• Journal of Biosystems Engineering
• /
• v.36 no.2
• /
• pp.130-139
• /
• 2011

Three modes of VIS/NIR spectroscopic measurement (interactance and two modes of transmission) were compared for their ability to estimate soluble solids content (SSC) of 'Shingo' pear non-destructively. The two transmission modes are named as full- and semi-transmission, where full-transmission stands for passing of light through abdomen of pear and semi-transmission is for transit of light mainly through flesh of pear. For comparison of the modes, prediction models developed from the collected spectroscopic data by the three modes were developed and tested for comparison of their performance. Partial least square regression (PSLR) was used to develop the models and various pre-processing methods were applied to develop models of high accuracy. The experiment was repeated three times with pears produced in different regions. The experiments resulted that selection of pre-processing is very important to attain accurate models, and multiplicative scatter correction (MSC) was selected as a pre-processor of high accuracy for the three modes of spectroscopic measurement in every experiment. Except for MSC, different group of pre-processing methods were selected for the three modes of measurement in every experiment without any tendency to the tested modes of measurement and pears of different produced region. Root-mean-square error of prediction (RMSEP) of prediction models of the three modes of measurement using prepreocessor of MSC were compared for their ability to estimate SSC. The models resulted in ranges of $0.37{\sim}0.57^{\circ}Brix$, $0.65{\sim}0.72^{\circ}Brix$, $0.39{\sim}0.51^{\circ}Brix$ for interactance, full- and semi-transmission, respectively. As shown, modes of semi-transmission and interactance resulted about the same level of prediction accuracy and were noted as modes of high performance to predict SSC.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.6
• /
• pp.478-485
• /
• 2017

The effect of high carbon dioxide and ethylene treatment on postharvest ripening regulation of red kiwifruit (Actinidia melanandra) was investigated during cold storage. Physio-chemical properties such as weight loss, firmness, SSC, acidity, and market quality were analysed in red kiwifruit held at $10^{\circ}C$ compared to the fruit treated with carbon dioxide and ethylene during 75 days of storage. No significant weight loss was detected in red kiwifruit treated with carbon dioxide until 75 days of storage while the most rapid loss was found in fruit treated with ethylene. In ethylene-treated fruit, the firmness was dramatically reduced from 4.2kg on the first day to 1.2 kg after 27 days of storage at $10^{\circ}C$. However, the firmness of the carbon dioxide-treated fruit was 1.8kg after 54 days of storage. The highest level of SSC(%) was investigated within the 27 storage days at $10^{\circ}C$ for fresh red kiwifruit treated with exogenous ethylene, whereas the carbon dioxide-treated fruit exhibited a greatly increased SSC after 64 days. The carbon dioxide-treated red kiwifruit maintained statistically(p<.01) higher levels of acidity compared to the control and the exogenous ethylene-treated ones during 41 days of storage at $10^{\circ}C$. The SSC/Acid ratio of fruit treated with carbon dioxide was significantly lower (p<.01) maintained than the other two treatments (ethylene-treated and control fruit)throughout the 75-day experiment. Based on the quality characteristics of postharvest red kiwifruit, it could be concluded that the carbon dioxide treatment significantly delayed the ripening process and maintained the market quality of harvested red kiwifruit, which can be a potential application for commercial use in the kiwi industry.

• Asian-Australasian Journal of Animal Sciences
• /
• v.17 no.6
• /
• pp.799-807
• /
• 2004

