• 한국미생물·생명공학회지
• /
• 제20권4호
• /
• pp.437-444
• /
• 1992

분쇄마찰매체함유 불균일상 효소반응계를 활용한 생전분의 무증자당화법은 고농도, 고순도의 포도당을 고효율로 직접 얻을 수 있는 새로운 당화법으로 이를 high fructose corn syrup(HFCS) 제조공정에 응용코져 연구하였다. 400g/$\ell$ 생전분을 24시간 무증자당화시켜 이성화반응에 적합한 고농도인 398g/$\ell$와 고순조인 98 포도당 용액을 농축과정을 거치지 않고 직접 얻을 수 있었다. 전분에 대한 포도당수율은 0.90으로, 미반응 잔유전분은 쉽게 원심분리되었으며, 재당화도 용이하였다. 또한 무증자당화액은 단백질성 변성물, 이온 등 불순물의 함량이 매우 적어, 이성화 반응 전단계인 분리 정제과정을 단순화할 수 있었다. 생성된 당용액의 고정화 포도당 이성화효소 기질로서의 적합성을 검토하여 우수한 결과를 얻었다. 생전분 직접당화법을 도입한 새로운 HFCS 제조공정은 액화/당화공정을 경유하는 기존의 공정에 비하여 여러가지 장점이 있어 산업적 활용이 기대되며, 이를 위한 후속연구가 요망된다.

• Safety and Health at Work
• /
• 제3권4호
• /
• pp.278-286
• /
• 2012

Objectives: Authors investigated the pattern of the rate of occupational injuries and illnesses (ROII) at the level of enterprises in order to build a network for exchange of experience and knowledge, which would contribute to workers' safety and health through safety climate of workplace. Methods: Occupational accidents were analyzed at the manufacturing work site unit. A two step clustering process for the past patterns regarding the ROII from 2001 to 2009 was investigated. The ROII patterns were categorized based on regression analysis and the patterns were further divided according to the subtle changes with Mahalanobis distance and Ward's linkage. Results: The first clustering of ROII through regression analysis showed 5 different functions; 29 work sites of the linear function, 50 sites of the quadratic function, 95 sites of the logarithm function, 62 sites of the exponential function, and 54 sites of the sine function. Fourteen clusters were created in the second clustering. There were 3 clusters in each function categorized in the first clustering except for sine function. Each cluster consisted of the work sites with similar ROII patterns, which had unique characteristics. Conclusion: The five different patterns of ROII suggest that tailored management activities should be applied to every work site. Based on these differences, the authors selected exemplary work sites and built a network to help the work sites to share information on safety climate and accident prevention measures. The causes of different patterns of ROII, building network and evaluation of this management model should be evaluated as future researches.

• Journal of Computational Design and Engineering
• /
• 제2권3호
• /
• pp.157-164
• /
• 2015

This paper discusses an optimization-based approach for the design of a product platform for industrial three-axis linear-type robots, which are widely used for handling objects in manufacturing lines. Since the operational specifications of these robots, such as operation speed, working distance and orientation, weight and shape of loads, etc., will vary for different applications, robotic system vendors must provide various types of robots efficiently and effectively to meet a range of market needs. A promising step toward this goal is the concept of a product platform, in which several key elements are commonly used across a series of products, which can then be customized for individual requirements. However the design of a product platform is more complicated than that of each product, due to the need to optimize the design across many products. This paper proposes an optimization-based fundamental framework toward the design of a product platform for industrial three-axis linear-type robots; this framework allows the solution of a complicated design problem and builds an optimal design method of fundamental features of robot frames that are commonly used for a wide range of robots. In this formulation, some key performance metrics of the robot are estimated by a reducedorder model which is configured with beam theory. A multi-objective optimization problem is formulated to represent the trade-offs among key design parameters using a weighted-sum form for a single product. This formulation is integrated into a mini-max type optimization problem across a series of robots as an optimal design formulation for the product platform. Some case studies of optimal platform design for industrial three-axis linear-type robots are presented to demonstrate the applications of a genetic algorithm to such mathematical models.

