• Journal of the Korean Society of Radiology
• /
• v.17 no.2
• /
• pp.191-199
• /
• 2023

This study aimed to propose minimized radiation doses with an optimized abdomen x-ray image, which realizes a Deep Blind Image Super-Resolution Generative adversarial network (BSRGAN) technique. Entrance surface doses (ESD) measured were collected by changing exposure conditions. In the identical exposures, abdominal images were acquired and were processed with the BSRGAN. The images reconstructed by the BSRGAN were compared to a reference image with 80 kVp and 320 mA, which was evaluated by mean squared error (MSE), peak signal-to-noise ratio (PSNR), and structural similarity index measure (SSIM). In addition, signal profile analysis was employed to validate the effect of the images reconstructed by the BSRGAN. The exposure conditions with the lowest MSE (about 0.285) were shown in 90 kVp, 125 mA and 100 kVp, 100 mA, which decreased the ESD in about 52 to 53% reduction), exhibiting PSNR = 37.694 and SSIM = 0.999. The signal intensity variations in the optimized conditions rather decreased than that of the reference image. This means that the optimized exposure conditions would obtain reasonable image quality with a substantial decrease of the radiation dose, indicating it could sufficiently reflect the concept of As Low As Reasonably Achievable (ALARA) as the principle of radiation protection.

• Journal of the Korean Society of Radiology
• /
• v.16 no.4
• /
• pp.387-394
• /
• 2022

120 kVp FBP reconstruction image standard by using raw data after scanning by changing tube voltage among the NECK CT protocols that are broad applied in clinical practice using a human phantom including thyroid gland The usefulness of the DLIR reconstruction technique was investigated. As a result, CTDIvol decreased when the DLIR reconstruction technique was applied, and in particular, the image quality obtained under the same standard scanning conditions at a lower dose for ASIR-V and DLIR reconstruction was reached than when FBP was applied at the same kVp In addition, as a result of SNR and CNR analysis, the DLIR reconstructed image was analyzed with high SNR and CNR values, and SSIM analysis, the SSIM index of the 100 kVp, DLIR reconstructed image was measured to be close to 1, and it was analyzed that the similarity of the reconstructed image to the original image was high (p>0.05). If the results of this study are used to supplement clinical image evaluation and further develop an algorithm applicable to various anatomical structures, it is thought that it will be useful for clinical application as it is possible to maintain the image quality while lowering the examination dose.

• Journal of The Korean Astronomical Society
• /
• v.46 no.5
• /
• pp.191-200
• /
• 2013

Full-disk solar images are provided by many solar telescopes around the world. However, the observed images show Non-Radial Variation (NRV) over the disk. In this paper, we propose algorithms for detecting distortions and restoring these images. For detecting NRV, the cross-correlation coefficients matrix of radial profiles is calculated and the minimum value in the matrix is defined as the Index of Non-radial Variation (INV). This index has been utilized to evaluate the H images of GONG, and systemic variations of different instruments are obtained. For obtaining the NRV's image, a Multi-level Morphological Filter (MMF) is designed to eliminate structures produced by solar activities over the solar surface. Comparing with the median filter, the proposed filter is a better choice. The experimental results show that the effect of our automatic detection and restoration methods is significant for getting a flat and high contrast full-disk image. For investigating the effect of our method on solar features, structural similarity (SSIM) index is utilized. The high SSIM indices (close to 1) of solar features show that the details of the structures remain after NRV restoring.

• Journal of Biomedical Engineering Research
• /
• v.42 no.3
• /
• pp.80-85
• /
• 2021

We developed a model to classify the absence of cervical cancer using deep learning from the cervical image to which the histogram equalization algorithm was applied, and to compare the performance of each model. A total of 4259 images were used for this study, of which 1852 images were normal and 2407 were abnormal. And this paper applied Image Sharpening(IS), Histogram Equalization(HE), and Contrast Limited Adaptive Histogram Equalization(CLAHE) to the original image. Peak Signal-to-Noise Ratio(PSNR) and Structural Similarity index for Measuring image quality(SSIM) were used to assess the quality of images objectively. As a result of assessment, IS showed 81.75dB of PSNR and 0.96 of SSIM, showing the best image quality. CLAHE and HE showed the PSNR of 62.67dB and 62.60dB respectively, while SSIM of CLAHE was shown as 0.86, which is closer to 1 than HE of 0.75. Using ResNet-50 model with transfer learning, digital image-processed images are classified into normal and abnormal each. In conclusion, the classification accuracy of each model is as follows. 90.77% for IS, which shows the highest, 90.26% for CLAHE and 87.60% for HE. As this study shows, applying proper digital image processing which is for cervical images to Computer Aided Diagnosis(CAD) can help both screening and diagnosing.

