• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.11 no.5
• /
• pp.3-16
• /
• 2001

With the development of Internet, it is widely spreaded to a Intranet based on Internet technology. Intranet is a private, unique network to share the information of organization such as incorporate, research institute and university. With the increase of Intranet using, Intranet environment is developing into Extranet environment which is connected many Intranet. Currently such Intranet and Extranet environments, above all, it is important to solve security problems which can appear through use of information between domains. Thus, in this paper, we propose SSO(Single Sign-on System) model with authorization management and single sign-on operation, and we extend it to enable mutual authentication through inter-working based on PKI(Public Key Infrastructure) in Extranet environments.

• Journal of The Korean Astronomical Society
• /
• v.54 no.1
• /
• pp.9-16
• /
• 2021

The Ozone Dynamics Investigation Nano-Satellite (ODIN) is a CubeSat design proposed by Chungnam National University as contribution to the CubeSat Competition 2019 sponsored by the Korean Aerospace Research Institute (KARI). The main objectives of ODIN are (1) to observe the polar ozone column density (latitude range of 60° to 80° in both hemispheres) and (2) to investigate the chemical dynamics between stratospheric ozone and ozone depleting substances (ODSs) through spectroscopy of the terrestrial atmosphere. For the operation of ODIN, a highly efficient power system designed for the specific orbit is required. We present the conceptual structural design of ODIN and an analysis of power generation in a sun synchronous orbit (SSO) using two different configurations of 3U solar panels (a deployed model and a non-deployed model). The deployed solar panel model generates 189.7 W through one day which consists of 14 orbit cycles, while the non-deployed solar panel model generates 152.6 W. Both models generate enough power for ODIN and the calculation suggests that the deployed solar panel model can generate slightly more power than the non-deployed solar panel model in a single orbit cycle. We eventually selected the non-deployed solar panel model for our design because of its robustness against vibration during the launch sequence and the capability of stable power generation through a whole day cycle.

• Geomechanics and Engineering
• /
• v.36 no.3
• /
• pp.259-276
• /
• 2024

The undrained shear strength is widely acknowledged as a fundamental mechanical property of soil and is considered a critical engineering parameter. In recent years, researchers have employed various methodologies to evaluate the shear strength of soil under undrained conditions. These methods encompass both numerical analyses and empirical techniques, such as the cone penetration test (CPT), to gain insights into the properties and behavior of soil. However, several of these methods rely on correlation assumptions, which can lead to inconsistent accuracy and precision. The study involved the development of innovative methods using extreme gradient boosting (XGB) to predict the pile set-up component "A" based on two distinct data sets. The first data set includes average modified cone point bearing capacity (q_t), average wall friction (f_s), and effective vertical stress (σ_vo), while the second data set comprises plasticity index (PI), soil undrained shear cohesion (S_u), and the over consolidation ratio (OCR). These data sets were utilized to develop XGBoost-based methods for predicting the pile set-up component "A". To optimize the internal hyperparameters of the XGBoost model, four optimization algorithms were employed: Particle Swarm Optimization (PSO), Social Spider Optimization (SSO), Arithmetic Optimization Algorithm (AOA), and Sine Cosine Optimization Algorithm (SCOA). The results from the first data set indicate that the XGBoost model optimized using the Arithmetic Optimization Algorithm (XGB - AOA) achieved the highest accuracy, with R2 values of 0.9962 for the training part and 0.9807 for the testing part. The performance of the developed models was further evaluated using the RMSE, MAE, and VAF indices. The results revealed that the XGBoost model optimized using XGBoost - AOA outperformed other models in terms of accuracy, with RMSE, MAE, and VAF values of 0.0078, 0.0015, and 99.6189 for the training part and 0.0141, 0.0112, and 98.0394 for the testing part, respectively. These findings suggest that XGBoost - AOA is the most accurate model for predicting the pile set-up component.

