• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.1
• /
• pp.15-24
• /
• 2008

The data delivery confirmation method of MIL-STD-188-220C, which is a tactical wireless mobile Ad-Hoc communication protocol, is that a source node requires the end-to-end ack from all destination nodes and the data-link ack from 1-hop neighboring destination nodes and relaying nodes, regardless of the hop distance from a source node to destination nodes. This method has the problem to degrade the whole communication network performance because of excessive data traffic due to the duplicate use of end-to-end ack and data-link ack, and the collision among end-to-end acks on the wireless network in the case of confirming a data delivery within an 1-hop distance. In order to solve this problem, this paper has proposed the method to perform the data delivery confirmation with the improvement of communication network performance through the data traffic reduction by achieving the reliable data delivery confirmation requiring the only data-link ack within an 1-hop distance. The effects of the proposed method are analyzed in the two aspects of the data delivery confirmation delay time and the data delivery confirmation success ratio.

• Journal of the Korean Society for Precision Engineering
• /
• v.29 no.4
• /
• pp.395-408
• /
• 2012

An experimental investigation with 2.8kW Nd:YAG laser system was carried out to study the effects of different laser process parameters on the microstructure and hardness of STD11. The optical lens with the elliptical profile are designed to obtain a wide surface hardening area with uniform hardness. The Laser beam is allowed to scan on the surface of the work piece varying the power (1600, 1800 and 1900kW) and traverse speed (200, 400, 600, 800 and 1000mm/min) at three different F-numbers of lens. After laser surface treatment three zones, In the microstructure have been observed : melted zone(decarburization), heat affected zone(martensite), and the substrate.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.245-251
• /
• 2004

This paper is studied on the effect of TiAlN coated Ball End Mill and MQL(Minimum Quantity Lubrication) cutting condition on cutting characteristic of high hardness steels. KP4 steels[HRC32] and STD11[HRC60] heat treated steels were used as the workpiece and WC-Co ball end mill and single and multi layer TiAlN coated ball end mill were utilized in the cutting tests. MQL device was used to spray botanical oil coolant. Result showed that TiAlN coated ball end mill were increased the cutting length than WC-Co ball end mill in the cutting speed[$245{\sim}320m/min$] about $2.3{\sim}5.7$ times for KP4 steels and about $2.5{\sim}4.3$ times far STD11 heat treated steels. The multi layer TiAlN coated ball end mill is good for KP4 steels than single layer coated.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.10
• /
• pp.130-137
• /
• 1995

With the rapid growth of the die and mold, the new die making method has been developed. Especially, the laser is very useful, because it has a very fast cutting speed and is possible to manufacture complicated geometry. The quality of the laser cut is to be evaluated with respect to some characteristic quality parameters such as kerf width geometry, roughness and heat affected zone. This paper describes the laser cut characteristic(heat-affected zone) of the alloy tool steels(STD11) and the prediction of the kerf width genmetry by the FEM. On using the oxidation heat and laser beam, the prediction of kerf geometry is more accurate than that only by the laser beam. After laser cutting, the heat-affected zone is generated on the cutting cross section. The magnitude of hardness on the cutting cross section was similar to that of the heat treatment. It was possible to predict heat-affected zone by using the FEM program.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.2
• /
• pp.374-384
• /
• 2007

In this paper, we propose and observe a system that adopts Independent-MCS (Modulation and Coding Scheme) level for each layer in the combined AMC-V-BLAST (Adaptive Modulation and Coding-Vertical-Bell-lab Layered Space-Time) system. In addition, we consider the throughput performance of combined AMC-V-BLAST system using STD (Selection Transmit Diversity) and Independent-MCS level. Also, comparing with the combined system using Common-MCS level, we observe throughput performance improvement. As a result of simulation Independent-MCS level case adapts modulation and coding scheme for maximum throughput to each channel condition in separate layer, resulting in improved throughput compared to Common-MCS level case. Especially, the results show that the combined AMC-V-BLAST system with Independent-MCS level achieves a gain of 700kbps in $7{\sim}9dB$ SNR (Signal-to-Noise Ratio) range and the combined AMC-V-BLAST system with STD and Independent-MCS level achieves a gain of 350kbps in the same SNR range.

• Nuclear Engineering and Technology
• /
• v.55 no.3
• /
• pp.870-875
• /
• 2023

In this paper, we analyzed the revised guidance on electromagnetic (EM) interference qualification of Regulatory Guide 1.180 (Revision 2), which is published by the U.S. Nuclear Regulatory Commission for electromagnetic compatibility qualification for nuclear safety, by comparing it with that of the previous version. We confirmed that the test methods and the acceptance criteria of both CE101 and CE102 tests for conductive emission and RE102 test for radiating emission are changed in the recently revised Regulatory Guide 1.180 (Revision 2). Furthermore, we found that the revised Regulatory Guide 1.180 provides flexibility in the use of alternative methods for EM interference (EMI) qualification, in that a mix of the various base-standards is technically allowed. In addition, the primary revision of the updated Regulatory. Guide 1.180 is that MIL-STD-461G is to be adopted as the latest base-standard, instead of MIL-STD-461E. To evaluate the influence on EMI qualification for nuclear safety due to the endorsement of MIL-STD-461G, we thoroughly analyzed the modifications in the acceptance criteria and test methods for EMI qualification, and then validated the analyzed effect on the EMI qualification, which is caused by the revision of MIL-STD-461, by performing electromagnetic simulation for equipment under RE102 test.