The objective of this field experiment was to investigate the growth, hay yield and chemical composition of cassava and stylo 184 grown under intercropping. The experiment was arranged in a Randomized Complete Block (RCB) design with 5 treatments and 4 replications. The treatments were: sole crop cassava (C); sole crop stylo 184 (S) and three intercropping treatments comprising an additive series of one (SC), two (SSC) and three (SSSC) rows of stylo 184 to one row of cassava. The results showed that leaf area per plant (LA) of cassava was significantly higher (p<0.05) in the sole crop relative to the intercropping treatments. Both total hay yield and CPDM yield were significantly higher (p<0.05) for C treatment and lower (p<0.05) for SSSC treatment. The total hay yield and CPDM yield were significantly greater (p<0.05) in the sole crop relative to the intercropping treatments. At the first and second harvests, CP content was similar among treatments; while at third and fourth harvests, CP contents were significantly greater (p<0.05) for the intercropping treatment relative to the sole crop. At the first and second harvest, NDF contents were significantly greater (p<0.05) in the sole crop relative to the intercropping treatments, whereas NDF contents were similar among intercropping treatments. Leaf area of stylo 184 at first and second harvest were significantly greater (p<0.05) for C, SC and SSC as compared with the SSSC treatments. At each harvesting, there were no significant differences in ash, CP, NDF, ADF and ADL contents of stylo 184 hay between the sole crop and intercropping treatments, except for the first harvest. ADF contents were significantly greater (p<0.05) in S, SC treatments relative to SSC and SSSC treatments. Both collective hay yield and CPDM yield of cassava and stylo 184 were significantly greater (p<0.05) for the SSC treatment and significantly lower (p<0.05) for the S treatment. Collective hay yield and CPDM yield were significantly greater (p<0.05) for the intercropping treatments relative to the sole crop. Based on this research, it was concluded that stylo 184 showed potential for intercropping with cassava. Intercropping cassava with stylo 184 has beneficial effects and can improve foliage biomass yield and soil fertility, which would be a more sustainable system than growing the cassava as a pure stand. In terms of hay yield and CP production, two rows of stylo 184 to one row of cassava could be the optimal pattern for this intercropping system.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.37 no.5
• /
• pp.775-786
• /
• 2017

Monitoring sediment flux is crucial especially for maintaining river systems to understand morphological behaviors. Recently, hydroacoustic backscatter (or SNR) as a surrogate to empirically estimate suspended sediment concentration has been increasingly highlighted for more efficient acquisition of sediment dataset, which is difficult throughout direct sediment sampling. However, relevant contemporary researches have focused on wide range solution applicable for large natural rivers where H-ADCPs with relatively low acoustic frequency have been widely utilized to seamlessly measure streamflow discharge. In this regard, this study aimed at investigating hydroacoustical characteristics based on a very recently released H-ADCP (SonTek SL-3000) with high acoustic frequency of 3 MHz in order to capitalize its capacity to be applied for suspended sediment monitoring in laboratory conditions. SL-3000 was tested in a laboratory flume to collect SNR in conjunction with LISST-100X for actual sediment concentration and particle distribution in both sand and silt sediment injection in various amount. Conventional algorithms to correct signal attenuations for water and sediment were carefully tested to validate whether they can be applied for SL-3000. As result of analyzing the SNR-SSC correlation trand, through further study in the future, it is confirmed that SSC can be observed indirectly by using the SNR.

• Korean Journal of Environmental Agriculture
• /
• v.33 no.1
• /
• pp.57-62
• /
• 2014

BACKGROUND: Defoliation in grapevine cultivation is practically used to improve light environment within the canopy and thereby fruit quality. Effects of defoliation in five-year-old 'Pione' grapevine during cultivation with heating were investigated to find out optimum ratio of leaf area to fruit cluster weight (L/F). METHODS AND RESULTS: The grapevines were defoliated with berry-thinning 20 days after full bloom to provide various levels of L/F. At harvest, total leaf area values of fruit bearing branches were between 0.23 and $0.60m^2$. With increasing L/F, soluble solids and anthocyanin contents curvilinearly increased ($R^2=0.76^{**}$). At L/F over $0.6m^2/kg$, soluble solids content (SSC) leveled off. With increasing L/F, titratable acidity (TA) linearly decreased ($R^2=0.87^{**}$), but the ratio of SSC to TA linearly increased ($R^2=0.86^{**}$). Anthocyanin content was significantly correlated with SSC and the ratio of SSC to TA ($R^2=0.80^{**}$ and $0.82^{**}$, respectively). When total leaf area per fruit bearing branch was maintained $0.40m^2$, soluble solids and anthocyanin contents linearly decreased ($R^2=0.79^{**}$ and $0.85^{**}$, respectively), but TA linearly increased with increasing fruit cluster weight ($R^2=0.70^{**}$). Fruit was low in quality when the L/F was below $0.6m^2/kg$. CONCLUSION: L/F is recommended to be maintained at least $0.6m^2/kg$ in 'Pione' grapevine during cultivation with heating to produce higher-quality fruits.