• Journal of the Korean Society of Radiology
• /
• v.17 no.6
• /
• pp.819-825
• /
• 2023

In this study, among chest CT examination conditions, the tube voltage was changed to 100 and 80 kVp and the reconstruction algorithm was changed to FBP, ASIR-V, and DLIR to compare and analyze changes in examination dose and image quality. As a result, when applying ASIR-V and DLIR at a tube voltage of 100 kVp, which is lower than the existing tube voltage, the dose is lowered while achieving image quality most similar to that when applying 120 kVp and FBP. especially, DLIR reconstructed images had excellent SNR and CNR at all tube voltages. In addition, the SSIM index was analyzed to be closest to 1, showing the highest similarity to the original image. Therefore, when performing repeated chest CT examinations, the application of DLIR can reduce the examination dose by about 29.7%, which is expected to help solve some of the biggest problems with CT examinations, namely radiation exposure due to the examination.

• Proceedings of The Korean Society of Agricultural and Forest Meteorology Conference
• /
• 2019.08a
• /
• pp.249-249
• /
• 2019

• Proceedings of the Korea Information Processing Society Conference
• /
• 2010.11a
• /
• pp.474-477
• /
• 2010

본 논문에서는 패턴인식을 이용한 의류의 결함을 자동으로 탐색하는 시스템을 설계하였다. 이는 히스토그램을 기반으로 하여 영상의 특징을 추출하고 템플릿 매칭을 이용해서 패턴을 추적하도록 하였스며, 또한, SSIM(Structural Similarity) Index를 통해 추적된 패턴과 원 패턴의 유사도를 HVS(Human Vision System)을 기준으로 하여 결함을 판별할수 있도록 하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.3C
• /
• pp.241-248
• /
• 2007

In predictive image coding, a LS (Least Squares)-based adaptive predictor is an efficient method to improve image edge predictions. This paper proposes a hybrid interpolation with weighted edge detector. A hybrid approach of switching between bilinear interpolation and EDI (Edge-Directed Interpolation) is proposed in order to reduce the overall computational complexity The objective and subjective quality is also similar to the bilinear interpolation and EDI. Experimental results demonstrate that this hybrid interpolation method that utilizes a weighted edge detector can achieve reduction in complexity with minimal degradation in the interpolation results.

• Journal of Fashion Business
• /
• v.15 no.4
• /
• pp.43-54
• /
• 2011

Printing process has been a major sector in the textile industries for a long period of time. With the advent of digital textile printing, the complex procedures of printing preparations and after-treatment processes have been streamlined. For the design of the motives of images to be printed, the use of image handling software, e.g. Photoshop(Adobe), has been of prime importance. Even though the software is extremely useful and functionally versatile, there are many laborious steps involved for the specific textile printing process. The use of a CAD-based textile printing function may help the textile printing process in streamlining the complex processing stages. The image qualities of the output designs have been compared objectively with the aid of several image similarity evaluation schemes including the SSIM, and FSIM Index methods.

• Journal of the Korea Society of Computer and Information
• /
• v.24 no.3
• /
• pp.41-47
• /
• 2019

In this paper, we propose a application of conditional generative adversarial network (cGAN) for generation of contrast enhanced computed tomography (CT) image. Two types of CT data which were the enhanced and non-enhanced were used and applied by the histogram equalization for adjusting image intensities. In order to validate the generation of contrast enhanced CT data, the structural similarity index measurement (SSIM) was performed. Prepared generated contrast CT data were analyzed the statistical analysis using paired sample t-test. In order to apply the optimized algorithm for the lymph node cancer, they were calculated by short to long axis ratio (S/L) method. In the case of the model trained with CT data and their histogram equalized SSIM were $0.905{\pm}0.048$ and $0.908{\pm}0.047$. The tumor S/L of generated contrast enhanced CT data were validated similar to the ground truth when they were compared to scanned contrast enhanced CT data. It is expected that advantages of Generated contrast enhanced CT data based on deep learning are a cost-effective and less radiation exposure as well as further anatomical information with non-enhanced CT data.