• Nuclear Engineering and Technology
• /
• 제49권8호
• /
• pp.1711-1716
• /
• 2017

Uranium tetrafluoride ($UF_4$) is the most used nuclear material for producing metallic uranium by reduction with Ca or Mg. Metallic uranium is a raw material for the manufacture of uranium silicide, $U_3Si_2$, which is the most suitable uranium compound for use as nuclear fuel for research reactors. By contrast, ammonium uranyl carbonate is a traditional uranium compound used for manufacturing uranium dioxide $UO_2$ fuel for nuclear power reactors or $U_3O_8-Al$ dispersion fuel for nuclear research reactors. This work describes a procedure for recovering uranium and ammonium fluoride ($NH_4F$) from a liquid residue generated during the production routine of ammonium uranyl carbonate, ending with $UF_4$ as a final product. The residue, consisting of a solution containing high concentrations of ammonium ($NH_4^+$), fluoride ($F^-$), and carbonate ($CO_3^{2-}$), has significant concentrations of uranium as $UO_2^{2+}$. From this residue, the proposed procedure consists of precipitating ammonium peroxide fluorouranate (APOFU) and $NH_4F$, while recovering the major part of uranium. Further, the remaining solution is concentrated by heating, and ammonium bifluoride ($NH_4HF_2$) is precipitated. As a final step, $NH_4HF_2$ is added to $UO_2$, inducing fluoridation and decomposition, resulting in $UF_4$ with adequate properties for metallic uranium manufacture.

• Journal of Welding and Joining
• /
• 제34권2호
• /
• pp.59-66
• /
• 2016

The Gas Metal Arc(GMA) welding, called Metal Inert Gas(MIG) welding, has been an important component in manufacturing industries. A key technology for robotic welding processes is seam tracking system, which is critical to improve the welding quality and welding capacities. The objectives of this study were to develop the intelligent and cost-effective algorithms for image processing in GMA welding which based on the laser vision sensor. Welding images were captured from the CCD camera and then processed by the proposed algorithm to track the weld joint location. The proposed algorithms that commonly used at the present stage were verified and compared to obtain the optimal one for each step in image processing. Finally, validity of the proposed algorithms was examined by using weld seam images obtained with different welding environments for image processing. The results proved that the proposed algorithm was quite excellent in getting rid of the variable noises to extract the feature points and centerline for seam tracking in GMA welding and could be employed for general industrial application.

• Current Photovoltaic Research
• /
• 제2권3호
• /
• pp.115-119
• /
• 2014

$Cu(In,Ga)Se_2$ (CIGS) thin films have been used as a light absorbing layer in high-efficiency solar cells. In order to improve the quality of the CIGS thin film, often selenization step is applied. Especially when the thin film was formed by non-vacuum powder process, selenization can help to induce grain growth of powder and densification of the thin film. However, selenization is not trivial. It requires either the use of toxic gas, $H_2Se$, or expensive equipment which raises the overall manufacturing cost. Herein, we would like to deliver a new, simple method for selenization. In this method, instead of using a costly two-zone furnace, use of a regular tube furnace is required and selenium is supplied by a mixture of selenium and ceramic powder such as alumina. By adjusting the ratio of selenium vs. alumina powder, selenium vaporization can be carefully controlled. Under the optimized condition, steady supply of selenium vapor was possible which was evidently shown by large grain growth of CIGS within a thin powder layer.