• Journal of Bio-Environment Control
• /
• v.11 no.4
• /
• pp.157-162
• /
• 2002

The efficient timer-controlled irrigation and the favorable fruiting position were investigated far highly quality melon fruits from Feb.18 to July Si 1999. The nutrient solution was supplied either at every hour from 6：00 to 18：00 (T-1) or at 6：00, 8：00, 10：00, 11：00, 12：00, 12：30, 13：00, 13：30, 14：00, 14：30, IS：00,16：00, and 17：00 (T-2). A fruit was set at the first node of the fruit bearing branch from the 10, 12, or 13th node of the main stem. Pot weight was maintained at almost n constant level, regardless of the daily integrated solar radiation in T-2. Soluble solids content (SSC) and fresh weight of fruit were not significantly different among the irrigation treatments at each harvesting time. At the first harvest, SSC and fresh weight of fruit were not significantly different between the fruiting positions within the irrigation treatment. At the second harvest, SSC was higher in T-2 than T-1. The SSC was low in the fruit of the loth node in T-1, while it was not significantly different between fruiting positions in T-2. Fruit fresh weight was the highest at the 12 and 13th nodes in T-1, and the 13th node in T-2. Fresh and dry weights of leaf except petiole, regardless of harvesting time, increased as the node position was higher, The higher the fruiting position was, the lower the leaf weight was. Therefore, it is recommended to irrigate more frequently during the mid-noon. Fruits can be harvested earlier at the lower nodes in the spring crop production.

• Animal Bioscience
• /
• v.36 no.1
• /
• pp.29-42
• /
• 2023

Objective: Pigs, an ideal biomedical model for human diseases, suffer from about 50% early embryonic and fetal death, a major cause of fertility loss worldwide. However, identifying the causal variant remains a huge challenge. This study aimed to detect single nucleotide polymorphisms (SNPs) and candidate genes for the number of mummified (NM) piglets using the imputed whole-genome sequence (WGS) and validate the potential candidate genes. Methods: The imputed WGS was introduced from genotyping-by-sequencing (GBS) using a multi-breed reference population. We performed genome-wide association studies (GWAS) for NM piglets at birth from a Landrace pig populatiGWAS peak located on SSC11: 0.10 to 7.11 Mbp (Top SNP, SSC11:1,889,658 bp; p = 9.98E-13) was identified in cyclin dependent kinase on. A total of 300 Landrace pigs were genotyped by GBS. The whole-genome variants were imputed, and 4,252,858 SNPs were obtained. Various molecular experiments were conducted to determine how the genes affected NM in pigs. Results: A strong GWAS peak located on SSC11: 0.10 to 7.11 Mbp (Top SNP, SSC11:1,889,658 bp; p = 9.98E-13) was identified in cyclin dependent kinase 8 (CDK8) gene, which plays a crucial role in embryonic retardation and lethality. Based on the molecular experiments, we found that Y-box binding protein 1 (YBX1) was a crucial transcription factor for CDK8, which mediated the effect of CDK8 in the proliferation of porcine ovarian granulosa cells via transforming growth factor beta/small mother against decapentaplegic signaling pathway, and, as a consequence, affected embryo quality, indicating that this pathway may be contributing to mummified fetal in pigs. Conclusion: A powerful imputation-based association study was performed to identify genes associated with NM in pigs. CDK8 was suggested as a functional gene for the proliferation of porcine ovarian granulosa cells, but further studies are required to determine causative mutations and the effect of loci on NM in pigs.

