• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.8 no.4
• /
• pp.774-781
• /
• 2004

The HF band SSB communication of coast radio station had operated with principal axis of maritime communication until early in the 1990. But, that is changed with development of data communication and satellite technique, which have operated a few by rapidly decrement of user with accomplishment of the CMDSS. Recently, the radio system of HF band is expanded to globe maritime communication, which is support to maritime safety information and data traffic service by low charge with the SSB high speed modem. This study have proposed the digitalize method for maritime communication system using HF band in domestic.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.12
• /
• pp.2549-2554
• /
• 2011

This paper describes on development of integrated interface and applications to support stable digital data communication service for small and midium sized crafts exploiting SSB modems and HF wireless sets. Firstly, integrated interface module between GPS (Global Positioning System) and communication devices was developed. Secondly, maritime map was implemented into a display terminal to provide location tracking service and voyage planning function. In addition, condition monitoring service of crafts and fishing report functions as well as alarm functions were developed to support secure fishery. Results of performance measure on developed application services shows that error rate was less than 3% and communication delay was shorter than 1 second when a message length was less than 1 Kbyte along with one-to-many communication type.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.04a
• /
• pp.37-42
• /
• 2004

The Ministry of Maritime Affairs ＆ Fisheries have plaining the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability considering. The fishery information communication system is build up to the raw data ＆ process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication fee using SSB in HF band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.90-94
• /
• 2003

For the structure of VMS is required to the maritime MDT for realtime acquisition the position reporting of navigating ships. The first study is the recording method a navigating data by GPS, the 2th is SSB modem for data trans-receiver by use ship. And then the communication protocol of automatic traffic for in continues transmission a ship's ID, time and position data of GPS. In this paper have studied the SSB modem for transmission the voice and data at same time. Which is adapted to the communication control unit, protocol of data traffic and acquisition, displayer of character data. This maritime GPS MDT is considered to low-cost type by using microprocessor.

• Journal of Navigation and Port Research
• /
• v.28 no.5
• /
• pp.443-448
• /
• 2004

The Ministry of Maritime Affairs & Fisheries have plaining the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability considering. The fishery info17nation communication system is build up to the raw data & process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication fee using SSB in HF band.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.693-697
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication, but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$ delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s$, $130{\mu}s$, $200{\mu}s$ delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s$, $160{\mu}s$, $250{\mu}s$ delay time at 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the German PACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1852-1857
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$, delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s\;130{\mu}s\;200{\mu}s$, delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s\;160{\mu}s\;250{\mu}s$ 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the emu FACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• Steel and Composite Structures
• /
• v.50 no.3
• /
• pp.281-298
• /
• 2024

Stainless steel bolts (SSB) are increasingly utilized in bolted steel connections due to their good mechanical performance and excellent corrosion resistance. Fire accidents, which commonly occur in engineering scenarios, pose a significant threat to the safety of steel frames. The post-fire behavior of SSB has a significant influence on the structural integrity of steel frames, and neglecting the effect of temperature can lead to serious accidents in engineering. Therefore, it is important to evaluate the performance of SSB at elevated temperatures and their residual strength after a fire incident. To investigate the mechanical behavior of SSB after fire, 114 bolts with grades A4-70 and A4-80, manufactured from 316L austenitic stainless steel, were subjected to elevated temperatures ranging from 20℃ to 1200℃. Two different cooling methods commonly employed in engineering, namely cooling at ambient temperatures (air cooling) and cooling in water (water cooling), were used to cool the bolts. Tensile tests were performed to examine the influence of elevated temperatures and cooling methods on the mechanical behavior of SSB. The results indicate that the temperature does not significantly affect the Young's modulus and the ultimate strength of SSB. Up to 500℃, the yield strength increases with temperature, but this trend reverses when the temperature exceeds 500℃. In contrast, the ultimate strain shows the opposite trend. The strain hardening exponent is not significantly influenced by the temperature until it reaches 500℃. The cooling methods employed have an insignificant impact on the performance of SSB. When compared to high-strength bolts, 316L austenitic SSB demonstrate superior fire resistance. Design models for the post-fire mechanical behavior of 316L austenitic SSB, encompassing parameters such as the elasticity modulus, yield strength, ultimate strength, ultimate strain, and strain hardening exponent, are proposed, and a more precise stress-strain model is recommended to predict the mechanical behavior of 316L austenitic SSB after a fire incident.

• Journal of Navigation and Port Research
• /
• v.27 no.4
• /
• pp.431-436
• /
• 2003

It's about time we had to think an alternative to recover out insufficient fishery market caused by IMF locally as well as the fishery agreement on Japan and China. The Ministry of Maritime Affairs ＆ Fisheries have planning the advancing fishery information integrated system for the fishing present condition, marine resource administration and applicability consideration. The fishery information communication system is build up to the raw data ＆ process-network-content. The communication system must be small size, low cost and adapted SSB transceiver, that is using fishery shipping. In this paper We present digital data communication network to exchange information for fishery and safety between fishing ship and coast station in cheeper communication fee using SSB(single Side Band) in HF(High Frequency) band.

• Journal of Korea Society of Industrial Information Systems
• /
• v.26 no.6
• /
• pp.1-9
• /
• 2021

In order to increase frequency transmission efficiency, single side band(SSB) transmission systems with the complex conjugate symmetry characteristics on a frequency domain have been studied. In addition, orthogonal block codes(space-time or space-frequency block code(SFBC)) for the diversity performance gain of transmission systems have been widely researched. In this paper, we implement a 3/4-rate SFBC SSB single-carrier(SC) frequency division multiple access(FDMA) system with 4 transmit antennas. It can be shown from the simulation results that the proposed SFBC SSB SC FDMA system using the 3/4-rate 4×4 orthogonal block code outperforms the conventional SSB SC FDMA system and the 2×2 SFBC SSB SC FDMA system with 2 transmit antennas.