께의 (La,Sr)CoO3 (LSCO) 산화물 전극이 코핑된 MgO 단결정 기판 위에 증착시켰다. 이러한 기판위에서 2 unit cell의 적층 두께를 갖는 BTO/STO 초격자 (=BTO2/STO2)를 100～5 nm까지 변화시켰다. 또한 BTO와 STO 단일막도 같은 두께로 변화시켰다. 이러한 두께 범위에서 BTO, STO 단일막과 초격자의 격자변형에 따른 유전특성을 살펴 보았다. 두께 변화에 따른 단일막과 초격자의 구조 분석은 포항 방사광 가속기의 x-ray 회절에 의해서 이루어졌다. 다양한 두께를 갖는 BTO2/STO2 초격자에서 BTO와 STO 충은 in-plane 방향으로 격자정합을 유지하면서 변형되었다. 두께가 얇아지면서 하부 LSCO영향으로 BTO, STO의 n-plane 격자상수는 LSCO 격자상수 쪽으로 접근하였다. Out-of-plane 방향의 BTO 격자상수는 두께가 얇아지면서 증가하였고 반면에 STO 격자상수는 감소하였다. STO와 BTO 단일막의 격자변형은 두께가 얇아지면서 in-plane 방향으로 압축응력으로 인해 증가하였다. 그러나, 격자부정합도가 큰 BTO격자에서 더 많이 변형되었다. 또한 초격자에서 BTO격자가 BTO 단일막보다 더 많이 변형되었는데 초격자에서는 BTO, STO 두 층의 발달된 변형뿐만 아니라 하부 LSCO/MgO 기판의 영향을 함께 받고 있기 때문이다. 초격자와 단일막의 유전상수를 살펴보면은 두께가 감소하면서 유전상수가 감소하는 size effect을 보이고 있다. 하지만 초격자에서의 유전상수가 단일막보다 우수한 유전특성을 보이고 있다. 이러한 결과로 볼 때 격자변형이 size effect 영향을 끼치는 중요한 요소임을 확인하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.9C
• /
• pp.661-668
• /
• 2008

In this paper, a channel estimation technique based on pilot tones is proposed for cooperative SFBC-OFDM systems with a STO(Symbol Timing Offset). In a cooperative SFBC-OFDM system, the STO between RS(Relay Station) and MS(Mobile Station) varies depending on the location of MS. Since the STO causes distortion in the form of phase rotation, a channel estimation technique based on linear interpolation with respect to phase and amplitude is proposed for the case of orthogonal pilot allocation. Also, a channel estimation technique is proposed by solving nonlinear equation for the case of pilot structure with orthogonal code. It is shown by computer simulation that the performance of channel estimation can be significantly improved when the proposed techniques are applied to cooperative SFBC-OFDM systems with STO.

• Journal of Sensor Science and Technology
• /
• v.22 no.4
• /
• pp.244-248
• /
• 2013

The discovery of a two-dimensional electron gas (2DEG) in $LaAlO_3$ (LAO)/$SrTiO_3$ (STO) heterostructure has stimulated intense research activity. We suggest a new structure model based on $KNbO_3$ (KNO) material. The KNO thin films were grown on $TiO_2$-terminated STO substrates as a p-type structure ($NbO_2/KO/TiO_2$) to form a two-dimensional hole gas (2DHG). The STO thin films were grown on KNO/$TiO_2$-terminated STO substrates as an n-type structure to form a 2DEG. Oxygen pressure during the deposition of the KNO and STO thin films was changed so as to determine the effect of oxygen vacancies on 2DEGs. Our results showed conducting behavior in the n-type structure and insulating properties in the p-type structure. When both the KNO and STO thin films were deposited on a $TiO_2$-terminated STO substrate at a low oxygen pressure, the conductivity was found to be higher than that at higher oxygen pressures. Furthermore, the heterostructure formed at various oxygen pressures resulted in structures with different current values. An STO/KNO heterostructure was also grown on the STO substrate, without using the buffered oxide etchant (BOE) treatment, so as to confirm the effects of the polar catastrophe mechanism. An STO/KNO heterostructure grown on an STO substrate without BOE treatment did not exhibit conductivity. Therefore, we expect that the mechanics of 2DEGs in the STO/KNO heterostructures are governed by the oxygen vacancy mechanism and the polar catastrophe mechanism.