• 한국정보시스템학회지:정보시스템연구
• /
• 제29권1호
• /
• pp.137-158
• /
• 2020

Purpose This study aims to analyze how entrepreneurs' morality affects entrepreneurship and social responsibility. The purpose of this study is to analyze the differences of entrepreneurship and social responsibility on corporate financial performance and social performance by measuring entrepreneurial morality index. Design/methodology/approach The research model is based on the existing literature related to morality, entrepreneurship, social responsibility, and corporate performance. In order to verify the research model, empirical analysis was conducted. The collected data were analyzed by Smart-pls 2.0 based on the structural equation model based measurement model verification and the structural model verification two - step approach. Using the bootstrapping method of PLS, 500 samples were constructed and hypothesis verification was performed. Findings The results of this study are as follows. In the case of general manufacturing companies, business people are more focused on improving corporate performance than morality, and have a somewhat consistent effect with entrepreneurial spirit that does not have a space of morality. When entrepreneurship is strengthened, financial performance and social performance. Business entrepreneurs in social enterprises are more aware of social responsibility than entrepreneurship, so they achieve both financial performance and social performance at the same time. As a result of this study, it was found that there is a difference in perception depending on the morality of the business people, entrepreneurship, social bookkeeping, and management performance according to the type of company.

• 대한인간공학회지
• /
• 제29권6호
• /
• pp.933-942
• /
• 2010

Objective: To develop an ergonomic evaluation tool which can be apply to assess the lower-limb postures associated with farming tasks. Background: In general, most of existing ergonomic assessment tools was developed to investigate the work-related musculoskeletal disorders of the upper-limb postures in manufacturing industry. Methods: As the first step of development of the evaluation tool, 13 lower-limb postures that were commonly observed in farming task were investigated by the subjective discomfort ratings, heart rates, and muscle activities. And then, an ergonomic evaluation tool for the lower-limb postures was developed based on results of the first experiment. Lastly, the ergonomic checklist which was developed in the current study was compared with other existing ergonomic assessment tools. Results: Based on the results of comparisons between a newly developed assessment tool and other existing assessment tools, it was found that a newly developed tool can perceive more sensitively for the various lower-limb postures than other assessment tools. Conclusions: Lower-limb posture assessment tool which can evaluate and assess risks of lower-limb WMSDs which were prevalent in farming tasks more easily and accurately was developed in this study. The lower-limb assessment tool can also be utilized to prevent WMSDs related with lower-limbs as well as improve working environments.

• 벤처창업연구
• /
• 제3권3호
• /
• pp.17-65
• /
• 2008

2002년 제조물책임법이 시행된 이후 정부에서는 종합시책을 확정하고, 업종별 PL센터를 설립하여 소비자 상담과 분쟁에 적극 대응하고 있다. 그러나 아직 많은 기업들이 제품고유의 안전성 확보를 위한 철학과 기술을 가지고 있지 못하여 제조물책임법에 대한 대응체계가 미흡한 것이 사실이다. 본 연구의 목적은 제조물책임 관련 안전사고와 리콜실태, 소비자 위해실태, Pl보험사고 소송사례 등을 실증적 사례중심으로 검토.분석하여 이를 토대로 제조물 책임이 기업 가치에 어떠한 영향을 미치는지 상호관계를 연구하고, 기업의 제조물책임 대응전략을 제시하는데 그 의미가 있다.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2003년도 추계학술대회 논문집(III)
• /
• pp.322-326
• /
• 2003

Dae-gu subway accident raise whole points in connection with safety facilities and operating of national urban transit system like rolling stocks, facilities, management of human. Rolling stock is made every effort for improvement of performance, guarantee of comfortableness, insurance of economical efficiency. But Security like safety of fire is not thoroughgoing enough. Especially, interior material has used although it is not prove its degree of safety. it is a main cause of Dae-gu subway accident. Safety regulation of urban transit vehicle that legislate for security in March 2000 does not applied manufacturing vehicles before in 2000. It has be prescribed in the regulations that incombustibles must be used. But detailed test standard related with incombustibles is not prescribe. Thus that regulation be required reinforcement of detailed test standard. Main cause of Dae-Gu subway accident is a fire in vehicle. However, many defects are found in infrastructure and operating vehicle of urban transit, such as inexperienced disposal of driver and CCC in early stage of the fire accident, unskilled opening and closing doors, insufficient escape facilities and safety facilities of a station house and tunnel, and incomplete communication system between vehicle and CTC, extraordinary step. Thus the aims of this study are prevention of urban transit accident, improvement plan of safety driving, and proposal of quick action plan through analysis of total faculty of vehicle.