• The Korean Journal of Physiology
• /
• v.20 no.2
• /
• pp.218-224
• /
• 1986

The characteristics of anion exchange with internal $HCO_3\;^{-}\;(or\;OH^-)$ was studied by determining the time course of hemolysis in isoosmotic ammonium salt solution in human erythrocytes. The effects of inhibitors, pH and temperature on the exchange between internal $HCO_3\;^-\;(or\;OH^-)$ and external $Cl^-$ were observed and the permeabilities of various organic and inorganic anions were also measured. The results were compared with data previously reported from the experiments using radioisotopes. The results are as follows; 1) SITS $H_2DIDS$ and furosemide inhibited the hemolysis of erythrocytes in isoosmotic $NH_4Cl$ solution in a dose·dependent manner, and the concentrations for lengthening twice the time for $half-hemloysis(t_{1/2})\;were\;2.3{\times}10^{-7},\;1.3{\times}10^{-7}\;and\;2.5{\times}10^{-5}M$, respectively. 2) Acetazolamide also shifted the time-dependent hemolytic curve to the right in a dose-dependent manner, and the concentrations for lengthening twice $t_{1/2}\;was\;2.4{\times}10^{-5}M$. 3) The time-dependent hemolysis was delayed by decreasing pH from 7.0 to 6.2, but w·as not affected by the change of pH in the range of 7.0 to 8.2. 4) The time for $half-hemloysis(t_{1/2})$ showed a temperature-dependency and Arrhenius plot exhibited a break point at $20^{\circ}C$. The apparent activation energy calculated from this plot was 18.1 kcal/mol between $2^{\circ}C-20^{\circ}C$ and 11.2 kcal/mol between $20^{\circ}C-37^{\circ}C$, respectively. 5) The apparent permeabilities of various inorganic anions based on $t_{1/2}$ were in the order of $Cl^->NO_{3}\;^->SCN^->SO_4\;^{2-}>SSO_3\;^{2-}>HPO_4\;^{2-}$. which was similar with the previous reports based on the experiment using radioisotopes. The results Obtained from this study are comparable with the previous data reported from the experiments using radioisotopes. This indicates that the hemolysis of erythrocytes in isoosmotic ammonium salt solution can be used as a simple and good method for the study of anion exchange in erythrocyte membrane.

• Clinical and Experimental Pediatrics
• /
• v.48 no.6
• /
• pp.624-633
• /
• 2005

Purpose : This study analyzed the expression of HLA-DR and DQ genotypes and anti-thyroid autoantibodies[anti-thyroid peroxidase(TPO) and anti-thyroglobulin(TG) antibodies] in Korean patients with type 1 diabetes(T1DM) to investigate the susceptible HLA alleles to T1DM in Korea and the prevalence of thyroid autoantibodies and their significance for the development of thyroid disorders. Methods : A total of 59 Korean patients with type 1 diabetes[26 males, median age 13.7 years(range 5.7-29.9 years), diabetes duration 7.6 years(-1.7-22.5 years)] were enrolled in this study, and 200 healthy Koreans without a family history of diabetes were selected as a normal control for the comparison of HLA genotypes. Seventeen patients with anti-TPO or anti-TG were followed [median duration 3.96 years(1 day-10.7 years)] with measurement of anti-TPO, anti-TG, $T_3$, $T_4$ or free $T_4$, TSH levels and physical examinations. HLA-DR and DQ genotyping were done by PCR-SSO, PCR-SSCP, PCR-RFLP and PCR-SSP methods. Results : HLA analysis showed higher frequencies of HLA-DRB1*0301, *090102 and DQB1*0201, *030302 alleles, DRB1*0301/*090102, *090102/*090102 and DQB1 *0201/*030302, *030302/*030302, *0201/ *0302 genotypes in T1DM patients compared to controls(Pc<0.05). Fifteen(25.4 percent) had anti-TPO antibody, 12(20.3 percent) had anti-TG, 17(28.8 percent) had either autoantibody and 10(16.9 percent) had both autoantibodies. No clinical or subclinical hypothyroidism developed during follow-up after the first detection of anti-thyroid autoantibody. There was no significant correlation between thyroid autoimmunity and gender, onset age of T1DM, and diabetes duration, respectively(P>0.05). Conclusion : We thought this unique HLA-DR, DQ allele distribution might be an important factor for the low incidence of T1DM in Korea. And a high prevalence of thyroid autoantibodies in these populations suggests examinations of thyroid antibodies should be performed regularly. Optimal age for the initial screening and the frequency of re-screening for associated thyroid autoimmune diseases in T1DM remains to be determined through prospective follow-up.