• Journal of Korea Port Economic Association
• /
• v.38 no.1
• /
• pp.31-47
• /
• 2022

While the ship finance industry has long been struggling with diminishing involvements from the private sector, government-run banks have consistently increased their presence in maritime finance. To address such concerns, this research conceptually explores the creation of blockchain technology-driven security token offering (STO) platforms. To suggest a sound platform model, this piece first examines key design principles. Based on the integral perspective on the digital platform, this paper exhibits three core design principles to create a virtuous platform ecosystem, then sets out STO platform design guidelines. This paper further explores an STO platform model by considering conventional ship finance systems and practices in Korea. The STO platform has three main effects; 1) the wider availability of STOs can enlarge both the scope and size of ship finance users, 2) the activation of security token transactions leads to an increase in participation, and 3) possibilities to create complementary innovative financial services can further encourage the participation of private investors. The STO ecosystem may contribute to the shipping, shipbuilding, and ship finance industries by enhancing its attractiveness to the general public and by creating positive externalities for Busan as a maritime finance center.

• Journal of the Korean Physical Society
• /
• v.73 no.10
• /
• pp.1566-1570
• /
• 2018

We investigated the visible emission property of $SrTiO_3$ (STO) single crystals irradiated with gammy-ray (${\gamma}$-ray) at various total doses up to 900 kGy. The electric and optical absorption properties of the irradiated STO samples were hardly changed with the ${\gamma}$-ray irradiation, compared with those of un-irradiated STO. In contrast, the visible emission near 550 nm increased with the ${\gamma}$-ray dose increasing. While the development of the visible emission was indicative of the increase of oxygen vacancies inside STO by the ${\gamma}$-ray irradiation, the newly generated oxygen vacancies were not significantly harmful to the electric and optical properties of STO. We concluded that the STO single crystal should have a good tolerance against the damage by the ${\gamma}$-ray irradiation.

• Progress in Superconductivity and Cryogenics
• /
• v.8 no.3
• /
• pp.27-31
• /
• 2006

We propose a replication method to solve the problem of large percent failure in texturing processes of coated conductors. This problem is due to the individual texturing process for each coated conductor that is very long tape having no single defect spot. We tested two different methods of replication process that are based on a well-textured Ni template. First method has structure of Ni/BaO/STO/$CeO_2$/SmBCO/Ag. So BaO layer is dissolved in water that we can separate STO/$CeO_2$/SmBCO/Ag layers. In this processing, the property of STO is conserved but the superconductivity of SmBCO is deteriorated. So we can consider another method. Second method has structure of template(STO)/BaO/STO/Pt/STO. After dissolving BaO then we deposited YBCO. The result of these experiments showed the feasibility of replication.

• The korean journal of orthodontics
• /
• v.38 no.3
• /
• pp.175-186
• /
• 2008

Objective: To evaluate the discrepancies between initial STO and final STO in Class III malocclusions and to find which factors are related to the discrepancies. Methods: Twenty patients were selected for the extraction group and 20 patients for the non-extraction group. They were diagnosed as skeletal Class III and received presurgical orthodontic treatment and mandibular set-back surgery at Pusan National University Hospital. The lateral cephalograms were analyzed for initial STO (T1s) at pretreatment and final STO (T2s) after presurgical orthodontic treatment, and specified the landmarks 3s coordinates of the X and V axes. Results: Differences in hard tissue points (T1s-T2s) in the X coordinates of upper central incisor edge, upper first molar mesial end surface, lower central incisor apex, lower first molar mesial end surface and mesio-buccal cusp and Y coordinates of upper central incisor edge, upper central incisor apex, upper first molar mesio-buccal cusp were statistically significant in the extraction group. Differences in hard tissue points (T1s-T2s) in the X coordinates of upper central incisor edge, lower central incisor apex, lower first molar mesial end surface and Y coordinates of lower central incisor apex were statistically significant in the non-extraction group. In the extraction group, the upper arch length discrepancy (UALD) had a statistically significant effect on maxillary incisor and first molar estimation. Lower arch length discrepancy and IMPA had statistically significant effects on mandibular incisor estimation in both groups. Conclusions: Discrepancies between initial STO and final STO and factors contributing to the accuracy of initial STO must be considered in treatment planning of Class III surgical patients to increase the accuracy of prediction.