• Journal of the Korean Society for Precision Engineering
• /
• v.20 no.11
• /
• pp.47-54
• /
• 2003

Research during the past several years has established the effectiveness of acoustic emission (AE)-based sensing methodologies for machine condition analysis and process. AE has been proposed and evaluated for a variety of sensing tasks as well as for use as a technique for quantitative studies of manufacturing process. STD11 has been known as difficult-to-cut materials. The micro-grooving machine was developed for this study and the experiments were performed using CBN blade for machining STD11. Evaluating the machining conditions, frequency spectrum analysis of acoustic emission (AE) signals according to each conditions were applied. Fuzzy clustering method for associating the preprocessor outputs with the appropriate decisions was followed by frequency spectrum analysis. FFT is used to decompose AE signal into different frequency bands in time domain, the root mean square (RMS) values extracted from the decomposed signal of each frequency band were used as features.

• Journal of the Korea Computer Industry Society
• /
• v.2 no.11
• /
• pp.1477-1482
• /
• 2001

In this paper, we examined receiving parameters of receiver and also analyzed them through simulation based on J-STD-018, which is the minimum specification of PCS mobile station. Receiving system was made a passive double balance mixer which has low gain and high IIP3, and an intermediate frequency amplifier for enhancing the low gain. The result of simulating receiving parameter is as follows: noise figure which is the parameter of specification of the receiving sensitivity is 6.746dB, IIP3 which is the parameter of specification of the intermodulation spurious response attenuation is -11.358dBm.

• Journal of the Korean Society for Precision Engineering
• /
• v.11 no.5
• /
• pp.153-160
• /
• 1994

In this study, residual stress and surface roughness were investigated experimentally to evaluate surface integrity on surface layer machined by CBN, ceramics and WC cutting tools. When machining difficult-to-cut material (hardened STD11 steel $H_{R}$C 60), residual stresses remaining in machined surface layer were mainly compressive. The increase of flank wear caused a shift of the compressive residual stress maximum to greater workpiece depths, but the changes did not penetrate the workpiece beneath a depth of 300 .mu. m. Surface roughness was influenced considerably by variations of the cutting speed and feed. In machining hard material, CBN and A1$_{2}$ $O_{3}$ ceramics cutting tool materials proved significantly superior to mixed ceramics A1$_{2}$ $O_{3}$-TiC and WC in evaluation of surface integrity.y.

• 한국해양학회지
• /
• v.4 no.2
• /
• pp.83-86
• /
• 1969

해양관측의 세계적인 공통성으로 해서 염분검정법이 이미 오래 전부터 통일화 되었지만 근래에 와서는 용존산소량 정량법도 국제적인 Intercalibration을 하는 등규격화에의 기운이 나고 있다. 다시 Kuroshio 합동조사에서는 영양염의 정량에 있어 공통된 표준용액을 사용하므로써 조작상의 편리와 측정치의 신뢰성을 더욱 향상시키자는 의도에서 일본이 국제적인 영양염 표준용액의 조제 및 배포에 관한 안을 내어 1965년 Manila 회의를 거쳐 일본 상모중앙화학연구소의 관원씨가 이를 맡아 1966년부터 시작하여 1967년까지에 요오드산칼리움, 아질산염, 인산염, 규산염의 표준용액을 만들어 1968년 봄부터 시험적으로 일본국내와 동남아 수개국에 나누어 사용해 왔던 것이다. 다시 1968년 9월의 SCOR 의 영양염에 관한 Working Group 회의에서 CSK Std. Solution을 사용하여 세계각국에서 현재 사용하고 있는 영양염 분석방법의 Intercalibration을 하자는 회의가 있었고, 이것을 권고사항으로 SCOR에 보고하여 1968년 11월에 ICES가 승인하므로써 Intercalibration에 관한 원칙이 정해졌다. 동시에 Finland의 Koroleff씨와 Palmork씨가 organizer로 정해졌던 것이다. 이 보다 약간 앞서 본인이 상모중연에 가 있을 때 Std. Solution으로서 아질산염용액 만으로 각종무기질소화합물의 표준용액으로 대용한다는 것은 비합리적이므로 질산염과 암모늄염의 표준용액이 있어야 한다고 주장하여 우선 질산염용액을 추가로 만들기로 하여 1968년 11월부터 표준물질의 정제부터 시작 되었다. 1969년 1월에 Intercalibration 에 관한 구체적인 회의를 위해 Scripps 해양연구소에 관원, Wooster Rakestraw, Cieskes씨등이 모여 우선 일본상모중연에서 만들고 있는 인산염, 질산염, 아질산염, 규산염의 CSK 표준용액을 표준시료로하여 SCOR 과 ICES의 해양화학분과에서 선정한 세계 100개처에 나누어 현재 각자가 사용하고 있는 방법의 정밀도와 정확도를 check하는 소위 International intercalibration을 1969년 9월부터 시작하기로 확정을 보았고, 동시에 구체적인 지시가 있었던 것이다. 이시료를 받는 사람에게는 다만 그것의 농도범위만 알려주고 정확한 농도는 Koreleff와 관원씨만이 알고 있기로 하여 측정에 분석자의 주관이 개입되지 못하도록 했고, 분석치는 SCOR가 모아 해석하되 번호제로 하여 어떤 나라의 누구가 했다는 것은 밝히지 않기로 되어 있다. 이같은 내력으로 CSK Std. Solution이 국제적인 Intercalibration용의 표준시료로서 시험적으로 사용되기 까지는 되었으나, CSK Std. Solution 그자체에 관해서는 아직도 해결해야 할 점, 개량을 요하는 점이 많다. 이하에서는 주로 개량을 요하는 점에 관해 몇가지 언급하고자 한다.