• Tuberculosis and Respiratory Diseases
• /
• v.54 no.4
• /
• pp.367-377
• /
• 2003

Background : It is well known that only 10% of those infected with Mycobacterium tuberculosis actually develop clinical disease, indicating the existence of host genetic factors regulating disease expression. In this study, we investigated HLA-DRB1 and -DQB1 gene polymorphisms in Korean patients with pulmonary tuberculosis (PTB). Methods : HLA-DRB1 and -DQB1 gene polymorphisms were investigated in 67 PTB patients without previous treatment history, 38 drug-sensitive (DS) and 29 multidrug-resistant (MDR) cases, and 200 healthy controls. HLA-DRB1 typing was done using reverse SSO (sequence specific oligonucleotide) and PCR-SSCP (single strand conformational polymorphism) methods and DQB1 typing was done using PCR-RFLP (restriction fragment length polymorphism), PCR-SSCP and PCR-SSP (sequence specific primer) methods. Results : Among the PTB patients, MDR-TB cases showed frequencies of DRB1*0701 and *08032 increased by about two-fold compared to those of normal controls, and likewise for their associated DQB1 alleles, DQB1*0202 and *0601 (15.5% vs. 34.5%, p=0.01). The frequency of HLA-DQB1*0609 was significantly increased in PTB patients (4.0% vs. 14.9%, p=0.004), showing similar increases in both DS and MDR cases. There was also an association of HLA alleles with the clinical severity of the disease according to the extent of lung lesion. Significantly increased frequencies of DRB1*08032 (4.2% vs. 32.6%, p=0.007) and DQB1*0601 (12.5% vs. 34.9%, p=0.047) were observed in more advanced (moderately & far advanced/DS and far advanced/MDR), compared with less advanced (minimal/DS and moderately advanced/MDR) lung lesions. Although DRB1*0701, DQB1*0202 and DQB1*0609 showed significant increases in different subsets of the disease, these HLA alleles did not show consistent association with disease severity. Conclusion : HLA-DRB1*08032 and DQB1*0601 alleles were associated with genetic susceptibility to MDR-TB in Korean patients, and also with disease severity and progression of PTB.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.24-31
• /
• 2020

Centralized systems in computing environments have various problems, such as privacy infringement due to hacking, and the possibility of privacy violations in case of system failure. Blockchain, one of the core technologies for the next generation of converged information, is expected to be an alternative to the existing centralized system, which has had various problems. This paper proposes a blockchain-based user authentication system that can identify users using EID in an online environment. Existing identification (ID)/password (PW) authentication methods require users to store personal information in multiple sites, and receive and use their respective IDs. However, the proposed system can be used without users signing up at various sites after the issuing of an EID. The proposed system issues an EID with a minimum of information, such as an e-mail address and a telephone number. By comparing the stability and efficiency of a centralized system, the proposed integrated authentication system proved to be excellent. In order to compare stability against existing systems, we chose attack methods and encroachments on the computing environment. To verify efficiency, the total throughput between the user's app, the issuance and certification-authority's servers, and the service provider's servers was compared and analyzed based on processing time per transaction.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.26 no.4
• /
• pp.54-63
• /
• 2022

A 3-tonf class liquid rocket engine that powers the upper stage of a small launcher and lifts 500 kg payload to 500 km SSO is designed. The small launcher is to utilize the flight-proven technology of the 75-tonf class engine for the first stage. A combination of liquid oxygen and liquid methane has been selected as their cryogenic states can provide an extra boost in specific impulse as well as enable a weight saving via the common dome arrangement. An expander cycle is chosen among others as the low-pressure operation makes it robust and reliable while a specific impulse of over 360 seconds is achievable with the nozzle extension ratio of 120. Key components such as combustion chamber and turbopump are designed for additive manufacturing to a target cost. The engine system provides an evaporated methane for the autogenous pressurization system and the reaction control of the stage. This upper stage propulsion system can be extended to various missions including deep space exploration.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.56-63
• /
• 2018