• Journal of Conservation Science
• /
• v.37 no.6
• /
• pp.821-830
• /
• 2021

The weapons excavated from the de-militarized zones (DMZ) of Korea are vulnerable to corrosion due to the immediate and drastic environmental change. Especially, the chloride ions (Cl^-) in iron weapons cause active corrosion and require removal. In this study, conservation treatment and de-salination was performed for the discovered weapons from excavation sites of soldiers killed in action during the Korean War. Furthermore, an attempt was made to prepare the most stable plan for conservation treatment through the comparative study of soaking weapons in distilled water without chemicals and in a solution of sodium (SSC) at different temperatures. In the preliminarily experiments, the comparison of the eluted Cl^- ions according to different conditions of de-salination showed that the highest number of ions were detected from the de-salination with SSC at a temperature of 100℃, and its duration was much smaller, i.e., 1~2 weeks. Accordingly, for the parts from the guns and rifles amongst other objects, a six-time de-salination was conducted in the SSC solution for 8 hours at 100℃ and subsequently, for 16 hours at room temperature during which the distilled water and SSC were exchanged every week. However, in the case of a loaded rifle, the de-salination was not conducted, considering the risk that the high temperature and pressure by impregnation in vacuum could cause an explosion

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.27 no.4
• /
• pp.62-69
• /
• 2023

This study investigated the electromechanical properties of cement based smart repair materials (SRMs) according to the different amounts of fine steel slag aggregates (FSSAs). SRMs can self-diagnose the quality of repairing and self-sense the damage of repaired zone. The replacement ratios of FSSAs to sand for SRMs were 0% (FSSA00), 25% (FSSA25), and 50% (FSSA50) by sand weight. The electrical resistivity of SRMs generally decreased as the compressive stress of SRMs increased: the electrical resistivity of FSSA25 at the age of 7 hours decreased from 78.16 to 63.68 kΩ-cm as the compressive stress increased from 0 to 22.37 MPa. As the replacement ratio of FSSAs by weight of sand increased from 0% to 25%, the stress sensitivity coefficient (SSC) of SRM at the age of 7 h increased from 0.471 to 0.828 %/MPa owing to the increased number of partially conductive paths in the SRMs. However, as the replacement ratio of FSSAs further increased up to 50%, the SSC decreased from 0.828 to 0.649 %/MPa because some of the partially conductive paths changed to continued conductive ones. SRMs are expected to self-sense the quality and future damage of repaired zone only by measuring the electrical resistivity of the repaired zone in addition to fast recovery in the mechanical resistance of structures.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.3
• /
• pp.321-335
• /
• 2023

Monitoring sediment loads in natural rivers is the key process in river engineering, but it is costly and dangerous. In practice, suspended loads are directly measured, and total loads, which is a summation of suspended loads and bed loads, are estimated. This study proposes a real-time sediment discharge monitoring system using the horizontal acoustic Doppler current profiler (H-ADCP) and support vector regression (SVR). The proposed system is comprised of the SVR model for suspended sediment concentration (SVR-SSC) and for total loads (SVR-Q_TL), respectively. SVR-SSC estimates SSC and SVR-Q_TL mimics the modified Einstein procedure. The grid search with K-fold cross validation (Grid-CV) and the recursive feature elimination (RFE) were employed to determine SVR's hyperparameters and input variables. The two SVR models showed reasonable cross-validation scores (R²) with 0.885 (SVR-SSC) and 0.860 (SVR-Q_TL). During the time-series sediment load monitoring period, we successfully detected various sediment transport phenomena in natural streams, such as hysteresis loops and sensitive sediment fluctuations. The newly proposed sediment monitoring system depends only on the gauged features by H-ADCP without additional assumptions in hydraulic variables (e.g., friction slope and suspended sediment size distribution). This method can be applied to any ADCP-installed discharge monitoring station economically and is expected to enhance temporal resolution in sediment monitoring.