• 한국기계가공학회지
• /
• 제17권1호
• /
• pp.34-41
• /
• 2018

A flange joint is a pipe connection used to prevent the leakage of high-pressure fluids by inserting a gasket and tightening the bolts. Among several kinds of gaskets available, metal ring type joint gaskets are most widely used in conditions that require high-temperature and high-pressure fluid flow, such as oil pipelines, gas pipes, pumps, valve joints, etc. The purpose of this study is to investigate the contact pressure and stress characteristics closely related to the sealing performance of Class 900 flange joints used in high temperature and high pressure environments. The dimensions of flange joints with five different nominal pipe sizes were determined with reference to those specified in ASME 16.5. The metal ring gaskets inserted in the joints were octagonal and oval gaskets. The bolt tensile forces calculated from the tightening torques were input as the bolt pretension loads in order to determine the contact pressure and stress levels after fastening. Loading was composed of three steps, including the fastening step, and different amounts of applied pressures were used in each analysis to investigate the effect of fluid pressure on the contact force of the joints. A general-purpose software, ANSYS 17.2, was used for the analysis.

• 한국재료학회지
• /
• 제22권11호
• /
• pp.587-590
• /
• 2012

Recently, the demand for the miniaturization of package substrates has been increasing. Technical innovation has occurred to move package substrate manufacturing steps into CMP applications. Electroplated copper filled trenches on the substrate need to be planarized for multi-level wires of less than $10{\mu}m$. This paper introduces a chemical mechanical planarization (CMP) process as a new package substrate manufacturing step. The purpose of this study is to investigate the effect of surfactant on the dishing and erosion of Cu patterns with the lines and spaces of around $10/10{\mu}m$ used for advanced package substrates. The use of a conventional Cu slurry without surfactant led to problems, including severe erosion of $0.58{\mu}m$ in Cu patterns smaller than $4/6{\mu}m$ and deep dishing of $4.2{\mu}m$ in Cu patterns larger than $14/16{\mu}m$. However, experimental results showed that the friction force during Cu CMP changed to lower value, and that dishing and erosion became smaller simultaneously as the surfactant concentration became higher. Finally, it was possible to realize more globally planarized Cu patterns with erosion ranges of $0.22{\mu}m$ to $0.35{\mu}m$ and dishing ranges of $0.37{\mu}m$ to $0.69{\mu}m$ by using 3 wt% concentration of surfactant.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2004년도 학술대회지
• /
• pp.68-72
• /
• 2004

A practical method to investigate the user interface of web based Flexible Manufacturing System(FMS) on the internet environment is established. Because the industrial FMS controller requires a lot of gadget, such as switch, dial, button, etc., for actual work-site flexible operation sufficiently, the user interface of the controller is significantly complex. The support for operational convenience of FMS controller can increase productivity and efficiency of the user, operational personnel of FMS. While most FMS provide their application programming interface(API) and graphical user interface(GUI) with adequate mechanism itself when used in stand alone, there is increasing demand for FMS that can operate with the intuitional user interface find virtual reality(V/R) environment. This thesis considers the intuitional user interface of Web-based FMS first, and from this, goes a step further, improves as virtual reality environment of FMS on the internet environments by using the feature based modeling technique approach and cartoon rendering. The feature-based modeling technique approach is applied to FMS line which is consist of facilities such as machining center, CNC lathe, autonomous guided vehicle, rail guided vehicle, and various controllers. In this study, the FMS established the intuitional user interface is able to obtain not only the operational convenience but also the enough productivity and significant efficiency.

• 한국생산제조학회지
• /
• 제25권2호
• /
• pp.124-131
• /
• 2016

Several research works for finding and optimizing the methods of dispensing high viscosity phosphor used in the fabrication of white LED's are currently in progress. High viscosity phosphor dispensing with a high accuracy is crucial because the dispensing rate and uniformity directly affect parameters such as the CIE chromaticity diagram, color temperature and luminous flux of white LED's. This study presents a novel method of dispensing high viscosity phosphor using electrohydrodynamic printing. The dispensing rate was optimized less than 0.01 mg phosphor using experiments and optimizing the process parameters including the standoff distance from the nozzle to the substrate, ink supply pressure, and multi-step pulsed waveform magnitude ratio. The dispensing rate was measured by dispensing 20 dots using drop-on-demand with the optimized parameters, and the experiments were repeated 10 times to maximize the data accuracy. The average dispensing rate that can be reliably used for high viscosity phosphor dispensing was 0.0052 mg.

• 산업진흥연구
• /
• 제2권2호
• /
• pp.23-29
• /
• 2017

본 연구는 제조업의 위기탈출을 위한 새로운 방법을 제시하고자 현장 중심적 경영혁신 추진 내용을 정성적 성과와 정량적 성과로 나누어 살펴보았다. 현장 중심적 경영혁신은 관리자 중심의 관리방식에서 현장관리사원 중심의 관리 방식으로 전환하여 현장관리 사원이 당면한 문제점을 신속히 해결해가도록 도와주고 지원해 주는 조직으로 현장경영 교육을 통해서 일과 일이 아닌 것을 구분, 자신이 하고 있는 일의 낭비요인을 찾아 개선하고 고객의 요구에 맞추어 공정기준을 설정한다. 현장관리사원은 작업을 하기 전에 내가 할 일의 공정기준을 정확히 숙지하고, 사용할 원자재의 규격이 일치하는지 자주 검사를 실시하고, 자주 검사를 실시 후 규격을 검토하여 이상이 없으면 다음 공정에 인계해 주는 방법으로 교차 검증을 실시한다. 본 연구결과를 통해 제조기업의 경쟁력 제고를 위해 유용하게 활용될 수 있다. 급변하는 국제적 경영환경 변화에 적응하기 위해 새로운 경영혁신 기법이 요구되는 바, 본 연구가 이를 위한 또 하나의 시사점을 제공한 데 그 의의가 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.362-365
• /
• 2005