The management of Combined Sewer Overflows(CSOs) and Separated Sewer Overflows(SSOs) discharge directly to the effluent system in an untreated state, which occurs when the facility capacity is exceeded due to heavy rain, has become an important issue in recent years as the heavy rain becomes a regular phenomenon. Despite the continuous development of filtration technology, targeting densely populated urban areas, CSOs are rarely applied. Therefore, this study was carried out to optimize the process to apply CSOs in a pilot-scale horizontal flow filtration system with a rope-type synthetic fiber. The research was carried out in two steps: a preliminary study using artificial samples and a field study using sewage. In the preliminary study using an artificial sample, head loss of the filter media itself was analyzed to be approximately 1.1cm, and the head loss was increased by approximately 0.1cm as the linear velocity was increased by 10m/hr. In addition, the SS removal efficiency was stable at 81.4%, the filtration duration was maintained for more than 6 hours, and the average recovery rate of 98% was obtained by air backwashing only. In the on-site evaluation using sewage, the filtration duration was approximately 2 hours and the average removal efficiency of 83.9% was obtained when belt screen (over 450 mesh) was applied as a pre-treatment process to prevent the premature clogging of filter media. To apply the filtration process to CSOs and SSOs, it was concluded that the combination with the pre-treatment process was important to reinforce the hydraulic dimension for the stable maintain of operation period, rather than efficiency. Compared to the dry season, the quality of incoming sewage was lower in the rainy season, which was attributed to the characteristics of the drainage area with higher sanitary sewerage. In addition, the difference in removal efficiency according to the influent quality of the wet season and dry season was small.

• The Korean Journal of Food And Nutrition
• /
• v.19 no.3
• /
• pp.279-287
• /
• 2006

This study was carried out to investigate the influences of modified starches on suppression of retrogradation in Korean rice cake for their optimization, Garaeduk. Based upon studying Avrami equation, the Avrami exponent n value of all the experiment samples was found to be 1.03 ${\sim}$ 1.37 in the influence of modified starches on retrogradation of the rice cake. This means that the retrogradation of the Korean rice cake occurred instantly after the crystallization of starch particles in the Korean rice cake formulated by modified starches. The highest Avrami exponent n value was indicated in the control sample. The rate constant k of retrogradation in the Korean rice cake formulated by modified starches showed comparatively low and appeared to be the lowest in the Korean rice cake formulated by SHPP. This tendency was shown well in the time constant(1/k) of retrogradation velocity. According to the DSC analysis, the onset temperature of gelatinization in thermal characteristics showed somewhat high in case of addition of modified starch into the Korean rice cake on storage time and the SHPP was slowly gone up. In peak temperature of gelatinization in thermal characteristics of the DSC analysis, SSOS and ASA were increased a little in comparison with the control. The control was comparatively high increase. Melting enthalphy of all samples added with modified starches (SSOS: 21.1${\rightarrow}$23.7${\rightarrow}$24.1, ASA: 21.1${\rightarrow}$24.8${\rightarrow}$25.4) appeared to be lower than that of the Korean rice cake without modified starches(21.2${\rightarrow}$26.1${\rightarrow}$27.1). The Korean rice cake added with SHPP was shown to be the lowest in the increasing rate of melting enthalpy(20.9${\rightarrow}$21.4${\rightarrow}$22.1). Heat spreadability of all the samples in Martin melting diameter was revealed to be good in order of control, ASA, SSOS, SHPP and especially the Korean rice cake added with SHPP was shown to be the best in heat spreadability. In color, sensory examination and textural characteristic of the Korean rice cake added with modified starches, the L$^*$value was not changed practically with the storage time and seemed to be stable. The a$^*$ value of the samples was followed by control(2.21${\rightarrow}$5.34: 141.6%), ASA (2.01${\rightarrow}$4.22: 110.0%), SSOS (2.78${\rightarrow}$4.87: 75.2%) and SHPP (2.12${\rightarrow}$3.40: 60.4%) in order of color change. Also the b$^*$ value of the samples was followed by control(4.32${\rightarrow}$6.35: 47.0%), ASA (4.66${\rightarrow}$5.73: 23.0%), SSOS (4.90${\rightarrow}$5.89: 20.2%) and SHPP (4.89${\rightarrow}$5.12: 4.7%) and there was the least (or no) color change with the SHPP. Textural characteristics of samples was shown to be the highest in case of modified starch addition and especially SHPP appeared to be the best in texture.