Currently Chemical Mechanical Planarization (CMP) has become an essential step in the overall semiconductor wafer fabrication technology. Especially the CMP pad conditioner, one of the diamond tools, is required to have strong diamond retention. Strong cohesion between diamond grits and metal matrix prevents macro scratch on the wafer. If diamond retention is weak, the diamond will be pulled out of metal matrix. The pulled diamond grits are causative of macro scratch on wafer during CMP process. Firstly, some results will be reported of cohesion between diamond grits and metal matrix on the diamond tools prepared by three different manufacturing methods. A measuring instrument with sharp cemented carbide connected with a push-pull gauge was manufactured to measure the cohesion between diamond grits and metal matrix. The retention force of brazed diamond tool was stronger than the others. The retention force was also increased in proportion to the contact area of diamond grits and metal matrix. The brazed diamond tool has a strong chemical combination of the interlayer composed of chrome in metal matrix and carbon which enhance the interfacial cohesion strength between diamond grits and metal matrix. Secondly, we measured real-time data of the coefficient of friction and the pad wear rate by using CMP tester (CETR, CP-4). CMP pad conditioner samples were manufactured by brazed, electro-plated and sintered methods. The coefficient of friction and the pad wear rate were shown differently according to the arranged diamond patterns. Consequently, the coefficient of friction is increased according as the space between diamonds is increased or the concentration of diamonds is decreased. The pad wear rate is increased according as the degree of diamond protrusion is increased.

• 한국기계가공학회지
• /
• 제20권12호
• /
• pp.113-122
• /
• 2021

Complicated residual stress distributions occur in the vicinity of a deposited region via directed energy deposition (DED) process owing to the rapid heating and cooling cycle of the deposited region and the substrate. The residual stress can cause defects and premature failure in the vicinity of the deposited region. Several heat treatment technologies have been extensively researched and applied on the part deposited by the DED process to relieve the residual stress. The aim of this study was to investigate the residual stress characteristics of a specimen fabricated by DED and a quenching process using thermomechanical analyses. A coupled thermomechanical analysis technique was adopted to predict the residual stress distribution in the vicinity of the deposited region subsequent to the quenching step. The results of the finite element (FE) analyses for the deposition and the cooling measures show that the residual stress in the vicinity of the deposited region significantly increases after the completion of the elastic recovery. The results of the FE analyses for the heating and quenching stages further indicate that the residual stress in the vicinity of the deposited region remarkably increases at the initial stage of quenching. In addition, it is observed that the residual stress for quenching is lesser than that after the elastic recovery, irrespective of the deposited material.

• 한국기계가공학회지
• /
• 제18권4호
• /
• pp.16-25
• /
• 2019

Recently, due to labor shortages in rural areas within South Korea, the demand for upland-field machinery is growing. In addition, there is a lack of development of systematic performance testing of upland-field machinery. Thus, this study examined structural safety and drawbar pull based on soil properties, as a first step for systematic performance testing on the test bed. First, the properties of soil samples from 10 spots within the experimental site were examined. Second, the strain was measured and converted into stress on 8 points of an onion harvester that are likely to fail. More specifically, the chosen parts are linked to the power, along with the drawbar pull, using a 6-component load cell equipped between the tractor and the onion harvester. The water content of the soil ranged between 5.7%-7.5%, and the strength between 250-1171 kPa. The test soil was subsequently classified into loam soil based on the size distribution ratio of the sieved soil. The onion harvester can be considered as structurally safe based on the derived safety factor and the drawbar pull of 115-1194 kgf, according to the working speed based on agricultural fieldwork.

• 한국기계가공학회지
• /
• 제18권3호
• /
• pp.14-25
• /
• 2019

From 2019 onwards, more stringent regulations (from Stage 4 to Stage 5) are to be implemented in Europe in order to reduce the air pollutant emissions. In South Korea, the government authorities started to make new regulation to meet the European regulation. As a first step, the air pollutant emissions such as CO, NOx, SOx, TSP, $PM_{10}$, $PM_{2.5}$, VOC, $NH_3$ by agricultural machinery were analyzed based on CAPSS inventory along with the analysis in the general aspect in this study. Three levels of analysis was conducted each in agricultural machinery aspect along with in the general aspect. Per agricultural tractor, all kinds of the air pollutant emissions decreased by 25, 25, 99, 25, 25, 25, 25% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014. Per combine harvester, all kinds of the air pollutant emissions decreased by 63, 63, 91, 63, 63, 63, 63% for the CO, NOx, SOx, TSP, $PM_{10}$, VOC, $NH_3$ emissions each from the year 2000 to the year 2014.

• 한국기계가공학회지
• /
• 제20권2호
• /
• pp.8-13
• /
• 2021

The study for soil has been conducted separately by several areas such as soil mechanics and soil chemistry. Soil is important in terms of prediction of how the plant grow with nutrient requirement. Also, soil is important for machines to work on to solve labor shortage and save farmers from harsh environment during farm work. To meet diverse needs related to soil in agriculture, the soil related study needs to be conducted synthetically. Thus, we tried to obtain the data related to soil chemistry including pH and Electrical Conductivity (EC) with data related to soil mechanics including Cone Index (CI), moisture content, soil classification. Specifically, the condition of the field was set to be cultivated at least for five years continuously at a first step. The soil was taken from 30 sites. CI was obtained using the soil penetrometer and soil classification was conducted using sieve analysis with eight kinds of sieve. The soil was taken on December when is during winter in Korea. There was variation of data including moisture content and CI.